HP web cam is not lsted in the Device Manager

Similar Questions

• computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

  tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

  Hello

  I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  After you have installed the camera, please check in the folder C:/Program files if it shows there.

  It may be useful

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• not listed in the Device Manager webcam...

  Hello..
  I have a Toshiba satellite A305 S6916
  Windows Vista SP2
  I've never used my webcam... then I went to use and found the Camera Assistant Software and when you click on it... He says that the webcam is disabled (well enough) or not found... so... I went to the Device Manager to see if she was there... There is no imaging device listed... no webcam at all... everything I tried failed and nothing seems to answer my problem... Help, please... No Chicony or whatever it is listed

  Hello

  Check in (Setup/BIOS/CMOS) settings as you start - usually F2 then attention screen - see if it
  is a switch off your camera.

  Go here and download the latest drivers for the camera for your model and version of Windows.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2205370&RPN=PSAGCU&modelFilter=A305-S6916&selCategory=3&selFamily=1073768663

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp Toshiba - Forums
  http://laptopforums.Toshiba.com/

  ------------------------------------------------------------------

  These are the usual methods to install the drivers for the device.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click drivers update (which cannot
  nothing that MS is far behind the certification of drivers). CLICK RIGHT on the camera.
  UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Just you'd go to Toshiba Support and get the driver for your model laptop.

  Go to your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Good time to get some other updates here.

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• What do you do if your cd/dvd drive does not exist in the Device Manager but always turns upward when you put a disc?

  HI, I lost my cd/dvd drive. It was there before, and when I had a successful previous problem to solve this but not this time. I did the upper and lower bit of regedit but without success. When I picked up this last time I learned to do something with the power reset but can't remember how now.
  I can't even get off the ground with the help of microsoft as cd/dvd players do not appear on my device manager.
  I use a portable Pavilion of HP9000 with a play version of Vista that is updated.
  Everything else works fine but just not drive.

  Hello

  I would like you to follow the steps below and check them off if they help.

  Step 1:

  I suggest to Uninstall third-party software for CD burning temporarily and check if the CD is recognized.

  Step 2:

  I would say that you go to Device Manager,

  a. click on 'View' and 'show hidden devices ',.
  b. once the device is found, click top and "search the hardware changes.

• BlackBerry smartphones does not connect to the Device Manager after upgrade [USB]

  Hello

  I've updated de.141.151 and just after the update has been made, whenever I try to connect my BB via USB, I get the message says:

  "Unrecognized USB device".
  The USB devices for computer mark attaached has malufunctioned and windows does not recognize it. "

  I tried cutting things:

  -Restart of BB

  -Restart the PC

  -Repair the current installation of Desktop Manager

  -Restore an older version of the Desktop Manager version

  PS: it is not unknown devices in the 'Device Manager' of the pc so there is nothing to uninstall and reinstall

  All are taken out with no results,

  any suggestions?

  Thank you.

  Found the solution, remove the battery after the closure of the DM, connect the usb cable and then replace the battery, the pc will read it.

• Realtek NIC does not show in the Device Manager - until a hardware scan is done

  A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

  Hello:

  I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

  On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

  They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

  If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

  Paul

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Satellite - 14G - L855 devices are not detected in the Device Manager

  I reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8). And there's a problem: many features is not found, like ethernet / wireless. Also found Radeon HD 7670 M video card. I can't install the drivers, the apears to errors that my hardware is not appropriate with the software (e.g., chipset). On the toshiba Web site, I typed the serial number of my satellite, but my computer is not found. What wrong with this laptop?

  Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]

  What should I do? I tried many drivers but no one works. Please, give me advice. Thank you.

  Toshiba Satellite L855 - 14G (Toshiba EUROPE GMBH)
  Part. N ° PSKFWE-00H00FG3
  Intel(r) 3210 M i5
  AMD Radeon HD M 7670
  4 GB RAM DDR3
  Windows 7 Ultimate 64 bit

  Hello

  I ve checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and all the Win7 64-bit drivers are available.
  Have you tried to install all the drivers, tools and utilities from there?

• Wmp54g driver installed, but not seen in the Device Manager

  I'm fighting with reinstalling my drivers of network for more than three days already. (For the history, see http://en.community.dell.com/forums/p/19269864/19470244.aspx#19470244)

  It seems that I finally got the drivers Intel work - however, the WMP54G I had installed before the (I hope) works now driver Intel is not listed in Device Manager. There is no icon in the taskbar wireless connections, either. Another attempt to reinstall the drivers, however, abandoned the process with the comment that drivers would be installed. So, I think the pilot is, but does not at all.

  So, how can I get rid of this driver and try to reinstall another?

  My spec:

  Dell Dimension 9200

  Windows Vista Ultimate x 64 (don't tell me there is no x 64 drivers, please!)

  Seems OK, as I said it.

  Really, it seems that standard LinkSys drivers on the download Web site support not at all x 64 systems. According to the readme files, the driver has not been updated since 2004! This is unacceptable, I think that - as a decent redirect in this forum does not work.

  Anyway, even if some really nice junior contributor on the forums seem to have written some x 64 drivers - himself, I actually did not know how to install without an .exe file. : Pei

  Instead, I did some more googling and learned that the WMP54G v4.1 and v4.0 chips were produced by RaLink and that these guys really provide decent drivers! It is at this point that I remembered my software "Unknown devices" mentioning RaLink, too, RT2500 for v4.0 and RT2561 to v4.1. And well, turns out I have a v4.1 and that their driver is working like a charm. They also provide WLAN monitoring software that allows some additional adjustments. My suggestion: Cisco should outsource their service driver development, too.

• Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

  Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.
  I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  Can anyone help?

  Do you mean the LAN card?
  What status of LAN card appears in Device Manager?

• Bluetooth do not appear in the Device Manager in my Lenovo G580

  Hello

  I bought a portable G580 with Core i7, 8 GB of RAM, 1 TB HDD, 2 GB of Nvidia 635 M and without windows.

  I installed it recently with a Windows 8 Pro 64-bit. All the drivers are working well except bluetooth, when I try to install his didn't tell, no appropriate driver must be installed. Also the bluetooth radio is not listed in Device Manager.

  Please, let me know, the solution I've read in several discussions, that the problem is still not resolved.

  
  

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.