HP6500A more prints the Directory page?

Similar Questions

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• HP Photosmart C6380 does not print the entire page

  My HP Photosmart C6380 will not print whole pages.  Some lines close to the end of the page are not printed.  From time to time, it prints the whole page.

  Hi mercierm,

  Welcome to the HP forums!

  I see that you are working with a Photosmart C6380 and sometimes it seems not to print the whole page and other times he does it. I'd love to help you find a solution to this problem

  To start, you are able to print an extended self-assessment report and it came out completely, or if you make a copy of a complete page, never there issues? This will contribute essentially to determine if it is the hardware or software, but since it seems to be sporadic we are not able to limit too much more. You can also try the steps of cleaning in this document "on paper" Error Message and the printer is not Pick Up or paper feed .

  Let me know how it goes for you!

• Can I print the last page of a PDF document using the command line?

  Hello

  I'm in a situation where I constantly have to deal with several documents in PDF format, and I need to print the last page in each of them and ONLY the last page. The total number of pages vary for each file, so the page to the last page number will also vary.

  I really prefer to not do it manually, to open each file in the visible window of Adobe Reader, and then print.

  Question:

  Is it possible with Adobe Reader (perhaps with the help of another Adobe product) to print only the last page of a PDF document using some sort of command line without having to open the PDF file in the Adobe Reader window visible?

  I use Windows.

  Thanks in advance,

  Kind regards

  Emil

  Hey, I've just set up a measure of inquiry by accident. That's really bad thinking. Here's what to do.

  When the "Create new Action" checkbox is shown...

  Choose Start with: a file open in Acrobat

  DO NOT CLICK on add a step statement

  Open tools more

  Click once on run JavaScript

  A blue line to run JavaScript must appear on the right side.

  Click on the small box under Options inside the blue line

  A JavaScript editor should appear; Enter the program, and then click Ok

  To save in: select do not save the changes.

  Click Save

  Give a name; you don't need to enter a description (although it won't hurt if you do).

• Print the brochure-page editing and print dialog box questions

  Hi people,

  I have a small organic seed in Southern California company and I am looking to do our first seed catalog using what I would describe as a "zine" format: a letter-sized document that is folded, resulting in a booklet composed of half pages (I don't know if there is a more technical term to do this (, please correct me). I use InDesign 5 and Mac OS X Snow Leopard.

  
  

  When I started doing the document, it seemed logical to start with my page as a 'half letter' size, because I had read about the "Print booklet" feature of Adobe that would automatically print the pages in the order appropriate for folding. After doing a few pages of my catalog, I decided to do a test run this function, as I suspected things may be more difficult that it seemed. I ran against two problems while doing so, and I hope someone here can help give me an idea.

  
  

  The first problem is that I can't get the pages to impose properly by adopting a system of alternative numbering on the pages themselves. To explain: I chose '2-top stitching horse' in the settings of the printed booklet. I have a paper of 10 pages of 5 blocks spread. In the menu document, I put my layout to start on page 2 so that gaps appear side by side in the pages. However, I also want page numbers on my zine so I started a new section number (which I gave an A prefix) on what is ultimately the fourth page of the layout. This numbering comes as '1' on the fourth page and produced consecutively from here (pages 4-10, on the spread in the page layout area are labeled 1,2,3,4,5,6,7 on the pages themselves). It seems that booklet printing think my second section (A) on page 1 is where it should start stitching horse formatting. The help section on booklet written print Adobe, 'If you have split the document into sections of page numbers, you should enter section page numbers (for example, Sec2:11) "in the range field.". However, they recommend only do that if you want specific pages to the format ranges, while I would like to format the entire document. However, I tried to do that, suspicious that the first three pages were not formatted properly. However, I could not yet find a way to clarify my section A in the range box. I typed in things like "SecA:1" but I get a message that says: "one or more of the specified pages aren't valid page names." I note when I stripped the formatting of the document the print booklet feature requires the pages in the correct order. Thus, this problem is not the end of the world. However, what I lost is the ability to have numbers of pages printed on my document, unless I want to manually add to each page (and then having to deal with reformatting if I ever add or remove pages of the document in the future).

