HP6500APlus - brochure printing

Similar Questions

• OfficeJet 8610, 2 faces of bright brochure printing problem

  On my Officejet pro 8610 with brilliant for HP Brochure paper, I used the automatic printing function 2 faces to print color brochures.  Every attempt, the rollers in the printer's vertical on the front lines, as he was pulled back into the printer.  This is almost certainly due to inadequate drying time between the first and second parts printing.  When the 2 sides is done manually and allow enough dry time, the rollers don't cause streaks.  This problem didn't happen if plain paper or matte Brochure paper was used.  I tried with a HP Officejet 8620 and my 8610 with the same problem.   Is there a way to increase the drying time for glossy paper or any other problem?

  Hello

  It is not possible, although the duplexer is not intended for this side of paper and making such damage most probably the duplex accessory rolls.

  Please check paper output specifications > paper section capacity tray of the printer dpecifications below, the duplexer is intended only for 60 to 105 g/m2 paper. :

  http://support.HP.com/us-en/document/c04085902

  Shlomi

• Brochure printed in CMYK seems always bad

  so... If using 'export' and convert an RGB to CMYK image using the available export settings it seems perfect... but this will create a PDF file on 4 pages instead of 2 pages divided into half the way I created the layout.

  So if I use print booklet that preserves the split layout... impression (creating a PDF) works very well if the parameters are RGB... I have two pages split and fitted correctly with appropriate colors.

  Now here is where it gets complicated...

  If I use print booklet with parameters CMYK booklet fate more saturated and pixelated.

  So I need to convert the images to not trying to print a booklet with images RGB and CMYK right... not the case.

  Even when you use photoshop to convert to CMYK, even if I leave the image faded, as conversion to CMYK often is the case, the output of Indesign when using "print booklet" produces a more saturated and result pixelated.   I even put an RGB image next to the same picture converted to CMYK and production, they become almost indistinguishable. So why export works adequately but not to preserve the layout and print brochure preserve the layout page but mess colors in CMYK?

  Hard to say without knowing your settings distill.

• Brochure printing does not print all pages

  I have a file booklet that I printed from InDesign, a couple of months without problem. I went to print this week and the last pages 2 and 3 are not printing. I tried with a version of the file created by someone else. Same problem - last pages 2-3 didn't print. I tried to print to another printer, print from another computer. I always get the same result - the last 2-3 pages do not print. This happened to someone else? Anyone know what I can do about it?

  Thank you

  Tery

  An alternative:

  1. One of the manufacture of booklet scripts * for InDesign, allows to create a new InDesign doc "double width" properly imposed in the order of the brochure.
  2. Print the new Doc, or export it to PDF.

  * See, for example, the free script to the "http://sterlingcomputing.com/make-booklet-2016.html". (I am the author).

• Brochure printing error message

  Even if all my PAGES have the same specified size (letter size), when you try to print a brochure I get this message: "the active document uses multiple page sizes. Print book only works with documents that use a consistent page size"not allowing no not to me to impose my document.

  My finished booklet size is letter size with bleeds, but the size of the PAPER for the "spreads" is tabloid size

  Help please.

  This is a known bug.

  Copy/paste of the bad file on a new

• Image on the back and the front pages in the brochure printing

  Hello.

  I have a riddle.

  I want to have an image that extends over the back and the first page of a document, which will be finally printed booklet style.

  I am struggling to get this just so if I put in place with gaps, i.e., I'll have to place the image twice and try and guess the marriage of the central point.

  Or I can allow pages Shuffle which allows then to me the last page in the front of the first page to allow me to place the images on the area, but then it live to the printing of the brochure.

  Any advice?

  Or you caan place once and place them correctly on the page or the police back, then copy and paste them in place on the other and they will be perfectly matched.

• Brochure, printing pages in reverse

  Help, please!

  I lost a lot of time and paper today trying to figure out why this is happening!

  When I go to print a brochure, some inside pages are printed backwards.

  I went through every single setting in Indesign times and my printer settings and that you can not drive wots going on!

  When I go to print the booklet, the Preview Panel shows all correct, but wot prints is in every sense.

  Please someone help before I go out my hair! lol x

  I found this article useful in the InDesign print booklets.

  Guide to the print booklet in InDesign function - WSA

• Brochure printing, printing of multiple signatures

  Hi all!

  I use Acrobat 9 and MP198 printer to print a manual of the game. The manual is about 13 MB in size, with 45 pages.  I would like to print the manual in format brochure on legal size paper, but instead of multiple sheets by signature, I would print 1 single sheet (4 pages) by signature so that I can just paste instead of the usual couture.

  1. is it possible to print more than one signature at a time?  For example, to print pages 1-4, 5-8, 9-12.  My experience with this is that it prints pages 1-12, resulting in a signature of 3 sheets instead of 3 leaf signatures.  Now, I have to specify 4 pages per print job so that each sheet singature is printed separately from the rest.

  2. looking at my queue of print screen, I noticed that each signature is 160-220 MB in size, for only 4 pages.  Accordingly, I have to wait for each signature to finish before printing the following or the printer and the PC slows to a crawl.  No idea why this is happening and how to fix it?

  My computer is an old Athlon clocked at 1.8 GHz with 512 MB DDR RAM, if that helps anything.

  Thank you!

