newbie Y560P laptop questions

Similar Questions

• 15 - r101na: laptop questions

  As far as I can see the 15-r101na HP and computers portable 15-r125na are exactly the same apart from the color. They are the same or I missed something?

  It is also possible to connect USB 2.0 devices USB 3.0 ports? Silly question maybe, but I have never owned a computer with a USB 3.0 port.

  Finally, the following HP printers work on Windows 8.1: Deskjet D1460 Deskjet D1660, Photosmart Plus B209a.

  Hi @james_233

  In response to your questions:

  I saw the pages of pilot for both models and they have the same list of drivers listed, but that is not unusual in a family of laptops, as often the same options are available. It is possible that the differences could be in hard disk or installed network card, amount of memory, etc., as well as the palette of colors, or even of the processor.

  I have attached the HP 15 Notebook PC HP 15 TouchSmart PC Compaq 15 Notebook PC Compaq 15 TouchSmart Notebook notebook PC - Maintenance and Service of Guide that applies to the whole family for laptop. Inside you can see the different options that are represented within the series.

  As for the USB 2.0 vs 3.0, it's a case by case thing. USB 3.0 is supposed to be backward compatible with previous versions, there are a few steps speed maximum transmission to associate the device attached, but in reality, some USB devices do not work with USB 3.0.  This also applies to most HP printers I have ever been. Usually, they will work on a USB 2 port, but more often now, people tend to connect wirelessly.

  All HP printers should work with windows 8.1. If the printer is a model more former for which a driver specific for windows 8.1 has not been created, then it is always possible to use a generic HP printer, such as the 9800 driver, or the driver 990 c, which is one of the options available in the operating system itself.

  I hope this helps.

• HP touchsmart laptop: laptop questions TouchSmart

  Hi, I bought this during the HP touchsmart Black Friday last year laptop and I was planning on upgrading, if possible, up to 8 GB of ram and the processor, this laptop may take such upgrade safely? and if so what is the best he can manage? Thank you

  Hi @Spartan2k15,

  Thank you for your response.

  Here is a link to HP 15 Notebook PC Maintenance and Service of Guide .  You will find all recommended spare parts listed and it contains a chapter on removal and replacement.  Here are some links that may help you gain coins.

  HP Partsurfer

  HP parts store

  You can also do a search on the web to locate parts with the references provided in the manual.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• newbie triggered custom question

  Hi gurus of Labview:

  It could be a very simple question for you guys, please provide some tips.

  Here's my scenario measure: I need monitor output of the sensor which is a signal voltage (to AI0), I just need to get the voltage reading when I get a trigger signal to axis to another (PFI0). I would like to save to a file .txt with the news. on the value of the voltage and the time stamp of each measure. With a simple while loop and the DAQ assistant, I can get the measure to start when a trigger is detected on the PFI0, however, the measure will now continue to operate after that. Instead, I want the system to measure a voltage value, then wait for the next trigger signal. I'm pretty new to labview, so it will be very appreciated if someone can point me in the right direction.

  Thank you very much.

  Shao

  OK, after reading this link given above about 1 sample (timed HW) I think that what you really want is continuous samples with the sample on your external clock clock.

  Apparently there is no buffer with the 1SHWT (I'm short hand here).  If you miss one, you get the overflow error.  That tells me your loop is medium to slow or your pendulum goes faster than you think.  By going with continuous samples, you will not have to worry about this.  You can simply take as much data as you want and save the heap in the file.  This will make things work a little easier.

• Newbie BB development question

  Hello eveyone. I hope this is the right place to post this question, but I'm looking for advice. I'm new to the development for BB, but since 3 days I did a lot of reading. The only problem with this is that the more I read more confused I get. I have developed solutions ASP.NET, but never anything like that for mobile devices.

  Here are my thoughts on what I would do:

  -Create a Web page for the BB, which goes to a SQL Server, accessing a view and extracts the data in a data Repeater or a gridview for viewing.

  I have an IIS server running locally and can be viewed on BlackBerry now. I've set up and you can check out. WML and. Pages HTML to it very well.

  My question is this. I read about this plug-in for Visual Studio 2008. I downloaded and installed successfully.

  I do not know the following:

  -Can I do what I would do without BES?

  -What would be the best way to go about this? A few suggestions on what would be the best way to approach this project.

  Any guidance would be greatly appreciated.

  Thanks in advance,

  Bob

  psu99 wrote:

  So I can just use Visual Studio.net 2008 and create a sample page. I use the PlugIn which can be downloaded or can I just without programming?

  From what you say, you just need Notepad, vim, emacs, any other to design a Web page. The fact that You ' l browse this page with a Blackberry or an iPhone or a Samsung is on top of that.

  psu99 wrote:

  And what you say to me that I didn't need BES... my point of view on what it was only used for PUSH applications.

