hp7350 print Mac 10.6.8

Similar Questions

• Photosmart B110 suddenly stopped printing (Mac user)

  Photosmart B110 stopped printing (mac users)

  My printer, which worked very well last week suddenly stopped working. It is not configured for the wireless, but is connected by cable to my Mac (OS 10.6.8). The printer is turned on, the computer attempts to send that message printer is put on the queue. Then it disconnects. But befoee does, it does not print the last piece (5 lines), text file, then a line of gibberishg.

  I went through the page, deleted in case of problem, printer drivers according to the instructions but then realized I couldn't add them back again. The Mac can't "see" the printer with the USB cable. And there seems to be no way to add them to the "add a printer". It is empty.

  So now, I can't even all print.

  Would appreaciate any help I can get. Thank you.

  Hello

  Try to restart the Mac and printer and check any change.

  So make sure that the most recent driver is installed by clickign the icon Apple, then software update.

  If this does not help solve the problem try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now go to Applications > Hewlett-Packard > utility device, follow the HP installation wizard and try to print again.

  Please let me know if this is useful,

  Shlomi

• Envy 4524: Envy 4524 not printing mac

  I can't print from my mac to my envy of 4524.  I put in place airprint and on the site of the printers, I can print a test page.  I can also print from my phone so airprint and the wireless appear to work well.   When I print from my mac (Word for example), I get "unable to connect to the printer" and then some time later it can print the page or about a third of the page. When I say an age is more than 10 minutes.

  I deleted and reinstalled the printer, I have reset the print settings, I made sure I have the latest version of the driver and now I'm getting a little frustrated.  OK a LOT frustrated.

  Hello @Northy62, thank you very much for your answer.

  It looks like a problem with the permissions of a MAC disk. Try the below mentioned steps.

  • Follow this document to completely uninstall the printer software: http://hp.care/2cKwLyC
  • Also reset the printing system, as explained in the above message. (Do not add the printer)
  • Go to disk utility by pressing "Control + space" to open the Spotlight search, type "Disk utility" and press ENTER. You can also click on the Launchpad icon on your dock, click on the folder 'Other' and click disk utility.
  • Select the system partition of your Mac - usually "Macintosh HD". Click on the button 'Verify disk permissions' and wait until the process is complete.
  • Now click on repair disk permissions to check for problems and fix them automatically.
  • Restart your MAC and then go to http://hp.care/2d9xwkW to download and install the printer.

  Please let me know if it works for you. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

  Mac OS X 10.6.8

  HP Scan app 4.4.1

  In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

  Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

  1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
  2. Click Save .

  Hi milolo,

  Thanks for your post and welcome to the HP Forum.

  Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

• Photosmart C309n: Photosmart C309n TouchSmart Web all-in-one printer MAC OS

  I recently bought an IMac... I can no longer print both sides of the paper. I use it a lot and it is dri ving me crazy. Is there a driver or something I need to fix this. I don't know if there are other problems with MAC OS, but this one, I need fixed.

  Thank you.

  Hello @Cheryl75684 and welcome to the Forums of HP.

  I see that you are having problems printing double faces.  There is currently no HP software for this printer available to 10.10, so the printer runs the print driver based Apple.  The absence of two sided occurs in the Apple driver.

  Please let me know if you have any questions. Thanks for posting on the HP Forums.

• 5510 printer/Mac 10.7 fail to complete the installation after said to unplug the USB.

  Have installed the relevant software & drivers such as advised by Apple/HP as disc not suitable for my Mac 10.7. After going through the installation process complete Mac fails to find the printer wirelessly after saying to unplug the USB cable. The printer indicates that there is a wireless connection to my router wireless of AOL, but still I get the message "select devices below" but having contracted the USB cable, there is no display device.

  ... Hello again.

  It seems now that HP Support have found the problem so let me give you some information.

  I called the Apple Technical Support on the advice of the staff of the local Apple store but it told me that it is acknowledged as a problem as Apple have already tried to solve the problem and failed he spent on HP.

  I spent 50 odd minutes on phone to the call center of Newcastle (which was fantastic) and now upward and the operation.

  We have downloaded 2 updates of for Mac and printer 5510 (firmware).  In the preferences system (Print & Scan) the file sharing box has been checked (and also ensured that the sharing printers, file sharing and the sharing of scan have been checked).  This has allowed to get up and running with print but then had a problem with scanning.  We then cut to reset (in that order)-router, Mac and printer, then turn it back on in reverse.  Then we have the source of installation of scan in the menu of applications under Hewlett Packard/HP Scan 3.

  I hope this helps.

  John

• HOP, 7760 Photosmart printer Mac OSX 10.6 - offline

  I got Photosmart 7760 for quite awhile and have been using it extensively with MAC OSX 10.6 until 2 days ago.  Then printing guest said that it is in offline mode.  I've been online for 2 days to look for solutions... with absolutely no success.  Downloaded the drivers... all unplugged and reconnected... downloaded the drivers.

  I can't get the printer appears in the printer preferences... I am at a loss and really, really need this printer.  There must be a solution, but my intermediate understanding of all this technology completely failed me.

