HP touchsmart laptop: laptop questions TouchSmart

Similar Questions

• 15 - r101na: laptop questions

  As far as I can see the 15-r101na HP and computers portable 15-r125na are exactly the same apart from the color. They are the same or I missed something?

  It is also possible to connect USB 2.0 devices USB 3.0 ports? Silly question maybe, but I have never owned a computer with a USB 3.0 port.

  Finally, the following HP printers work on Windows 8.1: Deskjet D1460 Deskjet D1660, Photosmart Plus B209a.

  Hi @james_233

  In response to your questions:

  I saw the pages of pilot for both models and they have the same list of drivers listed, but that is not unusual in a family of laptops, as often the same options are available. It is possible that the differences could be in hard disk or installed network card, amount of memory, etc., as well as the palette of colors, or even of the processor.

  I have attached the HP 15 Notebook PC HP 15 TouchSmart PC Compaq 15 Notebook PC Compaq 15 TouchSmart Notebook notebook PC - Maintenance and Service of Guide that applies to the whole family for laptop. Inside you can see the different options that are represented within the series.

  As for the USB 2.0 vs 3.0, it's a case by case thing. USB 3.0 is supposed to be backward compatible with previous versions, there are a few steps speed maximum transmission to associate the device attached, but in reality, some USB devices do not work with USB 3.0.  This also applies to most HP printers I have ever been. Usually, they will work on a USB 2 port, but more often now, people tend to connect wirelessly.

  All HP printers should work with windows 8.1. If the printer is a model more former for which a driver specific for windows 8.1 has not been created, then it is always possible to use a generic HP printer, such as the 9800 driver, or the driver 990 c, which is one of the options available in the operating system itself.

  I hope this helps.

• newbie Y560P laptop questions

  Lenovo forums are very informative and I looked for answers to my questions and have found some but not all. I recently (St Patty's day) ordered an ideapad y560P. I should have asked these questions before buying but there was an e-coupon deal that ends the day of St patty, I had wanted a laptop pretty advanced for a while so I jumped. Life is not perfect!

  1. a clean install of windows is possible with recovery disks that Lenovo provides? If this is not the case, what is the best way to do it?

  2. the Y560P can fully utilyze the new SATA 3 SSD as boot drive? Void the warranty?

  3. wait for Lenovo to ship my laptop until the Sandy Bridge sata port questions/reminder are developed?

  4. someone here successfully using imaging software (like Acronis true image} on their laptops?)

  Sorry for the newbie questions. I built my own desktops for years, but this will be my first laptop. Time passes! Thanks in advance for any help.

  Hey, I'll do my best to respond to these:

  (1) actually, no discs are technically provided by Lenovo. Your system comes with a separate, partition that contains a recovery image. That being said, you can create a set of recovery disks by running their usefulness (comes pre-installed). When you use these disks, it basically as a duplication process. So yes, you can do a clean install, if you think it their image pre-built a clean installation

  (2) not sure about the 3 SATA drives, but drives does not cancel your comprehensive guarantee. I would always keep the original drive where the system needs to be sent, but I think that the RAM and CPU are considered as 'evolutionary customer options' and are therefore not guarantee-killers.

  (3) from what I've read, Lenovo has already stopped the lines with questions of Sandy Bridge. None of these units should be delivery to consumers. If I remember correctly, it only affected some of the i7 lines. If you have concerns, you can always call Lenovo with your serial number, and they can check if the unit is affected. However, Lenovo has been very quick to fix this, I just couldn't see their shipping defective units known to customers.

  (4) Acronis and Ghost work quite well, assuming it is a standard drive. I could not find any problems with people using either a product on the readers of the so-called "hybrid".

  Hope that helps a bit!

• Need help to save space on the laptop; question related to enforcement of a Anthony

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Original title: download Odile

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Hello

  118MBs is a minimal amount of space on a hard drive and even if deleted will make no difference to your disk space issue.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Computer laptop questions - how to make a backup of the photo tags without saving with elements?

  I have 5 items installed on my laptop, but I have problems with video card.  It is by default the generic driver, and I can not launch the elements to make a proper backup of my files.  I get a message that it requires a screen of 1024 x 768 or greater than 256-color resolution, I can not do.  I can access my photos very well via Windows Explorer, but I would back up the tags as well (several tags on 6000 + photos) so I have to either find a way to start in low resolution, so I can do a normal backup with elements, or I need to find the files that store the tags, so I can move it to a new pc when I reinstall.  Any help would be greatly appreciated.

  That you think is NOT the right file.

  Now, you did say that you had already chosen a different name for your catalog - so I have concluded that you are using the default name. Therefore, my suspicion is that you have not set the Windows options to Show hidden files , or that you have not set the search options to include hidden files.