  You use a BES is required if the Web server is not reachable from outside your corporate network. In this case, you need BES just for its web proxy that will allow your browser to reach a machine inside the LAN. BES can also be used for automatic authentication issues based on the PIN code of your device and/or X.509 private keys that can be installed by the IT company.

• Need help to save space on the laptop; question related to enforcement of a Anthony

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Original title: download Odile

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Hello

  118MBs is a minimal amount of space on a hard drive and even if deleted will make no difference to your disk space issue.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• CVP newbie on routing questions

  Hello, newbie here in CVP. Got a deployment with UCCE/CVP 9 X and Conn CUCM/Unit 9 X. No Sip Proxy and the current context we have to route calls to CUCM prior routing to ICM/CVP. I know that's not the best Setup, but there is no budget to spend more managers to call for UnityC to CIM at this stage so all calls will be pretty closely from before CUCM hit ICM. That said, I'm getting conflicting information about how to configure routing. Probably more too read things. From my tests, I need 2 PIMS on every PG to cover both CVP servers which means I need 2 labels VRU to account for each customer routing of the CVP (ie. 121212 and 131313)? I have heard however I need one but my call routing will fail if it is not 2. Is this correct? If this is the case, how ICM knows what CVP VRU label to use when a call is initiated of CUCM to ICM? And how is that redundant PVC without proxy SIP or DNS Srv? Any recommendations would be greatly appreciated.

  No, you build the same label for all customers of routing CVP.

  Sent by Cisco Support technique iPhone App

• BlackBerry Smartphones Newbie with 2 questions, need help.

  Hi guys,.

  hope you can help. I recently bought a BB Curve and think it's great.

  However the LED stopped working. I turned off the unit and removed the battery. When I put it in the LED lights up red, so it must work. I checked my profile settings and all say that the LED must be on. I have changed this setting to disabled, backed up, and then put it back on and saved and still no action led.

  The second question is attachments on my emails. I can't open attachments, photos, documents spreadsheets nothing. I use desktop re-Director. Is it possible to have attachments that are sent using this unit or any other bits of software? I have the only BB at work so I'm not so sure, establishment of a BB server is viable.

  Your opinion would be greatly appreciated.

  There is not all the configuration parameters for the Service of the attachment. The following table describes the supported types of attachments on a BlackBerry

  http://www.BlackBerry.com/BTSC/KB03265

  By default the LED flashes green to indicate that you are in a wireless coverage area. I found it annoying and disabled. Check the setting under Options | Screen/keyboard and turn the LED coverage indicator inactive.

• Newbie on MemoryStick question

  I am to evaluate vm workstation for our company and have no real experience with vm workstation.

  I'm hosting on windows 7. I created a machine virtual windows XP without any problem at all. Here is the question, when I'm on windows xp and I insert a USB / flash drive, virtual machine software allows me to connect to it and it displays in the status bar, but I can't see or access in the my computer window.  I really need to be able to copy files from the drive flash on windows xp machine... I read everything I could find, and it seems to me it should work... Sorry if this is a stupid question, but can someone tell me what I'm missing?  Thanks for your help!

  Welcome to the forums!  Do you have the VMware Tools installed in the virtual Windows XP machine?  You should be able to drag-and - drop between your Windows 7 host machine and the virtual machine.  You can disable the removable device (USB key) in the virtual machine to the host o/s.  You should then be able to open the drive, and then drag and drop the files / folders to your Windows XP VM.

  Please keep us informed.

  Good luck... Bruce

• Newbie on permission question

  Hello

  I have an operational 5.0.1 AMS. But I'm a newbie to AMS.

  I want to implement the authorization features for the AMS for streaming (vod) saved mp4 files.

  In a first time, for clients Flash using the RTMP protocol, subsequently for iOS/Android devices using HLS/HDS.

  My plan is that the client sends one identifier internal video to flow and a session id.

  These two parameters should be passed to AMS to another remote server with a PHP API or a SOAP web service. This remote server checks if the video might be listened to (Simplified) and returns true or false to the AMS.

  Now, my problem is that I have no idea where to connect to the communication between the client and the server.

  So far I got the normal way to proceed would be to listen to certain events in the main.asc.

  All the examples I found to date only show how to manage application.onConnect.

  But I would like the AMS to react on the command of NetStream.play (), sent by the Flash client.

  How is that possible?

  And, is it possible to do for HLS streaming that does not rely on Flash clients?

  Thank you very much in advance

  Hyper

  You pass additional arguments to the connect function:

  NC. Connect ("rtmp://myserver.com/test", "12345", "abcdefgh");

  On the media server, definition of the function onConnect to take as many arguments as you expect:

  application.onConnect = function (client, videoID, sessionID) {}

  your code to manage the client connection here, probably to check the values to the remote server

  }

  The customer is always present. You can add additional arguments after her.

  http://help.Adobe.com/en_US/flashmediaserver/ssaslr/WS5b3ccc516d4fbf351e63e3d11a11afc95e-7 edfSSASLR.html #WS5b3ccc516d4fbf351e63e3d11a11afc95e-7fe1SSASLR

  You need to pass arguments in the same order as the onConnect function.