  Any help - will be greatly appreciated!  Thank you!

  job1970

  I GOT IT -! I finally found a few previous posts and downloaded the universal drivers... worked instantly!

• LaserJet M1536dnf MFP: LaserJet M1536 don't not printing Mac laptop, all lit LEDs under LCD

  My LaserJet M1536 suddenly no longer print from my Mac laptop. And Yes, I downloaded the HP printer from the Mac App Store software was last updated.

  Under the LCD of the printer are three lights that stay on, even after that I power on and off the printer (the LEDs are green, the orange exclamation point and the orange point then). I don't know that the fact that all three LEDs remaining on the means, but it seems to be indicating a problem exists.

  Please help with advice to rectify or isolate the problem at least.  Thanks in advance.

  Do a google search, but the price will be high.  You can try a company call metrofuser.com because they can get a better price.  Good luck.

• OfficeJet 7310xi router wireless for printing mac?

  I have an Officejet 7310xi portable printer and I have connected via a cable or net to my netgear router. On my PC I can see that the printer is connected I activated the print share, and I can print wireless from the PC. However on my MAC I can not function. I tried adding the IP address in the add a printer from the printer section and router box still nothing. The printer works fine with a USB connected, but I can't make it work wireless. Any suggestions?

  Hello

  Unlike Windows, Mac OS X uses Hello to communicate with the devie through network...

  Some router supports the protocols used by Hello (aka. Multicast), some preshipped with this support disabled and some models do not meet these conditions to all the...

  Please specify your model of router, thus you version of Mac OS X in order to better understand what can cause the problem.

  You can also try to add the printer using IP to circumvent the use of Hello and get printing features, be aware that this analysis does not work on Mac using this configuration:

  Under printing & scanning, click plus the sign and then click the IP tab.

  Choose the HP Jetdirect decision-making and type of printer in the field address.

  Click Add and try to print using the new queue.

  Shlomi

• DeskJet 3050: HP Deskjet 3050 not printing MAC

  I just bought a new iMac and I plugged my old Deskjet 3050. The drivers are installed and I can choose the printer but when I click on print nothing happens.

  The printer works on my old Surface RT.

  Hi @F45 ,

  I understand you are having problems printing of Yosemite. I'd love to help you.

  The drivers are installed by the Apple updates. Install a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Deskjet 3050)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  

  

  Try to print again.

  If you're still having problems, try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Test the printer.

  Please let me know the results.

  Good day!
  Thank you.

• Download of the printer Mac address

  I have a 6600/6700 officejet all in a printer, scanner and fax that is currently executing a software for windows and mac os x. computer disc it loads only mac os x 10.5, 10.6, v10.7, version 12.14.0 and loaded down our windows successfully. The problem we have is that my son computer is a laptop mac os x 10.8.4 and low custom load the disc to set up. Could someone please recommend a way or another disc which will allow us to download on my son's computer, so we can use it to make printingon distance our new printer hp officejet 6600on our new printer the hp officejet 6600.

  Thanks Allan

  Hi Allan,

  Please visit the link below and you need to download driver for the officejet 6600 for Mac Os 10.8.

  Please download and run on Mac OS.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4142&LC=en&cc=us&DLC=en&sw_lang=&product=5304873#N340

  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

  Concerning

  Aneesh

  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

• Print Mac 10.6.8 paused, and is located in Quebec on 5520 all-in-in-one

  I tried all recommended the Forum to solve my problem. I am still unable to print from my book mac on my 5520 Photosmart all in one printer, even if I can of my ipad!

  I even deleted all the HP software and re-installed.

  Any help will be really thankful that I'm out of ideas.

  If I click on the tab for the printer info, it says the following.

  /Library/printer/HP/cups/inkjet8.driver/Contents/MacOS/inkjet8 message has no job

  Have you checked to see if there has been an update to your BT router?  You may have to restart the router and your printer to re-establish a proper network connection.  Also, neon brings a good point, make sure that you use a 5 GHz, the printer will not be able to communicate on this band.

• HP 5610 all-in-one printer not printing Mac OS 10.5.8

  I checked the connectivity with a test print which bypassed the drivers and the test print printed successfully. I also see that my Mac to recognize my printer because it does not appear when I go to print. And then, of course, I can see the name of the printer in the qeue, which shows the complete repleated jobs and yet nothing came out of the printer.

  Recently an upgrade did to my operating system, but I was able to print since then. This question arose after the loading of cartridges new yesterday morning. Thanks in advance for any ideas.

  Try to remove the printer from the list. Then run repair disk permissions (applications > utilities > disk utility) and add the printer.

• Vista troubleshooting for hp7350 printer with VISTA

  Downloaded the driver updated (several times!)

  Printer Test page prints beautifully, printer ink.
  Check all the parameters properties for printing
  header and footer appear clearly
  the body of the document is only a ghostly image
  has tried: stored on line document, pdf version, documents created in Word

  Hello
  All changes made to the computer before the show?
  Method 1:
  See the link, run the Fixit and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us
  Method 2:
  Check the link and try the steps in the article.
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  Method 3:
  If the methods above do not solve the problem you can check this link and follow the steps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  You can also visit this link and check with the support of HP.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=72887&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=72885