HP ZBook 17: Cannot run the HP recovery
Hello
I'm trying to restore my ZBook to its original factory condition because it is very slow, whereas it runs on 32 GB of RAM, F11 does not work. After pressing the ESC key, F11 option is not listed (HP recovery Partition is present). I even tried to reactivate the Volume of HP recovery under disk management, but its greyed out. I think re - install a fresh Windows 7, but I can't find the key to series under the laptop. Is there another way to restore my laptop?
Product: F1J74UT, serial number: [personal information deleted], HP warranty end date: 25/02/2017
Thank you
Rommel
You can call the HP support and request a recovery media to boot up the laptop & reinstall back to the factory settings. >Contact HP
BTW, have you checked inside the compartment of the hard drive for the Windows key?
Tags: Notebooks
Similar Questions
-
I just new Acer Chromebook 14, but I am unable to make a recovery disk. When I run Chromebook Recovery Utility, it says 'invalid model number. Is there another way to prepare a recovery disk?
Thank you
Hi all
I just got word that it is available. On the application of recovery of Chrome, I am able to see that it is there.
Can you please try to access the recovery and let me know if you're still having problems?
Thank you
Cory -
Cannot run the recovery partition on Pavilion M7250n
Hello
My computer is infected with a virus and will not start and now when I try to run the system recovery by pressing F10, it tries to load the process of recovery and then gives me a blue screen of death KERNEL_DATA_INPAGE_ERROR error. Unfortunately, I did not create a recovery disk. I searched on the site of hp for recovery disk, but it is no more wear. Can someone help me with this problem.
Thank you
Hello
Try the following driver for "Away Mode"
FTP://ftp.HP.com/pub/softlib/Software7/COL16256/PV-43019-1/sp26714.exe
Kind regards
DP - K
-
My Windows Vista cannot run the restore of the system at startup, and it says press F11 to enter recovery mode and it dosen't work.
I can't use the CD/DVD from the CD/DVD because my dad broke it.
Can I do to solve this problem?Hello
Contact the computer manufacturer and ask them why F11 does not work to start recovery to factory settings...
Or other difficulty the CD / DVD Drive and ask the manufacturer of the computer of a set of to reinstallthe Operatying system recovery disks.
They do normally for a low cost
Any other tips we now give you another above, you should always a working CD / DVD player.
For this you need a DVD player:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Cannot run the Task Manager. I right click and select from the list, but nothing happens.
See: Why won't Task Manager, REGEDIT and MSCONFIG disappear when opening?
http://WindowsXP.MVPs.org/ToolsQuit.htm Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty. -
HelloI recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.I have the impression that sound when I run the 3D games, such as minecraft or GMOD.I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.It is not as if the graphics card is not there, so I'm really confused!Please help me, like playing games is my favorite thing. ;)CharlieI also ran minecraft to double check and I got this error code:Bad video card drivers!-----------------------Minecraft could not start because it did not find an accelerated OpenGL mode.Generally, this can be corrected by updating the video card drivers.-BEGIN 7fe0271 error REPORT-Generated 10/10/12 21:04-Minecraft Version: 1.3.2-Operating system: Windows Vista (x 86) version 6.0-Java Version: 1.7.0_07, Oracle Corporation-Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation-Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)-JVM Flags: 2 total; Xms512m-Xmx1024m-LWJGL: 2.4.2-OpenGL: ~ ERROR ~ NullPointerException: null-Is Modded: Probably not-Type: customer-Texture Pack: ~ ERROR ~ NullPointerException: null-Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]org.lwjgl.LWJGLException: Pixel format not acceleratedat org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)at org.lwjgl.opengl.Display.createWindow(Display.java:311)at org.lwjgl.opengl.Display.create(Display.java:856)at org.lwjgl.opengl.Display.create(Display.java:784)at org.lwjgl.opengl.Display.create(Display.java:765)at net.minecraft.client.Minecraft.a(SourceFile:233)at net.minecraft.client.Minecraft.run(SourceFile:516)at java.lang.Thread.run (unknown Source)-REPORT of ERROR END bb61788b-
Hello
After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.
See you soon.