  Take a look at enough imposing? If it can be done, QI can do.

  http://www.quite.com

• In a brochure printing problems

  I have a HP Officejet Pro 8500 has.  I want to print as a booklet.  I had another printer of the same brand, but bought an update because the other stop working.  The old print booklets without problem.  He refuses to do so, even if I follolwed meaning explicitly.  It prints two pages in small print at the top of the sheet, leaving the white background.  It turns to the and did the same thing on the other side.  It should print a page on each half of the paper, go back and do the same on the other side.  When it is folded in the Middle constitutes a booklet.  Is there a problem with the machine itself?  I configure to print page 2, basic shape, all pages, size, print before backward, turn on the short side of the landscape.  What else is there to do?

  Hello

  1. what operating system is running on your computer?

  2. based on what application you print the booklet?

  3. it worked earlier? If so, remember you have changed your computer?

  4 is not specific to an application or does it happen with all applications?

  Provide more information so that solve us the problem.

  You can also check out this link: printer in Windows problems http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• OfficeJet Pro 8610 X 64 8.1 win question over both sides of the pdf, Word Doc multi-page brochure printing.

  HP Officejet Pro 8610

  HP Envy laptop

  8.1 Windows X 64

  Printer will not print back of the pdf booklet by choosing the best quality.

  Get the message "Cancel printing" on printer when trying to print the second side.

  kicks then paper.

  In addition, printer does not multi make page print job when printing on both sides Word 2013

  document.  Stops at random page number, get message «Cancellation of print» print

  printer.

  Complete features uninstalled and reinstalled software by following the instructions

  by HP Support Forum's message dated 23/09/2014.  Problem

  There are still.

  Hey!

  So happy to hear that everything is in place and functional for again you!

  Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Better luck in the future and have a great day!

• Creating a press ready brochure printer spreads for InDesign

  Is it possible to create a custom from InDesign page size when I use the printed booklet > print settings > Setup > PPD: generic PostScript printer? I need to be able to focus a 8.5 x 17 printer spread with cultures and funds lost on a sheet 12 x 18 for my digital print provider. Currently, this option is not available, and I can't find a way to create and preserve a sheet 12 x 18, so that I can select a paper size.

  The PPD: Selection depending on the device does not allow for any installation at all, and for the installation of the printer generic Postscript, the largest size of printer paper is limited to A3 (11.7 "x 16.54").

  See #5 here. You will need the Adobe PDF 9 PPD with Distiller to create custom page formats:

  Re: Printed booklet post script does not work

• Brochure printing: export for sewn bound

  Forgive me for asking, but I can't find an answer anywhere.

  I'm working on a graphic novel and I intend to print it to a print on demand company.
  The binding will be linked to the sewn, which is very common for the 100 + page books.

  Here's what I don't understand: sewn bound saddle-stitched hands (about 6 of em) used to have 24 pages sewn in total.

  Then, many of these sewn granted are stacked one on the other and glued to the saddle using the limit-perfect technique.

  How can I export all of my pages when the sting to horse and perfect bound are combined?
  My guess is to export each 24 pages through saddle stitched. Then, people from the POD company can print these stars, stich em and stack on each other
  to paste and fineally wrap cover autour.

  Someone with experience in this area?

  Kind regards

  In General, it is the responsibility of the printer to make the tax and that you shouldn't do anything other that provide a normal PDF in simple sequential pages, but ALWAYS check the printer to find out what they need.

• Change of color in the PDF export and brochure printing

  InDesign CS5 Windows 7 64 bit

  I need to provide a client with both a composite PDF of a manual to use on their website and a PDF of a composite booklet even content to go to print (managed by their printers separations).

  The document is strictly two colors: black and pure Cyan - no other colors involved. Only imports are EPS of CorelDraw format diagrams which also use that same two simple colours.

  When I export to PDF, no problem: Blacks are 100% black, cyans are 100% cyan. When I export this manual, Blacks are still very well but the cyans becomes C:69%, M:14%. 100% Cyan color applied in CorelDraw and applied in InDesign itself all come out them with the same results.

  I tried to change a lot of output and management settings of colors in the print booklet application but still get the same result despite the use of the same what is CMYK color profile used for the right PDF export.

  There are no complications of PhotoShop imports or conversions from RGB image, so I can't understand what is going wrong here.

  Any thoughts?

  I would check the default settings for the PDF printer. Looks like a profile mismatch.

• Questions of transparency when brochure printing

  In InDesign (CS6 on a Mac 10.8.4) I placed an Illustrator file, reduced its transparency to 10% and settled at the back like a watermark. Above I placed a Photoshop file. The document looked fine on the screen and printed correctly when you export to PDF, but when I went to print booklet, graphic Illustrator was knocked out at the top of the Photoshop file. I tried to put them on separate layers, locking layers, put the graph on the master page, all to nothing does not. I finally gave up and exported the graph to a JPG file and that worked, but this isn't a very satisfactory workaround solution. Anyone can shed light on what is happening here? Thank you!!

  Have you tried to check simulate overprint in the print settings?

• Error when brochure printing

  When you try to print the booklet from InDesign cs6 bed of error: the active document uses multiple page sizes. Print book only works with documents that use a consistent page size.

  I went into the preparation of the document, the icon at the bottom of the menu of pages that allows you to edit the size of the page, change the size of the same master page try and apply master to pages. None of this removes the error message when you try to print the booklet. If possible please help me.

  Glad to inform that this bug should be fixed in the next version.