• Computer laptop questions - how to make a backup of the photo tags without saving with elements?

  I have 5 items installed on my laptop, but I have problems with video card.  It is by default the generic driver, and I can not launch the elements to make a proper backup of my files.  I get a message that it requires a screen of 1024 x 768 or greater than 256-color resolution, I can not do.  I can access my photos very well via Windows Explorer, but I would back up the tags as well (several tags on 6000 + photos) so I have to either find a way to start in low resolution, so I can do a normal backup with elements, or I need to find the files that store the tags, so I can move it to a new pc when I reinstall.  Any help would be greatly appreciated.

  That you think is NOT the right file.

  Now, you did say that you had already chosen a different name for your catalog - so I have concluded that you are using the default name. Therefore, my suspicion is that you have not set the Windows options to Show hidden files , or that you have not set the search options to include hidden files.

  You can make the setting for show hidden files from either Windows Explorer or the control panel screen. In Windows XP Windows Explorer, I think he was in the Tools menu select Folder Options and then choose the view tab scroll down to hidden files and folders and click the circle (button) next to show hidden files and folders.

  Then, since I gave you a full path to the folder, you can't really search you can simply expand the hierarchy of folders using Windows Explorer to find the folder

  C:\Documents and Settings\All Users\Application Data\Adobe\Catalogs

  Try this approach and then post back with your results.

• Newbie on antenna question

  Hi, I got a 2 x 4402 WLC and 25 x 1242AG TOWER to deploy. None of the ROUND came with the antenna. They are to be deployed in an office environment. The absence of antenna would prevent me from editing above the suspended ceiling, or must they go on the inner walls instead? I could not do a poll on the site but as it is still a construction site.

  Hi Brian,.

  You know, I don't think that there is no 1242 with antennas :(

  «The Cisco Aironet 1240AG series Access Point is a fixed configuration access point, dual band IEEE 802.11a/b/g. built in to the access point are two radio stations, each with * dual diversity antenna connectors.»

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6521/product_data_sheet0900aecd8031c968.html

  You would need something like the series 1130 (with integrated antenna).

  http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html

  This does not mean you will need external antennas for use with the 1242.

  I hope this helps!

  Rob

• newbie JDeveloper Setup question

  Hey people.

  I'm a new ISV SE working to familiarize myself with things.

  Environment:

  Windows7 64 bit

  Java version "1.8.0_60".

  Tries to install:

  Installing Oracle JDeveloper Studio

  jdev_suite_121300_win64.exe

  When I run the installer, it dies on the market 'Prepare' with this message:

  java.io.IOException: C:\.oracleprinters\Middleware\Oracle_Home\inventory\Queries\jdkGeneralQueries\12.1.3.0.0\jdkGeneralQueries.jar (the system cannot find the path specified)

  My machine has a C:\.oracleprinters directory, but this subdirectory is not there.

  Advice would be useful?

  
  Carl

  Have you been asked to a Jdev installation folder in?

  You have another installation of Oracle on this pc?

  I never heard of puff, a folder named .oracleprinters, but it can be created by the installer itself. If it is empty, you can remove it and try again.

  Did you start the installer as an administrator?

  Timo

• Newbie on paths question

  Hi all

  Please take a look at the following picture:

  

  I am trying to trace an outline of a banner that oscillates around a cylinder. To do this, I created a path for the cylinder and the other for the banner. I had planned to merge with the pathfinder tool traces when I'm done and cut out the parts that overlap that I don't need. But here's my problem: when I created the closed path from the front of the banner and tried to add a single path (marked in green) I can't join them. This gives an advantage of ugly, overlapping (circled red). I read that it is not possible to reach a path open to a closed point anker. How could I solve this problem?

  All the tips are greatly appreciated.

  belfaser,

  You can select the entire document and in the Contour palette check the round cap and Round join.

  Making nice and consistent angles and ends (if you have Anchor Points correctly on top of each other, of course; The guides are your friends saying: anchor when you drag one to coincide with each other).

• Is it still possible... newbie link/photo question

  I know that I can link something to a whole picture. Is it at all possible to have few links located on different spots of a photo? Someone asks me to do it for our site, but I just can't understand it. I touched only in Dreamweaver and I don't know even where to look in the different help pages! If someone can point me in the right direction, it would be great. If it helps, here is the page that they want me to work this way... http://www.hartleynature.org/ecology/1918.html

  Click on your image, open your properties window, bottom left (I'm in CS3 so yours may be different), look for card.  Click the tool you want to use (oval rectangle or polygon) and bet on the section on the image that you want to link.  You should be able to go from there.

  Gary