  
  

  The second and more important problem that I have is to get the pages to print even close correct. I have a printer Brother HL - 5340 D laser has a two-sided feature, and I thought there would be a way to print just two pages of my catalog (half-letter pages) on a letter page size, side by side, double faces and in the right order for folding. After trying a number of different options (by changing the page size and the page orientation in the print area), I was not able to get the printer to print these pages, with success, or even in the right size and orientation - or even on the set of law, indeed. Once I played around with all the settings I managed to pull of "Tray1" (and created a preset in the OS X print settings), but I can't understand how I got this opportunity to stick. Of course, Adobe recommends using their own printer on the Brother driver dialog box, but duplex, for example, is impossible without ebb in the print based on the OS setting. I turned, something that has worked well with other InDesign documents I created. In this case, however, I have not been able for duplex printing to work.

  
  

  I wonder if there are conflicts being created between two printer settings, or maybe I just made a mistake starting my catalog with a letter paper size "half" and now try to print two of my pages letter half on a sheet of letter-sized (and double-sided, at that). As a neophyte InDesign (six months experience) I still wonder if there is something really obvious that I'm missing.

  
  

  Does anyone have a picture of my situation?

  Waiting patiently. Thanks people...

  
  

  Quin

  chirrchirr wrote:

  Peter,

  See the screenshot above (two positions to the top) where I show the "spreads" I made in the document. I have 56 pages in 29 spreads

  The number of "spreads" appearing in the pages Panel is misleading since several ov them don't have only one page. I do not see the whole Board, of course, but my guess is that all the "spreads" we do not have two pages. Normall is the first and the last spread that are singles, but you have done strange things with the numbering.

  In any case, is printing print booklet 28 pages. The only way that can happen if additional blank pages are added is if you did not include the original White you have created. You have to go into setup to display the print dialog box and select include blank pages there.

• my hp photosmart d110 is stuck trying to print the alignment page

  I use mostly my HP Photosmart D110 as a copier.  Yesterday, after changing the ink cartridges, it went to the screen that says it prints the alignment page.  It does not print.  I have it put off, sometimes by the button, sometimes by pulling on the power cord, but it turns on and says he has to print an alignment page.  He's stuck in this loop now, and I can't use it al all.  Help!

  Hi guidoguido,.
  
  Follow the steps below.
  
  1. remove the cartridges from the printer
  2. If the printer is on, disconnect the power from the back of the unit.
  3. wait for 1 to 2 minutes and make sure that the power is plugged directly into the wall before connecting the printer in.
  4. If the printer does not by itself, press the power button, and then wait for the printer to you ask to install the cartridges.
  5. try to re-run the alignment on the printer
  
  Let me know what you find?

• LaserJet 1102w: force print the second page, Laserjet 1102w

  Hello

  New laptop.  I can print fine from the front.  When I try to print double-sided printer, as normal stop, after that the first page is complete, but used 'popup' support to continue does not appear.  OK, I'm working on this one.  But is it possible that I can press something on the printer to say "go ahead, print the second page."?

  Thank you!

  Evan

  Hello @evanmjones,

  It is a great place to get help! I read your post and see that you do not get the option "Continue" to print the second when the double-sided page. I want to help you solve this problem.

  You can continue the second page by opening and closing the printer cover. (this model does not have a resume button)

  Make sure that manual duplex printing option is selected from the printer driver:

  1. Click on the Windows icon (), and then click devices and printers.

  2. Right click on the HP product and then click on printerProperties.

  3. Click the device settings tab.

  4. The manual Duplex allows to "Enabled" and click OK to save the change. (click on the + to expand the list)

  Ensure that the bidirectional Support is enabled.

  Go to start, devices and printers, right click on the printer, the printer properties, click the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  Try to print again.

