Satellite L750 - could not start recovery image installation

Similar Questions

• Re: Could not start recovery disc HARD on my Satellite U840

  Hello

  Would appreciate any help on the issue. My operationg system going nuts and I want it back using the toshiba HDD reserved sector Recovery Wizard. Followed the instructions http://aps2.toshiba-tro.de/kb0/HTD1303440001R01RU.htm and called for the wizard, but the next screen that appears is "Please insert disc 1 and click the next button.

  No other options or guests. The Lalonde is almost brand new and I have not and recovery points again. Laptop has any optical drive either.

  What could be the problem and how to restore windows from the hard drive of State out-of-box?
  Thank you.

  Stand by. I put t understand exactly what is happening.
  Can you please provide a detailed description (step by step) what is happening exactly?

  When the system recovery options menu is shown is the Toshiba HDD Recovery option here? What happens when you click on this option?

• Could not start recovery disc HARD on Equium A100-027

  Hello

  function of disk management on my Vista Home premium OS my recovery partition is healthy and always there. The problem is that I can't do a restore from the HARD drive?

  I hit the F8 key at startup and then fix it. I then select keyboard and enter my administrator/user password.
  Next, I get the Startup Repair, the etc system restore list. The option I want is the restoration of the full windows OS. When I click on this option, it opens another saying the full windows... operating system restore window then under that he said if pre-installed files are damaged, you can use the DVD-ROM product recovery to restore.

  Under which he says when you reinstall windows all data lost etc... When I hit OK it just goes back to the previous menu? I put t have a DVD only what lies on the recovery partition. Also I have no software to create CDs on the recovery system?

  Is - it there anyway I can make the recovery partition works? Thanks for any help...

  What recovery partition? Please don t mix image partition and WinRE recovery for any new OS install. This is not the same. Partition Windows re can be used to repair but not to the new installation of the OS.

  I m not 100% sure, but I think that this old notebook Equium has not been delivered with HARD drive recovery option and recovery DVDs was probably delivered.
  Did you buy this laptop as new or perhaps already used equipment?

  BTW: you will not be able to create recovery DVDs. This option was not available at the moment when the laptop was offered.

• Windows could not start during windows installation

  Recently, I had a number of issues of windows 7 on my computer with other things and I decided that it would be appropriate to do a complete reinstall of windows 7. I plugged my windows 7 installation cd and went to the installation. I deleted the partition of hard disk OS to remove my broken version earlier Windows 7 and made a new partition to install my new windows 7. I've been installing windows 7 and he said that it might take to restart my computer several times to complete the installation. The problem is that when it restarts, it is not actually proceed with the installation. Instead, it immediately opens a window of windows error recovery in the BIOS. The description is "windows did not start. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc, and then restart your computer. 2. choose your language settings, and then click Next. 3. click on repair your computer. "I then followed the instructions but when I did the repair your computer option, I tried but it says that this startup repair couldn't fix it automatically. I then tried to reboot in safe mode, and he went to the installation screen of windows as if he was about to continue installing windows, but then he said that I was in safe mode and I had to be in normal mode to continue the installation of windows 7. So now, I have only a part of windows 7 is installed.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Satellite A300 does not start after the installation of the anti-virus

  Hello

  I brought a Satellite A300 today and loaded it up and it was fine.
  I uninstalled the google toolbar, office and land it came preinstalled with also the mcafree anti virus.
  So I could install my own anti virus.

  After that the system asked me to restart my pc I did.
  Since then, the system cross the 'Please wait' screen
  But it won't let me boot into safe mode. I tried a system restore.

  Any ideas?

  Hello

  To me, it seems that you 3rd party antivirus software caused this strange and confusing problem the Vista OS installed.

  In my eyes a simply, new installation of operating system using the Toshiba Recovery disk would solve this problem.

  If you are able to start the operating system in safe mode and then try to remove your installed Antivirus software, then clean the registry and operating system using the free tool called CCLeaner and try to start the laptop again.

  Maybe it helps you too

• Windows could not start. request the installation disc

  Hi my laptop is coming with the "windows didn't start, insert the windows installation disk.

  Can anyone help? We don't have a Setup disk

  Hello

  Drive replacement hard is surprisingly simple and short on it's lower.

  Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Regarding the reinstallation of the operating system on the new HARD drive, there are two options - my personal preference would be the 2nd option wouldn't it because it does not any price.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• Satellite A200 could not start

  Hi all!

  I have this machine 2 years and for the last few days, he started not at startup... when I push the power button, you thought what it is working/loading because the data base in front of him light icon are active, but then the LCD screen is always black.

  Sometimes it started but it end/stop just in the TOSHIBA logo or before loading the windows xp loading screen and it stack up here.
  My model is SAT A200.

