HP TouchSmart 4-1223tu Ul ENVY: restore data from backup

Dear all,

yesterday I was accidentally reset my laptop at the base. because I accidentally push the F11 key.

and I just klik next and next and next. When the recovery menu came, I choose recovery for this portable partition recovery (without flashdisk or external hard drive).

and now I get confused how to restore my data backup in the recovery partition in this laptop.

Please help me.

Thank you

Irma

@vaniarahma,

Hello and thanks for the display on the HP support forums.  After what you've done, you'll need to order the HP support recovery media.  Regarding your data, it is gone as soon as you start the process.  You want to keep all the data should be stored on an external drive.

Here is the link so that you reach your recovery media for your system.

HP computers - get HP recovery disks or HP USB recovery disc

Thanks again for posting and have a great day.

Tags: Notebooks

Similar Questions

  • Windows Vista. I can't restore data from backup after reinstalling windows.

    Regularly, I backed up my Dell laptop Vista hard disk independent. I just had to reinstall windows and now when I go to restore my data, I get a message saying the backup location is not available. I ran a backup on the same drive as before, but the problem remains. Even backup always lists all the backups I made before resettlement. How can I restore my data?

    Here's an article from someone who was essentially the same problem as you and finally resolved itself do the restore again (although some other suggestions can help more in your situation). http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/f9d74b19-5eec-4453-a3b4-ff11940ec83a.

    Frankly, at this point, I'm puzzled.   I don't know what else to try.  Maybe someone with more knowledge (a support technician or MVP) will read and respond to this topic.  I suggest you try this announcement in the Technet forums: http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/threads.  They are a little more technically oriented than here and may be able to find a solution to your problem.

    Good luck and I hope you get your problem resolved and can recover your lost .pst files. Lorien - a - MCSE/MCSA/network + / A +.

  • File to restore data without backup - how it works?

    Hello

    I have a 10.2 database runs on Linux without a recovery catalog archivelog mode.
    I created backup current controlfile.
    Then, I created tablespace 'data' and a table with a few lines inside.
    Then I deleted all the controlfiles and the data file from the tablespace 'data '.
    I did the restore and recovery:
    RMAN > restore controlfile from autobackupp
    RMAN > restore data from the tablespace.
    creating data fno = 6 name file = /...
    restore not made; all files readonly, offline, or already restored

    RMAN > restore database;
    (...)

    It's good, but I wonder how it works: I've restored a backup controlfile and does not know this controlfile tablespace 'data '. I have no current controlfiles (they were all lost), so there is no RMAN Repository.
    Can someone explain this to me?

    Thanks in advance,
    Sousou

    Sousou,

    There is a complete recovery (which means your controlfile is up-to-date, and you get so far) and incomplete recovery.

    If you do not issue
    until the logseq | Yvert | date
    Before you restore and recover
    RMAN will review the latest situation.
    In this situation, there is no data of tablespace, RMAN is unnecessary restore this tablespace.
    Restore the controlfile doesn't help here, such as structural changes in the database result in an automatic backup of the controlfile.
    You restore the most recent backup, so in this automatic backup tablespace has also disappeared.

    HTH
    -----
    Sybrand Bakker
    Senior Oracle DBA

  • Restore data from a CD after format hard drive. Backup and Restore Center.

    I had a virus problem in my system.  I was asked to back up the data before they formatted my hard drive.  I used the backup and restore - 33 CDs Center.  After picking up my computer (they have reinstalled the operating system - Vista), I was unable to restore my data.  When I try to restore it, I get this message "there are no backups available on this computer.

    Hi happythinker321,

    1. How did you create the backup?

    You will need to use the advanced restore feature and check if it works.

    1. open the Center to backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click backup and Restore Center.

    2. click on Advanced Restore Options. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on files from a backup made on a different computerand then follow the steps.

    Restore files from a backup

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

    Also check if the backup CD contains files whose extension is like. BKF

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BlackBerry smartphones cannot restore data from my phone

    Hello

    I had a problem with my phone and after trying several different things, I was told to back up my data and "wipe pocket."  I have everything backed up with BB Desktop Manager and after the handheld computer, the problem is resolved.  Unfortunately, now I can't get my data restored on my phone.  When I used the Desktop Manager, I clicked on restore and then came a box that says: "the data in the following databases...". Do you want to continue? ', followed by a list of my databases. Below that is a box for you to check that says «Clear the current memory of the OBU... and restore data...» ».  This sentence is overlying (you can see in the text) the Yes/No to click on the box.  So, even if I check the box in front of the text, I can't click on Yes or no. (nothing happens when I click on it). I tried to restart a few times Director of office, but I always get the same thing.  I finally uninstalled the Office Manager and re-installed, but I still get the same problem.  (I reinstalled it using a link that I got from one of these positions, not in the album I used for initial installation).  Any ideas?   I had the original problem was annoying, but it's even worse!  Thanks in advance...

