hp6500a fax needs special phone cord

Similar Questions

• OfficeJet Pro 8610 - error setting up Fax Wizard I don't use a proper phone cord

  I have a single line by Time Warner Cable telephone system that is a set which includes the cable TV, internet connection of road runner and digital phone. I use a system of wireless phone with a stand-alone answering machine which works very well.

  I'll just put up my new printer Officejet Pro 8610 and crossed the Fax Setup Wizard to use my voice single line telephone and fax system just as I did with my old HP Multifunction printer it replaces.

  Everything seemed to connect and to work very well when one had the Fax Wizard to perform the test at the end of the installation procedure. As a precaution, I ran the consecutive times to test with the answering machine turned on and turned off and twice he spent in all categories, and once it failed to indicate that the phone cord was not the right kind.

  I used the RJ11 cable supplied with the printer, but it wasn't enough long reach the phone in the wall jack that I connected an additional RJ11 cord so it would reach. So the two cords to have only 2 pods as they should.

  I am trying to determine why I get together and pass and fails with the same set up?  If I need one RJ11 telephone plug cord in the wall to the printer?  Or am I running a subsequent wizard test too soon after a previous?

  I would appreciate any comments or suggestions about the reason that I feel this inconsistency.

  Thank you

  Hi coollx,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8610 is indicating that you are using the wrong phone cord. I'm happy to help you with this problem of Fax!

  It is possible that what you need is a cord of unique phone from the telephone jack in the wall to the printer.

  I recommend to read these faxes guides:

  • How to connect your fax HP to a line ISDN, ADSL, PBX or VoIP device.
  • Can't send or receive faxes.

  I hope this information helps and thank you for posting!

• can't get fax to work on 8500 a... using type of phone cord appropriate with fax error...

  has tried all possible configurations... 2 new cables and still nothing... past the fax hardware test, test socket connection wall, telephone connected to the appropriate port on the tests fax then fails with the help of correct type of phone cord test... any help would be much appreciated as I only want to use all the rest not disturbed fax function even if everything else works fine.

  What type of telephone service you have? Analog or digital?

  Also make sure that your phone cord has only two wires.

  Discover this document especially if you have phone service VoIP / DSL.

  Thank you!

• To use my computer, such as a fax machine with a printer wireless, I still need a phone wire connection?

  With the HUP, you can use your computer as

  a fax. but I have a wireless printer? should I still dial if I use my computer as a fax machine.

  Hello

  Yes, you would need a phone connection to use the fax machine.

   

  Check out these articles:
  How to send a fax in Windows XP
  http://support.Microsoft.com/kb/306657

  
  Use your computer to print, scan, fax

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/print-scan-fax

• 7520 fax connection prevents phone calls

  I have a Panasonic phone/digital answering machine put in place. The 7520 is a wireless connection.

  Fax HP wire is connected to the main phone BT which has of the basic unit of Panasonic. When I plugged just get a tone continued on the phone when you call so no calls are possible.

  "The fax test says ' NOT USING THE CORRECT TYPE OF PHONE CORD ' solution: use supplied cord - who I am!

  I can send and receive faxes.

  So the only solution I have now are ti offset and reconnect the telephone fax cable, which is a bit annoying!

  Any ideas please?

  Hi Brian-London, there.

  I noticed your message and want to touch base on this issue.

  By you mentioning "BT", I'm guessing that you are in the United Kingdom. If so, the connections should be connected somehow. I have a guide for you to watch in which different connection scenarios.

  Please consult this document: implementation of your fax to an analog to the United Kingdom

  I hope this helps you!

  Best wishes

• Phone cord 4632 Officejet printer

  I'm not sure that the power cord from the wall outlet at the rear of the printer seems like and therefore can not find mine.  The instructions say to use the 'phone cord supplied' or any phone cord will work just as well?

  Hi @clmcg ,

  I see by your post that you want to know what type of fax cable to use. I would like to help.

  For less interference, use a fax of 2 sons. You can use a 4-wire cable, but may have connection problems.

  Here is a picture of the cable 2 son.

  

  I hope this helps.

  Good day!
  Thank you.

• Error "you do not use the Type of appropriate phone cord.

  Having a problem with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it received a transmission error.  I run fax test and she came back with "you do not use the type of appropriate phone cord.  Nothing has changed since I last fax would be but I check the lines and connections, everything seems ok.  Phone jack is connected to 1 line and Officejet 2 - ext"is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call and receive calls on the phone to connect to the Officejet.  My hypothesis is that because I can use the phone without problem there nothing wrong with the phone line.  Any ideas?