  Thanks for all your replies in advance...

  I found these threads that you have already posted here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=182235
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=179118

  Seems you have other, some additional questions with your laptop and after verification issue it the other threads, I came to the conclusion that there must be a serious hardware could be a graphics card / motherboard issue

  In my opinion, you will not be able to solve this problem without any extra help from a computer/computer technician portable
  Unfortunately, but I think you should get in touch with an ASP.

  Good luck

• Win operating system could not start because of the error in the software on the Satellite A85-S107?

  Windows did not start because of an error in the software. Please report this problem as:
  Load needed DLLs for kernel.
  Please contact your support person to report this problem. »

  A blue screen is suddenly pop up when I was surfing on a Web site, the warning above in black and white was shown after that I took the battery and restart windows.
  I thought it was just a simple step if I got the recovery disk, but I was wrong.

  The recovery procedure was very well finished 100%. But after pressing a button, the above kept warning appears, no matter how many times I had reinstalled by the recovery disc or (each time 100%) or by using the full version of Windows Xp.

  Nor he worked by the formatting of the HD I connected with a link IDE2USB for laptop XP of my friend, nor modify another HD.

  I excluded the problem with HD, so I guess maybe it's that the BIOS has been hacked (?) I downloaded the update of the BIOS to see if it works or not?
  but the result was disappointing. IT just stop at step 4 of the procedure of updating, it freezes just to flash initiating step.

  I want to remove the CMOS battery for a few seconds, but I'm not that pro and I could cause damage caused by improper handling.

  Could someone tell me what happens to my computer and how do I show this problem?

  Hello Wai

  If your device has trouble after that recovery image installation is probably hardware related issue. You can enter the settings of the BIOS as usual? If this isn't the case, I fear that the BIOS chip is damaged. It happen if BIOS update is interrupted shortly matter the reason may be.

  Removing the CMOS battery doesn t work like on desktps. Forget it!

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• ohasd could not start: ioctl inappropriate for device - standalone grid root.sh installation is not

  Hi all

  During the installation of grid software Oracle 11 g root.sh (11.2.0.4) 2 (standalone) OL6.3 failed with the below mentioned error.

  ===========Error============

  
  Assistant configuration database when a database is created
  Finished to turn the generic part of the root.sh script.
  Now root product-specific actions will be performed.
  2015-07-08 15:09:27: verification of superuser privileges
  2015-07-08 15:09:27: user has superuser privileges
  2015-07-08 15:09:27: analyzing the host name
  Using the configuration settings file:

  /U01/app/grid/product/11.2.0/grid/CRS/install/crsconfig_params
  Create the trace directory
  ADD LOCAL MODE
  Creating OCR keys for the user 'oracle', privgrp 'oinstall '...
  Successful operation.
  CRS-4664: node kchjovm42 pinned successfully.
  Adding to inittab demon
  CRS-4124: Oracle high availability Services startup failed.
  CRS-4000: Start command has failed, or completed with errors.
  ohasd could not start: Inappropriate ioctl for device
  ohasd could not start: Inappropriate ioctl for this device

  /U01/app/grid/product/11.2.0/grid/CRS/install/roothas.pl line 296.
  [grid root@kchjovm42] #.

  ===============================

  Given that the error has been corresponding exactly to Doc-ID 1607600.1 I tried to follow the steps mentioned but he couldn't go well, release pasted below,

  [root@kchjovm42 bin] # initctl reload configuration

  [root@kchjovm42 bin] # initctl start oracle-ohasd

  initctl: unknown employment: oracle-ohasd

  [root@kchjovm42 bin] # initctl list | grep oracle

  [root@kchjovm42 bin] #.

  While they inspected I found that initctl has no service oracle-ohasd that there are listed.

  Manual start of service has also failed,

  [root@kchjovm42 init] # initctl start oracle-ohasd

  initctl: unknown employment: oracle-ohasd

  [init root@kchjovm42] #.

  There are a lot of notes and documents available on the community & MOS but not get a voucher for my case. Grateful if you can help with this problem.

  Thank you

  Abhijit

  Refer to OHASD could not start: Inappropriate ioctl for device [1069182.1 ID]

  HTH

  -Pavan Kumar N

• Acrobat downloads and passes by the installation process but the stalls at the end sentence "the print spooler could not start" someone told all solutions?

  Acrobat downloads and seems to go through the installation process but the stalls at the end by saying that "the print spooler could not start".

  All this experience and give me advice?

  Hi johnt46100749,

  Please try the solution mentioned in this KB doc https://helpx.adobe.com/creative-suite/kb/error-1920-service-print-spooler.html .

  Kind regards

  Nicos