  You can make the setting for show hidden files from either Windows Explorer or the control panel screen. In Windows XP Windows Explorer, I think he was in the Tools menu select Folder Options and then choose the view tab scroll down to hidden files and folders and click the circle (button) next to show hidden files and folders.

  Then, since I gave you a full path to the folder, you can't really search you can simply expand the hierarchy of folders using Windows Explorer to find the folder

  C:\Documents and Settings\All Users\Application Data\Adobe\Catalogs

  Try this approach and then post back with your results.

• When you work from home I use a computer pc laptop co problem. -What adapters I need connect to Thunderbolt, or is that not possible?

  Not able to use my MBP when you work at home so I'm stuck with a co issue HP laptop - d - sub only for external monitor connection.

  Is there an adapter to allow me to connect to Thunderbolt display?

  I use a Samsung now works with my MBP (because it has a HDMI) and my laptop question k..

  Thank you pte

  If the computer is not a Thunderbolt port, you cannot use a Thunderbolt display.  There are no adapters, converters or cables that will help.

• My laptop is Latitude D630, lately its been freezing on me

  original title: laptop questions

  My laptop is Latitude D630, lately its been freezing on me and I don't know why I do not have what to do, I think it has something to do with memory, but I'm not sure can someone help?

  Hello

  Check with Dell Support, their drivers and documentation online and ask in the Dell forums for known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ==========

  Use the startup clean and other methods below to try to determine the cause of and eliminate problems.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Allocate more RAM for integrated graphics - HP Pavilion 15-n225nr TouchSmart laptop

  Hi, I have a HP Pavilion TouchSmart 15-n225nr Notebook PC, which is optimal for workloads but (A10 2.10 GHz AMD quad-core processor, came with 8 GB of ram and 750 GB HARD drive), however, recently tried to make a few games but this laptop has an intgrated GPU. I read that the upgrade of RAM will do not much but I ordered a second card of 8 GB of ram, because I want to increase the framerate by every single FPS I can ge and I'm coming soon, so I'll have 16 GB of RAM and the fact he'll be dual channel is a more. I have also read that by upgrading the RAM you can upgrade the amount of ram used by your integrated gpu because there will be more RAM available for use. I don't know if by upgradinng the RAM VRAM happen automatically or if I'll be able to do it manually, I read that you can do it via the BIOS, I don't know for shure if possible.

  So, is it possible to increase the fraction of my RAM than my integrated graphics card uses?, if yes, how?

  If it is not possible to what can do to increase my FPS on the game?, because I can't change a dedicated GPU because it's a laptop.

  Thanks in advance for any help.

  According to the specifications of your computer, to graph total 4195 MB memory is the maximum that can be used. Regardless of the amount of dedicated, is all that can be used as memory dedicated. As a general rule, Windows controls the amount of memory used by the video card. This means that you will not be able to change the settings in the BIOS that will change this option. This isn't a computer class in the game and you expect too much of him.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Add ram touchsmart 10 10-e010nr for laptop / PC

  How can I make my TOUCHSMART from HP Pavilion 10 10-e010nr computer run faster. I have 2 GB of ram, 320 GB hard drive. I can addmore ram.

  Hi @germfree,

  Welcome to the HP Forums!

  I understand you're wondering if you can add ram to your computer laptop 10-e010nr of HP Pavilion TOUCHSMART from 10. I am pleased to see that for you!

  I recommend you to go through this guide, the computer is slow (10 of Windows). To check the amount of memory currently installed and determines the amount of memory can be added, while your computer is turned on, follow one of the sets of steps below:

  In Windows 10:

  1. In Windows, find and open HP Support Assistant.

  2. HP Support Assistant, under Learn click on product information.

     Figure: Support Assistant

     

  3. See the section of system memory specifications for details on memory that is currently installed.

     Figure: The system memory information

     

  4. To find the total amount of memory that can be added, subtract the amount of memory currently in the computer of the maximum amount of memory that the computer can hold. To see the maximum memory the computer can take, see the finding information on memory for your computer model.

  5. For the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory locations of the motherboard. Usually, this is the maximum amount for each type of memory. For example, if the computer is able to contain a maximum of 4096 MB (4 GB) memory and the motherboard has four memory slots, install 1 GB (or less) per slot.

  Source: upgrade (RAM RAM).

  Also, you can take a look at this guide, Guide to Service and Maintenance.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope that answers your questions and have a nice day!

• Keyboards on HP Envy 15 Touchsmart laptop

  Hi, I was wondering, can you exchange the standard keyboard not backlit on this model and replace it with a backlit? I wanted to exchange it out if I could. Thanks in advance!