  I had the same problem.  I am using a phone cord 2-wire supplied with the printer and still get this error.  It turns out that it is bound to have a telephone connected to the printer.  If I unplug the telephone shape of the intake extension on the back of the printer, then the fax test passes.   I used even a cord 2-wire on the telephone, but it seems that the mere fact of having a phone plugged into the outlet of expansion will cause this error.

  Run the test without a phone plugged into the outlet of extension of the printer and you should be fine.

  Worked for me!

• Photosmart 7525 Setup error: phone cord is connected to the wrong port, but is not

  I posted this to the Commission of scan/fax, but received no response.  I apologize if the permutation is against the rules.

  A post scriptum, is that the computer I used first the printer has Windows 8.

  I am installing a new HP Photosmart 7525e and tries to set up faxing.  I first used the existing phone cord connected to the wall jack that I had had my previous printer.  During Fax Setup Wizard, I get the error:

  Hi, sorry to hear the drawback on your printer printer e-all-in-one HP Photosmart 7525.  I am pleased that your unit is able to send and receive faxes.

  False failures occur, particularly in an environment of fax over IP, or when a device downstream such as a telephone or an answering machine is connected to the 2 - EXT printer port.

• Cavio external HD Basics - need special cable?

  Hello

  I just got a brand-new Basics Canvio 500 GB, and, despite I have read on many questions about the USB connection and stability, I'll just say that after a few days, I meet no particular problem, but I have a question.

  I tried borrowed drive, next to the help of the supplied cable with it, also with:

  -A standard 'A to Micro-B' cable Superspeed
  -One standard USB 2.0 Type a microphone cable

  It's because I keep the same cable connected to my PC (which has currently only USB 2.1 connections) and use it to different USB devices.

  Now, the Toshiba drive is having problems with both of them (intermittent loss of connection, slow/jerkyness data transfer and so forth).
  A Western Digital external hard drive works perfectly with the two cables mentioned above, next to his own.

  So, the question is, the Canvio Basics needs special cables to work properly and, if so, if I need a replacement, where can I find a cable that is certified to work correctly with him or is totally compatible anyway?

  Thank you very much in advance,
  Mario

  The answer found myself... After about a month the HD's * very * slowly.

  Keep the CAP pulled upwards or downwards made increases responsiveness and many disk, but of course this is not an option... so, I guess I've fallen in the infamous master default known HD, different cables, I tried data transfer are not guilty.

  Very sad... it is a product with very evil genius, apparently. About 70 euros ready for the trash. I really feel scammed.

  Not here anymore Toshibas, WD here I come...

  -Mario

• IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

  You need not buy new Chargers.

  You need to plug adapter American Electric type.

  http://www.worldstandards.EU/electricity/plugs-and-Sockets/

  All computers/Apple iOS devices come with voltage: 100-240 v AC.

• I need a power cord for a Macbook Pro 13 inch laptop

  I need a power cord for a Macbook Pro 13 inch laptop.  Does anyone know if you can order it from Apple, and how would you go ordering a part of Apple?

  Like this? http://www.Apple.com/shop/product/MC461LL/A/Apple-60W-MagSafe-power-adapter-for-MacBook-and-13-inch-MacBook-Pro?FNODE=85

• Need a phone number

  I'm having some trouble with my book Pro 6455 b and I went through the resources of enamel and nothings help I need a phone number for customer support, can someone help me with this?

  Hello

  Try the link below.

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Kind regards

  DP - K

• I need a phone number for the customer service so I can ask a question

  I'm having a problem activating Flight Simulator. On a computer, it crashed was put on laptop until could get one, got today and when I try to activate

  tell me used too many times. Need a phone number to talk to a human being. Thank you

  Hi Gail,

  What version of Windows operating system do you use?

  There is no phone Support available for Microsoft Flight Simulator. I suggest you refer to the article for information about how to contact Technical Support for Microsoft Flight Simulator.
  http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• I need the phone number for the activation of the system preinstall windows 7 64 in the USA

  I need the phone number for the activation of the system preinstall windows 7 64 in the USA

  1-866-530-6599

  See:
  ""Activation of Windows 7: frequently asked questions".
  And:
  "How to contact a Microsoft Product Activation Center.

• I need the phone number for the activation of the live person, since automation will not solve my problem uninstall win7 version of the retail and moving it to another computer

  I need the phone number for the activation of the live person because the automated system will not solve my problem uninstall/remove win7 retail version and moving it to another computer.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.