    Never mind... figured it out... could not use the mouse to click on the 'yes', but when I used the TAB button and kept pressing it until it ended on the 'yes', I was able to hit the button enter and it worked.

  • HP TouchSmart 4-1223tu Ul ENVY: Bluetooth cannot send file

    Hey guys...

    Can you help me?

    My problem is that my bluetooth cannot send files to another device. but to receive the file.

    I tried to remove the device and re-team again, but another problem was to occur. I can't add devices.

    I also install the driver "intel bluetooth driver" but it has no effect.

    y does it can someone help me?

    Thank you so much yo

    Hi there @vaniarahma,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the problem that you are having with your bluetooth does not connect to other devices.

    What you're trying to connect to your laptop or your laptop connect to Bluetooth?

    Did you check the specifications of the other device to ensure that it is not a special provision (both feet far etc.)?

    I've found a few documents for you that can help.

    The first document that I found is called using Bluetooth (Windows 8) devices. This document can be useful because it will guide you through connecting devices.

    The second document, I found called understanding and troubleshooting Bluetooth wireless technology. This document has other useful information about drivers, ensuring that everything is bluetooth enabled, fixing the problems of bluetooth, etc.

    Please follow these troubleshooting steps, re-post and let me know how everything went.

    Have a great day!

  • You can restore data from previus windows?

    OK, that's my essue I reinstalled windows vista in my computer when I was doing this he told me that my old files which will be saved in a folder called "Old windows" when the installation is complete I have try to look fo this folder and I couldn't find it. So now I try to find out if I can restore my computer to a time before I did reinstalling windows? and if I can how?

    I never find these files again?

    Help, please.

    Thank you.

    Hello

    a clean install wipes the hard drive clean of everything

    You cannot undo what you've done

    If you have lost data, you can try this

    http://www.Piriform.com/Recuva

    Read also:

    Since we don't know exactly how you reinstalled it seek a windows.old folder

    How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

    http://support.Microsoft.com/kb/932912

    or even return to a previous operating system by using the information in file window.old at the link below

    http://support.Microsoft.com/kb/933168

    If the above does not apply we can not help you

    Try the data recovery experts

    but they are very expensive

  • my internal hard drive has not not detected., how do I restore data from it?

    Hello.

    while restarting my laptop, my system said that there is no disc startup in the system, I think that my HDD can't boot., I went to service center and they said they can't do nothing., can you say how to restore my hard drive?

    You will need to set the drive to another computer via a USB port to the HARD drive adapter and I hope that the reader is always accessible...

    The adapter looks like this...

    http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=3242517&SKU=YYT2-67846G

    Assuming that the readability, also need you permission to access files...

    How to hand...

    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

    When you run the zip file, it places a new item in the right click menu called 'Take Ownership'

    To use it, you highlight the file or the folder on which you want the property, right click and select take ownership.

    Then, a window will appear, and many data authorizations through pretty quickly. When permissions have been granted, the window will close and you will be able to easily access data in the file or the first selected folder...

  • How to restore data from sidecar?

    I accidentally deleted about 50 of my best photos from this year. Quickly, I realized my mistake and restored my recycling file and I then imported them. Now I can access but they do not have editing, keywords or attached information note. They are all. CR2 files. I think that this info is still in the file Backup from LR. How to restore these data? I don't want to have to re - edit all these photos.

    Windows 7

    LR 5.1

    Thank you

    Doug

    I'm sorry. In this case - course: just (select photos and) press Ctrl-S, or use metadata menu-> save metadata to file (s).

    ~ R.

  • Restoring files from backup

    I have Windows XP and the difficulty to restore the backup files. I tried using "Backup Restore Wizard. It will not access the file 'backup '. I'm trying to restore my system to an earlier date. It will only allow me to come back two days. I tried to use a manual date, which only works for the date it was entered. Ex: setting up printer - April 30, 2010. This was listed on May 2, and is the recognized system date.  Please notify. Thank you.