-
Vista backup error: cannot run the RPC. (0x800706BE)
Hey there, I have a question about windows vista. I'm doing a backup of my system. In the end, I get an error saying: "cannot save settings to schedule automatic backup for the following reason: cannot run the CPP." (0x800706BE).
However, I don't want to schedule an automatic backup. I want to make a single backup. I tried to change this in windows Task Scheduler, but I can't because the WindowsBackup folder is not listed. Probably because there is no backups on demand. But I can't schedule backups since I get an error at the end. So the WindowsBackup folder does not appear and I can't change the settings. Someone knows how to fix this?
To be clear, I want to make one backup of my system.
When I go to services.msc and scroll down to the remote procedure call and watch 'Status' it says 'Started' or 'Released' (not sure since I have a Dutch version of Vista).
Also, windows backup is not calculating the number of necessary for the backup dvd.
Thanks in advance.
Bottom of GR
Hi Fazil,
Thanks for the help. But Vista gave me more problems, not just this one. A few days ago, I decided to upgrade to Windows 7. Problem solved.
Thanks again.
Bottom of GR
-
Original title: cannot run FixIt.
With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135
I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped. The following message appears: "toubleshooting cannot continue b/c an error has occurred." An error occurred during the download of one or more components and cannot run the troubleshooter. »These versions I've tried lately:microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Runmicrosoftfixit. Program.installuninstall.Runmicrosoftfixit. WinSecurity.fisc.8425861308153696.4.1.Runmicrosoftfixit. Wu.FISC.8425861308153696.4.2.run852581157233326805.5.1.runI don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353). I tried to install this download since January of 2012. The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update. I remember somewhere along the way, getting the error message that some files were corrupt. Your help would be greatly appreciated.Hello
Are able to run fix it?
You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:
-
Hello, my pc is very slow, and then restored the system.
And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:Cannot run the file: iexplore.exe
ShellExecuteEx failed; code 2.
The system cannot find the specified file.I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.
Or find me in my computer the "iexplorer.exe".
A friend told me that there is an error in the "System32" folder But I haven't changed it.
What is this error? Can I format the computer?
PS: I do not speak or write English very well. Sorry for mistakes in the text.
Click Start, type: enable or disable windows features
Press enter
Uncheck Internet Explorer
Click OK
Restart if prompted.
Click Start, type: enable or disable windows features
Press enter
Uncheck Internet Explorer
Click OK
Restart if prompted.
Check to see if you can launch Internet Explorer
If the problem persists:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Cannot run the file: D:\Call-Of-Duty-Black-op2-II/redist/vcredist_*86.exe CreateProcess failed; code 740. The requested operation requires a rise. It is a game is call of duty black ops 2Please help me if you can, I want to play this game, please help me, are any developer here?Original title: cannot run the file: D:\Call-Of-Duty-Black-op2-II CreateProcess failed; code 740. The requested operation requires a rise. It is a game is Tanya call black ops 2
Hello
Welcome to the Microsoft community. I've surely you will help find a solution on the issue of game Call of duty .
1 have you connected as administrator to start the game?
2. were you able to install the game successfully?
3. What is the brand and model of the computer?
4. have you already compare the minimum requirements for the game runs correctly on the computer?
Method 1:
What are the minimum requirements for the call of duty to work. Compare specifications with your computer.
Operating system: Windows Vista (Service Pack 2) or Windows 7
CPU: Intel Core 2 Duo E8200 2.66 GHz or AMD Phenom X 3 8750 2.4 GHz
Memory: 2 GB for 32-bit operating system or 4 GB for the 64-bit operating system
Hard disk space: 16 GB
Graphics hardware: NVIDIA GeForce 8800GT 512 MB or ATI Radeon HD 3870 512 MB
Method 2:
I suggest to refer to this article and run the game in check with the question administrator mode.
How to apply once with a full administrator access token?
Hope this information helps. Please reply back with the State so that we can help you.
-
ASP - function Remote - error: cannot run the trigger
Hello
I tried to get my macros being run by a remote server.