  If you're still having problems, try printing from another application to see if you have the same results, it could be a setting in the application of double-sided printing.

  You need to maybe uninstall and reinstall the printer if the problem persists.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Printer does not print the entire page.

  original title: printer does not print the entire page.  Sometimes it will display only the left 2/3 of the page. It is running Vista and the printer is a HP Photosmart Premium.

  Problem HP printer.

  Ask in a forum HP or HP support.

• Data received, press CHECK BOX to print the last page

  Aloha

  I have an old HP Laser 4200 Jet that has been the back BONE of my business! I worked perfectly except for the last two days!

  He give me a "data received press CHECK BOX to print the last page" and print a portion of the last page with or without printing of the

  previous pages! It just started happening! Over the other day, I have my children of girlfriends! Is it possible that they pressed a button?

  I reset, but this problem persists! Help!

  SLY

  Hi Sly,

  Welcome to the Customer Support Forums!  I'll lock this accidental double post and lead everyone on this subject.  This will keep all your answers in one easy to find place.

  If you have any questions or concerns about this, feel free to contact me by private Message.  Thank you!

  Message edited by SandyD on 06/06/2009 17:07

• 1 - How do I print the test page? 2 - How to change the default printer?

  1 - How to print a test page?

  2 - How to change the default printer?

  Yes, essentially the same as in Win 7.   Select the properties of the printer to print the test page.  That's where.

• New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

  We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

  If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• officejet1100 HP does not print the test page

  7 the window running. The machine is hp deskdjet 1100, unsupported except in compatible file. Installed compatible driver hp dj 1000. Screen printer. Been the pillar for the test page. tell it to print the test page, order goes into Lake. Printer does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - DeskJet 1100 c - there is no Windows 7 drivers so check with HP
  Support and their forums to see if there are work-a-rounds.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14499&TaskID=135&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  HP - DeskJet 1100 - support
  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25525&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• hp4315 is in 22 minutes to print the test page. resolution of the problems of detection without problem.

  hp4315 is in 22 minutes to print the test page.  resolution of the problems of detection without problem.  Using Windows 7 64 bit

  This is caused by the failure of one of your cartridges. I'm not sure that the Officejet 4315 will print with a single cartridge installed, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Form to be completed online will not print the second page

  I created a form with two page Acrobat with Adobe InDesign.  Everything seems to be in agreement with the form, except that the second page does not print.  The first page prints fine, but the second page closes like a blank page without content in the form or the data entered by the user.

  2012-2013 development funding application

  Thanks to you all.  My Department has been able to help me.  Because the form was created in InDesign, I've exported as an interactive PDF and could not change the printing options.  Something in the configuration of InDesign required Postscript drivers and all our internal printers contain PCL drivers.  They added the PS drivers and we are now able to print the second page.

• Print the Test Page from the printer using prnqctl.vbs

  Hello. I have a HP Deskjet D4360 printer. As is the case with the ink more cheap jet, the print heads printers dry if they idle too long, and the expensive ink cartridge will lose. This printer is connected to my computer via a USB cable and is not on the network.

  What I want to do, it's automatically print a test page to the printer once per week. I want to this by setting up a task that calls prnqctl.vbs by using the following command:

  cscript C:\Windows\System32\Printing_Admin_Scripts\en-US\prnqctl.vbs EI Pei "HP Deskjet D4300 series"

  When I run (as administrator) command prompt and run this command, I see the following result:

  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  Failure Print Test Page 5 Win32 error code

  My understanding is that 'Win32 5 error Code' translates to 'access denied '. I checked the name of the printer is "HP Deskjet D4300 series", so this isn't the issue.

  For what it's worth, I use Win7 Home Premium 64-bit SP1.

  Any ideas as to what can make it work? Thanks in advance.

  Hello

  The question you posted would be better suited in the MSDN Forums. We have separate team working on these issues.  I would recommend posting your query in the MSDN Forums.

  TechNet Forum

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful.