Phone cord 4632 Officejet printer

Similar Questions

• OfficeJet Pro 8610 - error setting up Fax Wizard I don't use a proper phone cord

  I have a single line by Time Warner Cable telephone system that is a set which includes the cable TV, internet connection of road runner and digital phone. I use a system of wireless phone with a stand-alone answering machine which works very well.

  I'll just put up my new printer Officejet Pro 8610 and crossed the Fax Setup Wizard to use my voice single line telephone and fax system just as I did with my old HP Multifunction printer it replaces.

  Everything seemed to connect and to work very well when one had the Fax Wizard to perform the test at the end of the installation procedure. As a precaution, I ran the consecutive times to test with the answering machine turned on and turned off and twice he spent in all categories, and once it failed to indicate that the phone cord was not the right kind.

  I used the RJ11 cable supplied with the printer, but it wasn't enough long reach the phone in the wall jack that I connected an additional RJ11 cord so it would reach. So the two cords to have only 2 pods as they should.

  I am trying to determine why I get together and pass and fails with the same set up?  If I need one RJ11 telephone plug cord in the wall to the printer?  Or am I running a subsequent wizard test too soon after a previous?

  I would appreciate any comments or suggestions about the reason that I feel this inconsistency.

  Thank you

  Hi coollx,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8610 is indicating that you are using the wrong phone cord. I'm happy to help you with this problem of Fax!

  It is possible that what you need is a cord of unique phone from the telephone jack in the wall to the printer.

  I recommend to read these faxes guides:

  • How to connect your fax HP to a line ISDN, ADSL, PBX or VoIP device.
  • Can't send or receive faxes.

  I hope this information helps and thank you for posting!

• Error "you do not use the Type of appropriate phone cord.

  Having a problem with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it received a transmission error.  I run fax test and she came back with "you do not use the type of appropriate phone cord.  Nothing has changed since I last fax would be but I check the lines and connections, everything seems ok.  Phone jack is connected to 1 line and Officejet 2 - ext"is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call and receive calls on the phone to connect to the Officejet.  My hypothesis is that because I can use the phone without problem there nothing wrong with the phone line.  Any ideas?

  I had the same problem.  I am using a phone cord 2-wire supplied with the printer and still get this error.  It turns out that it is bound to have a telephone connected to the printer.  If I unplug the telephone shape of the intake extension on the back of the printer, then the fax test passes.   I used even a cord 2-wire on the telephone, but it seems that the mere fact of having a phone plugged into the outlet of expansion will cause this error.

  Run the test without a phone plugged into the outlet of extension of the printer and you should be fine.

  Worked for me!

• OfficeJet 4632: officejet 4632

  This printer print on cardstock?

  Hi @Faye24,

  Welcome to the HP Forums!

  I noticed that you wonder if the printer HP Officejet 4632, can print on cardstock. I'm happy to answer that question for you!

  Yes, this printer can print on cardstock. But only certain types, sizes and weight of cardstock. According to the specifications of the printer, it states:

  Paper type - maps
  Paper - 200 g/m2 weight (110 lb index max)

  Paper tray (maximum capacity) - up to 20
  Output tray *-10

  Sizes of cardstock and supported types are:

  Index - 76.2 x 127 mm (3 x 5 in)

  Index - 101.6 x 152 mm (4 x 6)

  Index - 127 x 203.2 mm (5 x 8 in)

  Japanese postcard - 100.1 x 148.1 mm (3,94 x 5.83 in)

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope that answers your question and have a nice day!

• OfficeJet 4632: Officejet 4632 installation Via the network

  Hello

  I bought a 4632 Officejet (which AFAIK is the same as the 4630) at ALDI in Germany, and when I tried to set up for printing from a Windows 7 PC on the same network, Windows found "two": printers

  -"HPAA6648 (HP Officejet 4630 series)' at the address http://192.168.xx.xx:3911 / (beginning with"http://"and with annex 3911 port)

  -"Officejet 4630 series (HP)' at the address of 192.168.xx.xx (without"http://"and specific port)

  What is the difference, and that should be used?

  The only difference I see is that to access the 192.168.xx.xx since the browser gives me the web configuration page, while http://192.168.xx.xx:3911 / gives me a useless XML page.

  Impression regarding both seem to print as well, using the same drivers.

  Hi @PietKram,

  I understand that you see 2 printer and can print both of them all the same, but want to know that you should be selection.

  I suggest using the 192.168.xx.xx (without "http://" and specific port). The reason is that it allows an open line of communication rather than restrict communication to the printer to a port. If you choose the one with the port, it might well work, that you have described, it is, but it can only be short term. If this port is blocked, you will probably be able to print.

• Photosmart 7525 Setup error: phone cord is connected to the wrong port, but is not

  I posted this to the Commission of scan/fax, but received no response.  I apologize if the permutation is against the rules.

  A post scriptum, is that the computer I used first the printer has Windows 8.

  I am installing a new HP Photosmart 7525e and tries to set up faxing.  I first used the existing phone cord connected to the wall jack that I had had my previous printer.  During Fax Setup Wizard, I get the error:

  Hi, sorry to hear the drawback on your printer printer e-all-in-one HP Photosmart 7525.  I am pleased that your unit is able to send and receive faxes.

  False failures occur, particularly in an environment of fax over IP, or when a device downstream such as a telephone or an answering machine is connected to the 2 - EXT printer port.

• hp6500a fax needs special phone cord

  What is special about the phone cord it comes with the HP6500a?  I lost me and now I can not use the fax feature.