It's my function file remote named "remote_test_pc.asp":
framework integrated; then
conf t
interface $INTERFACE
Description macro $TRIGGER
PC-VoIP-Port Description
switchport access vlan $ACCESS_VLAN
switchport mode access
switchport vlan voice $VOICE_VLAN
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
no event log status link
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no link-status of snmp trap
spanning tree portfast
spanning tree enable bpduguard
service-policy input PO_TRUST-PHONE
output
end
FI
framework integrated; then
conf t
interface $INTERFACE
No description of macro
Description by DEFAULT-CONFIG
switchport mode access
switchport access vlan 999
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
spanning tree portfast
No switchport voice vlan $VOICE_VLAN
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no service-policy input PO_TRUST-PHONE
FI
output
end
FI
And this is my config on the switch to mac-group and the macro:
!
macro auto Test group address-mac-PC
Mac 0019.9990.5509 address list
!
comprehensive treatment of the auto macro
macro auto control global detection mac address
!
automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127
!
When I plug this workstation for the following syslog messages:
Switch #.
Remote_test_pc.asp loading!
[OK - 1702/4096 bytes]
Enter configuration commands, one per line. End with CNTL/Z.
Switch con0 is now available
Press RETURN to get started.
Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function
26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console
26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message
Switch #.
The port works as it should, but I wonder about the error message.
The switch is 2960 with IOS 12.2 (58) SE2.
Can someone explain what this means?
Thank you very much!
Sven
Hi Sven,
I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.
Thank you
Ankur-
-
Hi all
I have a data file where there is a wcm:element like below
< wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>
So, I get an exception to content server
Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.
intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2271)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)
at intradoc.server.Service.createServiceException(Service.java:2260)
at intradoc.server.Service.buildResponsePage(Service.java:1314)
at intradoc.server.Service.doResponse(Service.java:2076)
at intradoc.server.FileService.doResponse(FileService.java:1469)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl
at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)
at intradoc.server.Service.buildResponsePage(Service.java:1267)
... more than 10
Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx
* ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $
! csDynHTMLNoStack! $
!csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$
-& #62; & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;
in sitestudio. SSClassHelper.invoke (unknown Source)
in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)
in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)
in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
... more than 17
Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError
at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)
at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)
at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)
at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)
at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
in sitestudio. SSClassHelper.invokeRaw (unknown Source)
... 23 more
Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.
* ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $
! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$
! csDynHTMLServerScriptEvalError
in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.
Concerning
I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).
At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).
If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?
Jonathan
-
FRM-41214: cannot run the report during the call to the reports
Hi all,
I work with Forms 10g on Windows 7 (local working with OC4j), I have a form with a button calling a report, it's the code for the button:
declare
Repid REPORT_OBJECT;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (20);
BEGIN
Rep: = find_report_object ('EMPS_BY_DEPTS');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repetat');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'paramform = no');
v_rep: = RUN_REPORT_OBJECT (repid);
rep_status: = REPORT_OBJECT_STATUS (v_rep);
While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
LOOP
rep_status: = report_object_status (v_rep);
END LOOP;
IF rep_status = "FINISHED" THEN
WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repetat","_blank"); "
ON THE OTHER
message ("error when running report");
END IF;
END;
I create a report object in the browser of the object with the name ""EMPS_BY_DEPTS "with properties " filename = emps_by_depts.rdf.
I also have a server with the command server = repetat wserver report
When I press the button to call the report I get this famous 41214 FRM: cannot run the report.
I tried running the report with rwservlet: http://acer-pc:8889/reports/rwservlet?report=emps_by_depts.rdf & userid=hr/hr@orcl & desformat = pdf & destype = hide & expiry =...
and it works very well.
Any idea and thank you
I do in this case,
1 - i run report with parameterform = YES (Note: your report is not a form of parameter), so I can see explanation real error report.
2 - showjobs of report server options
We use the 11g r2, for 11g r2 reports this link http://
: 9002/reports/rwservlet/showjobs? = RptSvr_ , so I can't see error detail._asinst_1 server10g should be that this option absolutely. but I don't know.
These can help you.
Best regards.
-
Cannot run the script line of 3712
CFFO todo o principle pra instalar o ft_Toolbar 2, very ao open o after ele cylindrical o erro cannot run the script online 3712. undefined is not and the object. O that pode ser?
