My iPad turns off not even with hard reset. Suggestions?

Similar Questions

• Satellite A215-S4747 screen does turn off not moored with Dynadock.

  I am now running XP on my new laptop and I am VERY happy that I could find all the necessary drivers. A behavior while also happening is when Vista has been loaded, it is that I could not get the laptop screen turns off when it is docked. I have searched and read and followed the instructions to the letter. I'm not not a newbie lazy posting before search... it just doesn't happen as it should.

  If someone managed to solve this problem, please guide me to the promised land!

  The feature you are requesting cannot be provided by the Dynadock.
  It's a USB-dock worker with a generation of additional graphics card in and no docking solution.
  The only thing you can do is disable any action when you close the lid in power management, then close the laptop screen when it is docked with Dynadock.
  The display is off when you close the display cover.

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

  We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

  You can't do that. If you have a license for Windows, you can not use it on a Mac.

  In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

• my computer turns off not and the hibernation...

  my computer turns off not and the hibernation...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The above is kind of prerequisites and may solve the problem.

  ==========================================

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
  and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the WiFi network card power management,
  Modem and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• Home to the host windows group Group 8 Windows 7 not connecting not even with the help of the troubleshooter.

  I just got a win computer 8 and already have a Windows 7 computer, but for some reason any not connecting not even with the convenience of no help at all

  so if you can help solve me this problem please help. When I enter the password is says something like impossible connet to the home group.

  Hi Zpve,

  Let us know a few more things on the issue.

  1 to the computer on which you created the collective housing, Windows 7 or Windows 8?

  2. what version of Windows 7 do you have?

  3. what exactly is the problem you have?

  4. what happens when you try to connect to a home group?

  5. what error message do you get when you enter the password?

  I suggest you go through the links to find out how to create a group of home.

  For Windows 8:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-from-start-to-finish

  For Windows 7:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  You can go through the link and look for possible causes.

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Homegroup: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Get back to us with answers from the EPF.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• I am not able to turn off my laptop with the software

  Hello

  My laptop is flaky for some time but now it will not off without using the physical switch. I tried to reinstall Vista, but as you know, during installation Vista must be turn off and on several times to install.

  The first time Vista try to turn off, it crashes until I have to cut the physical switch so can never go beyond this stage.
  Anyone got any ideas?

  Thank you.

  Hello!

  You must give us a bit more information:
  -laptop model
  -Microsoft disk or Toshiba recovery DVD

  In your case, I would try the recovery disk.

  Maybe you can try another CD/DVD, for example Linux boot disk if you have the same problem.

  Good bye

• My iPad opens more, even with a reset...?

  Even if I reset my iPad with two buttons, only the Apple appears for 10 seconds it turns its back on black... She used to freeze, but he always returned after a reset.  Now, no more... iPad 2

  If the article of support cannot provide no signs of activity, you may need

  to be considered an authorized Apple service provider specialist.

  • If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

  • iPod lights - Apple Support

  Depending on your situation, it may or may not be an official Apple retail

  Store with genius; You can find a service Apple authorized service provider

  who has access to parts and expertise, that can test and repair.

  Independent repair places might be enough, when there is nothing else.

  However the items under warranty can be compromised in some cases.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • See all phone numbers around the world
  • Contact a mobile operator

  You may try to access or reset the iPad in conjunction with the computer.

  Several ideas and those repeated to occur with the use of the search engine; Word order and

  content to vary the results. Valid choices are not all, some may cause worse problems.

  https://DuckDuckGo.com/?q=ipod + towers + black + used + reset + restart& t = ffsb

  Another reset may involve completely re - as if you were to sell or give.

  Make sure you have a proper backup of the content elsewhere, always.

  • What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Good luck & happy computing!

• Turn off Auto Wifi with ICS

  Does anyone know how to disable the new feature automatic Wifi which has been shared with ICS? I think it's great that the phone can turn on Wifi when you are close to him, but it would be really nice if you could put to put only when near some Wifi networks or even turn off if this importance.

  Short wait the automatic menu Wifi to finally display and ask how you want to use it, does anyone know where in fact go into settings to do when you want and not when ICS decides to give you the pop up?