  Based on PC portable HP ENVY 15 and HP ENVY TouchSmart 15 Notebook PC - Maintenance and Service Guide for your laptop HP ENVY TouchSmart 15-j080us, it seems that it would be possible to replace the standard keyboard with a backlit keyboard.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Adding RAM to HP Touchsmart laptop 14-b109wm (REF E0X70UA)

  Hello!

  I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

  Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

  Thank you in advance.

  Rich

  RichFla wrote:

  Hello!

  I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

  Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

  Thank you in advance.

  Rich

  Hi RichFla

  It's your product user guide. Here is your product specifications.  It's your place of originprodut.

  You can upgrade up to 8 GB maximum. There are 2 slots available to customers & you can buy an identical plus 4 GB of RAM to upgrade both can act as configuration double track for better performance.

  Regarding the frequency of the RAM, the user guide gives no reliable information for Celeron processors. In order to better you find system through BIOS setup Diagnostics soon after off the laptop.

  See Page 66 Chapter 5 removal and replacement of the procedures of the user guide & you can see that, for installation of memory you need to remove the motherboard of the system. It's better to give you the nearest service center HP for the upgrade because they have all the necessary tools.

  Thank you

  Visruth

• TouchSmart HP ENVY 15-j004sa: using a Quad HD monitor with laptop

  Hello

  Can I use my computer laptop 15-j004sa TouchSmart from HP ENVY with a Quad HD (e.g. screen HP ENVY 32 inch Media) monitor and get the full resolution?

  Thank you

  Ian

  Hi @illusio ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your TouchSmart from HP ENVY 15 - j004sa Notebook and concerns with a Quad HD connection to the laptop monitor. Here is a link to page 7 of your manual for HDMI v1.4 support up to 1920 × 1080 @ 60 Hz.

  Hope that answers your concerns.

  Thank you.

• Windows 7 drivers for laptop Pavilion TouchSmart 15-n058ed

  Hi all

  I bought a laptop 15-n058ed Pavilion TouchSmart.

  By default, Windows 8 is (GER) installed, however, I don't want Windows 8, I want Windows 7.

  The support page lists only the drivers of Windows 8 (why?), so I started to look around, but can not get the correct drivers Windows 7 x 64 for (for example) the graphics card...

  Can someone help me?

  Thanks in advance,

  Martin

  Hello:

  I do not work for HP, so I can't answer your question about why they provide for W8 driver support on their new PC consumer.

  If you want to try to get an answer to this question, please contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  W7 x 64 drivers:

  First install the AMD chipset driver and restart. The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Now, your model seems to have a hard time to install that USB 3.0 drivers so if they install after you run just the file above, then please read this thread on the link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-HP-M6-k010dx-for-ACPI-HPQ6007-on-Windows-7/m-p/2891907#M145254

  First try my steps, and if they don't work, then try the steps posted by NAP_CHL_IT.

  There's another twist... If you have to go on the road to the manual installation, you may have to restart the laptop and repeat the process so that the drivers install completely.

  Then is the graphics:

  Run the tool to update AMD Mobility Radeon driver on the link below and it should find the correct driver for your model.

  http://support.AMD.com/en-us/download/mobile?OS=Windows 7-64

  Audio:

  Accept the agreement, download and install the second file listed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Then, for the rest of the drivers you need, you can get most of this model on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

  If, after the end of this process you still lack drivers go to Device Manager and click on devices that need drivers, post the hardware ID for them, and I'll try and find the right driver W7 for this device or devices.

  If you don't know where to find this information, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• HP Envy 15-j109TX Touchsmart computer laptop upgrade help

  Hello, my HP Touchsmart Envy 15 - j109TX laptop computer is shipped with 2 GB DDR3 NVIDIA GeForce GT M 740 graphics. Can I put graphics or higher cards of 4 GB DDR3 NVIDIA GeForce GT M 750 ?

  Also, I want to upgrade the RAM to 16 GB and a 2 TB HARD drive . Is this possible? I don't see any customization option in the HP Shopping Web site. So how can I do? also, thanks for mentioning about cost of upgrade of these.

  Hello
  
  Here are the specifications of product: http://support.hp.com/us-en/document/c04031367
  
  Go through the Page 4 and 5 of the user manual:
  http://h10032.www1.HP.com/CTG/manual/c04091768.PDF
  
  Upgrade options:
  Up to 1.5 TB drive HARD with no hybrid NAND support
  
  Up to 16GB 1600 MHz RAM with boost DDR3L dual channel
  
  Although Nvidia 750 M dedicated 4 GB card is indicate against the graphics options, I think not that this is possible because actually nvidia in this model is not as a card but more a chip which is attached to the motherboard. I think you need to contact HP in your area directly for this.
  
  It will be useful,
  Thank you