    You talk to the system restore?

    http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

    or the backup and Restore Wizard?

    http://www.theeldergeek.com/backup_using_wizard.htm

    TaurArian [MVP] 2005-2010 - Update Services

  • Windows Vista restore files from backup to external HDD

    I put the Vista backup center to do a weekly backup on an external hard drive.  However when I try to restore from it using the wizard it will not work.  Although he seems to know that the drive is there and shows even the dates of the back-ups, he did it, by clicking on them produces no result.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    I put the Vista backup center to do a weekly backup on an external hard drive.  However when I try to restore from it using the wizard it will not work.  Although he seems to know that the drive is there and shows even the dates of the back-ups, he did it, by clicking on them produces no result.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hey theplanisreal

    tutorials how to back up files and restore them

    see if that helps you

    http://www.vista4beginners.com/how-to-backup-your-data

    http://www.vista4beginners.com/how-to-restore-files

    Walter, the time zone traveller

  • How can I restore passwords from backup in the computer?

    Recently I have backup my computer factory quite a reset. When I restored it all he did not return the registered mozilla bookmarks or passwords. I was able to find and restore bookmarks but have not been able to restore passwords. I am looking for a solution to find and store, copy or print the list of passwords in the backup copy.

    Thank you

    You can only access the passwords stored in signons.sqlite if you have the correct signons3.txt file that stores the encryption key to decrypt the names and passwords.
    If copy the two files in the current Firefox profile folder does not work then you will have a file signons3.txt evil.

    Make sure that you have copied both files to the correct location with Firefox closed.

    You can use this button to go to the Firefox profile folder:

  • I transferred data from backup, but have not all the books that were on my Kindle App. How tdo I get back them?

    I upgraded to the iPad 2 Air after all iCloud backup data transfer that I found I was missing most of the books from my kindle app that were supposed to be in the cloud. How can I get the my new iPad?

    If they were purchased through the Kindle books (i.e. Amazon) you can open the Kindle application on your new iPad, if not already in the tap of the library the 3 bars on the high left and click library, and then tap cloud down, tap and hold any book in your library and then on download. All purchases are stored by Amazon and can be downloaded at any time.

  • Import data from backup 8.1 d progress

    Hello

    I want to import the Progress database in Oracle of the progress database backup file (BKF). Can you please offer any import tool.

    Sandy

    You cannot use direct - SQL Developer

    Supported Migration platforms

    You may be able to use the heterogeneous Services component

    http://docs.Oracle.com/database/121/HETER/GUID-97101994-163e-4A7A-ACDD-809BBD8C56FE.htm#HETER4017

  • All my data from Windows Live Mail swiped. Its the most important storage files.

    The contacts folder has remained intact, but a strange entry in the calendar (battle of the Boyne) suggests a pirate or a virus.

    The current data from Hotmail has been restored by simply reconnected to Hotmail.

    Have restored a backup of e-mail archive using Paragon Backup and Recovery app but have no idea where its restored to or how to move if I can find it.  A system restore point has also been successfully but without restoring data from Live Mail.

    What should do?  Any advice would be appreciated.

    Thank you.   Nick

    Hi nickslav,

    Please repost your question on the Windows Live Solution Center-Live Mail , where an expert in this field would be better suited to provide you with a solution. They might have other ideas :-)

Maybe you are looking for

  • When digital recorders are automatically deleted?

    Hi people, I have a strange behavior with data value references in LV OOP: I would like to equip a class with a reference to data value. When the first instance of this class is created, I create a new given reference value and a semaphore and put it

  • Eurotherm rs232

    Hello I would like to acquire the eurotherm temperature 2704 with a rs232 communication using a visa vi. Under MAX I have error 0xBFFF0072.* * the resource is valid but the VISA cannot currently access *. If someone has already used the ' eurotherm 2

  • How I change my ID of Windows live mail. Unable to send Email with Yahoo ID present

    For the last few months I spend hours ranging from help in support of sites etc sites, try to change my Windows live mail 2011 ID so I could e-mail. Somehow be an absolute genius, I entered an ID Yahoo active as my windows live mail ID. Whenever I'm

  • Get code error on bluescreen 0x0000008e

    Original title: what is presentation type MP I get this message associated with the error BSD.  I don't know what it is, or why it seems to happen automatically.  I don't find an entry in the services which seems to be associated.   In addition, anyo

  • Upgrade processor Pavillion G6-2001sw

    Hello I have a Hp Pavilion 2001sw with intel Pentium b960 g6. I know that I can go to i5 - 2450 m, but I'd rather have 4 cores and 4-wire to 2 cores only. It is possible to use the best processor in this model as i5 - 2450 m?