  It's frustrating because he doesn't stop himself when you leave a Wifi area and there is no apparent way to turn on only when you will be on your Wifi areas which makes this feature more a gene, then a real function.

  settings > wifi > menu button > advanced > disable the three heads-up boxes?

• Satellite P30 turn off - also problems with burning DVDs

  Hi Please help me.
  I had a row with my brother and it won't help.

  My Pc is only a year old and it turns off. I would say it was because of overheating, but he just did and it isn't really that hot.
  I put on the books, not on my knees, keep him away heat, crash back to the desktop.
  It makes me crazy, please, any help or advice or anything like that would be a great help.

  I also have problems with my dvd burner, always, he gets to about 17% and said that there is a mistake, thought it was the discs but surely it can be all 100 of them, I tried turning on and off but no use.
  Also the advice would be great!

  Please help a girl in need of a working Pc! Who does not know a lot of technical stuff!

  Hello

  Overheating problems usually occur because the cooling module cannot work properly.
  Fans are unable to work because of the dirt and dust inside the laptop.
  The best way to clear the fans is to use the vacuum cleaner.

  On the problems of DVD writer: well, it's not easy to say why it happens. Have you checked media dvd from different manufacturers? Many CD/DVD media works differently, and you should check it out.
  In addition, there is a problem with the burning software. I put t know what application you're using, but you should try to use Nero. It's very nice software and I m very happy. Check it out

• Could not turn off not disturb

  Hello
  I turned on do not disturb, restarted my phone and now I can not turn, do not disturb off the coast. I can change the volume through settings and the phone rings while Do not disturb is activated.
  The restriction is that I can't change the volume using volume keys or do not bother go far. Work volume keys, I tested with Diagnostics. When I press one of them, I see the icon of DND and a now key that does not work when they are hit. Here too, I can change the volumes of media and alarm, but not the volume of the ringtone is specific to DND.
  Restart the phone, or to go in safe mode does not help somehow.
  Please notify

  Okay, so I fixed it and it occurs once after that. The solution is to reboot the phone and press the volume key to turn the volume down until reach you vibrator, continue to press until a message appears next to the end key now, moment at which the button will finally work and finally turn off DND. The message goes something like this: 'until the DND's off... ' Nolramlb thanks for the tip by pressing the volume keys upward on several occasions, it obviously helped a lot.

• Computer doesn't turn off not except by a forced shutdown

  My computer shuts down only about half the time, or maybe less, and then I have to force a stop to the bottom by pressing the Start button on the computer.  I use IE 11 and Windows 7 and this problem started a month ago but I don't remember not something unusual is going on when it started.  Sometimes I let it just keep running and showing that he stops, and when I come back later to check it out, sometimes it is an icon in the task bar stating "Windows".  I can click on and close the icon & then it stops.  But it happened only about three times.  Usually he just keep running and showing it to stop until I have to force a stop down.

  Sometimes, when it starts all first, it flashes a message that a window is not closed and I have to click 'Cancel' and close the window.  But it's frozen so does not help by clicking Cancel.  I was always very careful to close all windows and usually turn off the computer at night.

  Of course, I'd appreciate any help with this problem.  wannierob

  Hello Wannierob,

  Thanks for the quick response.

  This scenario usually indicates a problem with the hardware. Alternatively, the driver can cause this problem. To identify the problem, check the following:

  
  1 overclocking: turn off overclocking to see if the problem occurs when the system is running at the correct speed.

  2. check the memory: check the memory using a memory controller. Check each memory chip is the same speed and that it is configured correctly in the system.

  3. power supply: make sure the power supply is enough power to properly manage installed devices. If you have added memory, installed a newer processor, installed additional disks or added to external devices, such devices may require more energy that the current power supply can provide constantly.

  4 overheating: check if the system is overheated by examining the internal temperature of the equipment.

  5. default values: use the default values of the system, and run the system.

  If you see that the computer generates a Stop error message that contains a BugcheckCode value that is not declared in an event ID 41, change the behavior of the computer restarts. To do this, follow these steps:

  1. right click on my computerand then click Properties.

  2. click on Advanced system settings.

  3. click on the Advanced tab.

  4. in the Startup and recovery section, click settings.

  5. Click to uncheck automatically restart .

  For more information, please refer to this.

  http://support.Microsoft.com/kb/2028504#method3

  Hope the helps of information provided. We know if the given steps helped.