HP w2338h monitor turns is not on!

Similar Questions

• monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

  I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

  Thank you.

  Hello

  Try to push the power cord firmly upward.  It should not move when it is completely inserted.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers.

  I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!

  Hello

  Troubleshooting with the monitor speakers sound problems

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01289551&LC=en&cc=us&DLC=en&product=3770742

  Also try to update the drivers of his last.

  I hope this helps.

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• Windows 7 double monitors - turn off a monitor causes Office to reorganize resulting in substantial losses of productivity.

  I have 2 monitors connected to a card nVidia FX 580 running Windows 7 Pro 64 bit. A monitor is linked via DVI and the other through DP (Display Port).

  If I turn off the monitor of the RFP, I hear the windows sound indicating the material has been "deleted." When I turn on the monitor, I hear the sound of new hardware, windows re - detects the monitor as if I just installed it and my layout any icon on the desktop and all the windows, I had open are then all rearranged and takes a long time, re-organization to come back to where I was.

  I leave my PC on 24 hours a day for several reasons - and for years have always just had my monitors turned off when you are not using it.

  I need to be able to turn off my monitors without windows deciding that I "removed" a monitor.

  I work for a software company of medical imaging, where we provide the complete hardware and software solutions for use in radiology departments in hospitals. These systems are usually 3 or 4 connected monitors, all via DP these days. Due to the possibility of the desktop users get messed up, if they happen to turn off a monitor, we can not install systems with Windows 7.

  While many may see this as nothing more then a disadvantage, it is a show-stopper as what we concerned. Yet as I have not found a viable solution to this problem.

  So here's the question: how to disable this new behavior in Windows 7 and allow him to understand that the monitor has not gone away and that the Office should not be changed simply because the monitor is off?

  Thank you.

  I wrote a small utility to fix this problem. It is still very thrown together, but Open source, so you can compile sources if you have security problems.

  I hope it works for you!

  http://www.ninjacrab.com/persistent-Windows/

• U2412M turns is not on

  Hi all

  After having some trouble connecting my Mac with the Displayport adapter to the monitor (it was not showing the image and was always on the power saving mode), I took off the power cable and when it is set again, he did not start. Tried several times now, change also the cable and nothing. No sign. Is there anything I can try? For example to reset it somehow?

  Thank you
  Jovan

  Jovan,

  * Turn off the computer and the monitor
  * Unplug all the cables from the bottom and sides of the monitor
  * In press and hold the monitor power button in during 10 seconds
  * Reconnect cable to the screen, then to the computer
  * Reconnect the monitor to the monitor power cord
  * Turn on the monitor, then the computer

• iPhoto open, black page, the wheel turns do not.

  iPhoto opens to the black page, icon wheel turns do not.

  with no details, we cannot help-

  What version of the operating system and iPhoto? What has changed since it worked?

  LN

• I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

  Take it to your local Apple store. They will find it for you.

• Tecra M5 - external monitor detected but not image

  Hello

  I just bought Tecra M5 for use with my external NEC monitor. However, regardless of the configuration, I try I get no image on the monitor. The LED on the monitor indicates that it receives the signal from the laptop but the monitor remains black pitch. The monitor works obviously very well, I just disconnected from another laptop.

  I tried all possible settings in the nVidia control panel, but without success. I also changed "Power On Display" in the BIOS "Screen LCD + Analog RGB" but no luck either.

  I have v.3.70 of BIOS and graphics card drivers v.7.15.

  Can anyone help?

  Thank you
  Mike

  PS When I press Fn + F5, I have no options to choose from, unlike the other FN +... combinations. I don't know that it should be everything, but it is perhaps worth mentioning.

  Also when I select only 'use a view' of the nVidia control panel and select my NEC monitor in the list, the monitor turns on and the light turns green, but the screen is still black. Like I can't accept changes the output switches to the computer screen after a few seconds.

  Hello

  I think you should test with the preinstalled Toshiba operating system.
  After that the laptop was recovered, connect the external monitor and use the FN + F5 in order to detect the external display.

• Disassembly of the w2338h monitor

  I need to disasseble a w2338h monitor. The pem nuts this is detached and fell inside the case. I used the instructions from HP web to work on servers and I am hoping there is a for the w2338h monitor...

  No one had no entry on my request, no matter, I was able to find a link to a Youtube video that I was shown how to remove the bezel: http://www.youtube.com/watch?v=A8XV4L0klO8 it's in Spanish but following what was going on in the video, I was able to open the monitor...

• My iPad turns off not even with hard reset. Suggestions?

  My iPad turns off not even with hard reset. Suggestions?

  Is your damage of Power Off button?

  If not, try

  Restore backup

  Restore like new

  http://support.Apple.com/en-us/HT201252

• monitor turns off for no apparent reason

  No matter what I do the monitor turns off

  Hello

  · What is the number and model of the monitor?

  · Have you defined a plan of the power on the computer?

  I suggest you to check the physical connection when the monitor turns off.

  In addition, update the drivers installed on the computer. You can check the link how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

  To update or change a device driver: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/devmgr_changing_drivers.mspx?mfr=true

• video monitor error is not compatible with this game - which can change in the settings on my netbook to run this game

  How can I change the settings to run a game on my netbook Windows xp... video monitor error is not compatible with this game.

  Hello

  Unfortunately, most netbooks do not have the resolution of the screen (or the graphics hardware) necessary to run graphics intensive games. Your best bet would be to run the game on a more powerful machine with a larger screen, or alternatively, as last resort try connecting an external monitor.

• I connected a VGA cable and clicked on the option monitor, he did not come on my t v

  VGA?

  I connected a VGA cable and clicked on the option monitor, he did not come on my t, v and the screen is black when I plug cable in the future. How can I get the possibility to save change?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

  Windows Vista-
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Windows Vista-
  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Windows Vista-
  From PC to TV, part 1
  Digital media stream to any room with Windows Media Center and Xbox 360
  http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-1-stream-digital-media-to-any-room-with-Windows-Media-Center-and-an-Xbox-360

• Could not turn off not disturb

  Hello
  I turned on do not disturb, restarted my phone and now I can not turn, do not disturb off the coast. I can change the volume through settings and the phone rings while Do not disturb is activated.
  The restriction is that I can't change the volume using volume keys or do not bother go far. Work volume keys, I tested with Diagnostics. When I press one of them, I see the icon of DND and a now key that does not work when they are hit. Here too, I can change the volumes of media and alarm, but not the volume of the ringtone is specific to DND.
  Restart the phone, or to go in safe mode does not help somehow.
  Please notify

  Okay, so I fixed it and it occurs once after that. The solution is to reboot the phone and press the volume key to turn the volume down until reach you vibrator, continue to press until a message appears next to the end key now, moment at which the button will finally work and finally turn off DND. The message goes something like this: 'until the DND's off... ' Nolramlb thanks for the tip by pressing the volume keys upward on several occasions, it obviously helped a lot.