You should find the forum for any product it is and post your questions there.
Here is a link to a page that provides links to all of the Adobe forums...
The Forum links page: https://forums.adobe.com/welcome
-
DB and dev 10grel2, xp sp2
Hi all
IAM trying to run the report in the form with a button generator
I used this command to start my server: Server rwserver = "MyServer" auto = Yes and it works well.
I created a report object (report5) on the form that contains the button to run the report.
When I click on the browser reports node to create the report object, I assigned 'myrep' as the file name of the report, not based on a block of data and then created the report of the scott schema dnames.
then closed the Report Builder without saving it in another format.
then I wrote this code in the when button pressed the shutter:
-nothing wrong with the code, then I ran the form, you press the button to find out:declare rp report_object ; v varchar2(90) ; begin rp := find_report_object('report5') ; v := run_report_object(rp) ; end ;
FRM-41214 cannot run the report.
When I looked at the online help, it tells me nothing but
Cause: The report server could not run the specified report.
Action: Check the report server and make sure it is running.
and I checked and it runs and upward.
What should I do?
Thanks in advanceCheck my code and try this code in you touch. I write it given your situation and information provided. You can paste directly into your trigger button.
DECLARE v_repid REPORT_OBJECT; v_rep VARCHAR2(100); v_rep_status VARCHAR2(100); v_param VARCHAR2(200) := NULL; v_valor VARCHAR2(200); v_url VARCHAR2(2000); v_repserver varchar2(20) := 'myserver'; -- YOUR REPORT SERVER NAME v_report varchar2(100) := 'E:\myrep.jsp'; -- YOUR REPORT PATH AND NAME /* IF .JSP IS NOT WORK CONVERT IT TO .REP AND TRY */ v_PARAMETRO varchar2(100) := ''; BEGIN v_repid := FIND_REPORT_OBJECT('report5'); -- report is an element from object navigator report SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_FILENAME, v_report); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, cache); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'pdf' ); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESNAME, v_report); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, v_repserver); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_OTHER, 'paramform=no '||v_PARAMETRO); v_rep := RUN_REPORT_OBJECT(v_repid); v_rep_status := REPORT_OBJECT_STATUS(v_rep); WHILE v_rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP v_rep_status := REPORT_OBJECT_STATUS(v_rep); END LOOP; IF v_rep_status = 'FINISHED' THEN message(v_rep); message(v_rep); WEB.SHOW_DOCUMENT(v_url||'/reports/rwservlet/getjobid'|| SUBSTR(v_rep, INSTR(v_rep,'_', -1)+1)||'?'||'server='||v_repserver, '_blank'); END IF; END;
So let me know what you get...
Ed: I've updated my blog link. You can check the first time, if necessary.
Published by: HamidHelal on January 21, 2013 12:43 AM
Maybe you are looking for
-
WinXP Pro think my IDE/ATAPI Zip 100 Drive is a SCSI device and does not read disks.
Zip Drive 100 a () works fine in my old computer with Windows XP and my new computer P4 (Core 2 Duo) the analysis of the Bios boot correctly sees as an IDE/ATAPI drive, but the Device Manager Windows XP Pro says it's a SCSI device. Tried several zip
-
Problem of theme/windows live messenger
Hello, I am currently using Windows Vista. I tried to install a theme windows 7, but when I do my windows live Messenger is NOT will work. I opened, click on sign in and sign it then indicates a problem with windows live messenger, please wait wile,
-
BlackBerry Smartphones where is the character for SMS on Bold 9900 counter?
I don't seem to be able to find any counter of characters when you type an SMS on the Bold 9900? This seems an obvious feature, so I suppose it must be activated somewhere, but cannot find where. Can anyone help? Thanks Simon
-
We have an ASA 5510 at the remote office. There is no network administrator at this place. The network administrator of connections of office from the hand to the Cisco VPN client to do Administration on the SAA. What IP address you EF in the mana
-
Equivalent of the mouse above the surface
original title: equivalent of the mouse on When using of surface, how the mouse action? When I touch it, it just snaps. is there a gesture that simulates mouse and not click.