  Find out what...

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00014834 & lang = to & CC = US & TaskID = 101 & ContentType = SupportFAQ & prodSeriesId = 3645081 & prodTypeId = 18972

• can't get fax to work on 8500 a... using type of phone cord appropriate with fax error...

  has tried all possible configurations... 2 new cables and still nothing... past the fax hardware test, test socket connection wall, telephone connected to the appropriate port on the tests fax then fails with the help of correct type of phone cord test... any help would be much appreciated as I only want to use all the rest not disturbed fax function even if everything else works fine.

  What type of telephone service you have? Analog or digital?

  Also make sure that your phone cord has only two wires.

  Discover this document especially if you have phone service VoIP / DSL.

  Thank you!

• Require an HP officejet printer

  I want to buy a HP Officejet printer for my shop (Commercial use) that can be loaded with kit ciss (Continuous Ink Supply system) so what are the models of hp officejet and officejet pro that I can use?

  Also let me know that some hp officejet printers have the print head and some don't? Do this ciss affect printhead kit?

  Thanks in advance

  Hello

  HP makes no printers for CISS systems. HP recommends the use of original HP ink to ensure the best quality for your printing to print. Of course you can choose according to your printing experience, but the reliability and longevity of your printing experience may not be as good as using original HP ink cartridges.

  http://support.HP.com/us-en/document/c00853819

• How to adjust the margins of the page on the officejet printer 6700

  How you set the margins of the page on a premium of 6700 Officejet printer all-in-one. I just bought and set up.

  Configuration and installation went well and everything seems to work. I looked in the software development and have not yet

  to find something on the definition of the page margins. The question arose when I printed an email as well as the right doesn't have the edge of it

  print.

  If I understand this has much to do with the original message and the format (an example here of users with similar issues). It seems html in messages can cause this and things like scaling to fit are unable to help. Are you able to export email and open in word or a similar program for printing?

• officejey4632: how to make letters with the numbers on the keyboard of my officejet printer 4632

  need to put in the letter and numbers then how can I go from one to the other?

  Hey @septb5,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand you are trying to change from letters to numbers on your Officejet 4632 e-all-in-one printer. I can help you with that.

  When you press a key on the keyboard repeatedly, he spends the lowercase, uppercase, then the numbers. So, for example, if you press the 5 button eight times the highlighted key will go j-k-l-J-K-L-5-j. If you the five necessary then press the button seven times. If you press these keys too slowly then the printer stops at the last key that has been highlighted. You can use the left arrow to the left of the screen to go backward one space.

  Please let me know if you have any other questions. If not, have a great new year!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• How can I print from my phone smart hp officejet 8600 window 7 64-bit

  How can I print on my printer to my Android phone

  You can do this in two ways:
  ePrint printer (set up an email from the printer and send a document to the Android)
  * Use the HP ePrint home & Biz app that allows you to print directly to the printer of the Android

  In both cases, the officejet 8600 should be connected to your network wirelessly or through ethernet. To start using home & Biz it android should be connected to the same wireless network that the printer is working correctly.

  I hope this helps.

• OfficeJet 4632: The printer does not print

  When trying to print a pdf document get a sceen that says "ePrint, search for the wireless network and eprint printers.

  My printer says device managers works.

  Hey @don85,

  Welcome to the Forum from HP Support.

  I understand that you are unable to print from PC. I would like to help.

  Are you connected to a wireless network or are you connected to your PC via USB? If you use wireless, have you checked that the connection is intact? Press the wireless icon () - t - it show an IP address? If you are not connected, run the Wireless Setup Wizard to remedy. Subsequently, I suggest you click here to start printing HP and doctor Scan. This utility is very handy when setting basic printer installation issues.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• 4632 HP Officejet printer: hp officejet 4632 printer stuck printing alignment page

  Help please.  My printer is stuck trying to print an alignment page.  I can't scan or copy anything to the printer.  I tried unplugging the printer with power, has waited more than a minute, reconnected and it did not help.

  I tried the scan doctor and she also did not help - Alternatively found printer was 'busy', or scan doctor tried to print an alignment first page and is stuck there. If I "jump" impression of the alighment with doctor to scan page, it prints a test page, it finds everything works "ok." "" "." Print alignment page"bypasses to jump the"print alignment page"printing, and yet the screen of the printer still says 'now printing alignment page', is stuck and I can't always copy or scan anything from the printer.

  I would greatly appreciate any suggestions I tried to solve this problem for several weeks.  Thank you.

  I think I've just fixed this problem after 3 weeks.  I actually tried the doctor print because it seemed to be a printing problem.  I just tried the scan doctor, he finds problems, led me through steps and printing and scanning seem to work now.  Phew!  That took much too long to fix, but glad it works again.

• HP Officejet Pro K550: HP Officejet printing only in yellow

  Despite the change of all cartridges in my HP Officejet Pro 550 k, I can't get the printer to print in uneven yellow?  I have reset the printheads several times and it has not solved the problem

  Does anyone have any suggestions

  Welcome to the @karandy forums

  I read about the issues you are having with your Officejet K550 printer because it is only print Yellow ink in clumps. As you have already changed the ink, I wouldn't recommend this even once and unfortunately looks like an internal malfunction. However, please always try the rest of the troubleshooting steps in the guide that I found for you below.

  If the problem persists, call HP directly to discuss your printer options.

  Missing colors in printing

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy Thursday!