HP8600: Wireless router connection

Similar Questions

• Problems with my wireless router connection.

  Whenever I log on my computer I have to manually connect to my wireless router because it has been replaced by a smaller wireless router in my neighborhood.  Sometimes I connect to my wireless router a second time then on the Internet. My modem is not working properly and my wireless router has a strong signal when it is running. Is this sound like it might be a problem of isoftware of Windows XP?

  Hi Leslie,.

  You can check if this article helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Wireless router connected to the provision of internet access no

  I've just moved to a new place and have connected my router (WRT610N) wireless to my switch located in the smart panel in the basement (SE2500). Connect my ultrabook to the wall confirmed that the signal from the switch in the basement is sent up, but if I connect my router making wireless and connect to the wireless router I have no internet access. Someone knows what's going down? WRT610N

  Yes, but you must properly configure the 2nd router.  Wired is the only medium, 2nd router, disable DHCP, set router IP 192.168.1.2, connect you via LAN - LAN.

  Go here for help.

• Wrt54g Linksys Wireless Router - connected but not display page

  Halo!

  I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.

  What seems to be the problem here?

  TIA,

  wilardboi

  Please reset the router and reconfigure:

  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Open the configuration of router with 192.168.1.1 page... White-username and password: admin

  To configure the wireless router.
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here the wireless network mode must be mixed
  -Provide any name in the name box of the wireless network (SSID), while
  without space between the two cases.
  -11 wireless channel
  - And wireless SSID broadcast should be enabled and then click

  Save
  Parameters.
  Please take note of the name of the wireless network (SSID) because it is the '
  Network identifier.
  For wireless security: -.
  Now click the sub-tab under wireless > wireless security.
  Change the mode of WEP wireless security
  Encryption must be 64-bit.
  Let the empty password, do not type in anything whatsoever.
  And under type WEP Key 1 in all 10 digits please. Click Save
  Parameters.
  Please note the 1 WEP key as it comes to the security key for the
  Wireless network.

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• The 5 GHz wireless router connection

  I have 2 laptops (Inspiron 1525 and 1545) and I was wondering if I can connect to my dual band 5 GHZ router with this?  I don't see the SSID in my area wireless on my computer.

  My laptop are compatible with a connection to 5 GHz?  If not, is there an adapter for it, how much, and it is easy to do?

  Alex,

  A wireless USB adapter 5.0 GHz network is the fastest and easiest way. You can buy a card to install the appliance. The adapter inside the probable has 2 sons

  Rick

• HP Deskjet of 3630 3630: HP printer 3630 AirPrint - connection to the wireless router connected to an iPad

  A friend just bought a 3630 HP printer and has implemented and able to print from the iPad but, to do so change the Wi - Fi connection setting on his iPad between the router and the printer, and then when the printing is finished return the iPad.

  How can she change WiFi the printer setting to match that she has for the iPad?

  Lets see if we can get lucky.   Disable the WiFi Direct from the front panel.

  In reading the manual...

  To turn Wi - Fi Direct or off
  On the printer control panel, press the button Wi - Fi Direct ().

  ● When Wi - Fi Direct is activated, the Wi - Fi Direct light is stable. To find the name of Wi - Fi Direct and
  password, press the information button () to print a printer information page.
  NOTE: When you turn on Wi - Fi Direct the first time, the printer automatically prints a Wi - Fi Direct connection
  Guide. The guide provides instructions on how to use a Wi - Fi Direct. After that, you can press the Wi - Fi
  Direct button and the Info button () to print the guide of Wi - Fi Direct. The
  Guide are not available in all languages.

  ● When Wi - Fi Direct is disabled, the Wi - Fi Direct light is off.

  ● For more information on the situation of light Direct Wi - Fi, see the control panel lights and display icons

• 3630 air print: 3630 to new wireless router connection

  Hi, I changed my router, and cannot get my print printer 3630 look to connect with my I pad any help appreciated

  Thanks for the reply, however the solution after a lot of research, is press the wifi button and cancel on the printer for three seconds to set the printer mode, go to the wifi settings on iPad select printer say's in the fashion game, return to AOI app and follow the instructions, insert the new password to router and printer will recognize network.

• When you use private browsing, your web history is connected to your wireless router?

  I know that during private browsing, even if your browser does not save history, passwords, etc., that your browsing history may be followed by Web sites and your ISP. When in private browsing mode, your browsing history is getting connected to your wireless router?

  Yes, PB has no effect on the information stored in a journal of router.

• Pavilion dv7. Intel Centrino Wireless-N 6150; Cisco E4200 router = No Wireless N connectivity

  Hello everyone, I need big answers and great help. I recently bought a HP Pavilion laptop dv7, who has a card intel centrino wireless-n 6150 installed. My router is a Cisco E4200 5 GHz wireless router. The pity is that the laptop (dv7) does not recognize my Wireless N (not even standing next to the router). Does anyone have any idea or advice on how to make this work?

  Any help will be appreciated.

  Thank you

  Hello

  Intel Centrino Wireless - N 6150 is a single band card (this card is the product of WiFi only single band 802.11bgn in the Intel Centrino Wireless 6000 series).

  Connect to the router, then activate the 2.4 GHz network (5 GHz network can be defined as being disabled).

  When you do this your wireless card should find network.

  Here you will find the guide of the user for the Linksys router.

• Satellite Pro L300-1 b 9 cannot connect to my wireless router

  Hello!

  I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
  First I had to find the switch to turn on (I never got :-)).
  Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

  But in Linux and Windows, I couldn't connect to my wireless router.
  My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
  The test was succecfully with this network, but my wireless router was inaccessible.
  The other machine I could reach it.

  The result was:
  If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

  But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

  A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

  Someone knows why? What should I do to I could hide the SSID to the bad guys?

  Thanks for any help!

  With regard to:
  DD

  I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

  It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

  In my opinion, there is a problem with the WLAN settings.

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• NB300 will not connect to my wireless router

  Can someone help me please?

  I have an old week NB300 laptop computer that has a built in Atheros AR9285 wireless network adapter.
  I have problems connecting to my D-Link wireless router/AP.

  None of my other wireless products have connection problems, and it is only this laptop that won't.
  I have reset the modem/router, I unplugged the adapter wireless in Device Manager and updated drivers.

  We can see broadcasting and all other my neighbours routers, but just used to connect.

  Any suggestions out there?

  Hello

  You mean NB300 can see your WLan and other WLan in the neighborhood, but cannot connect?

  This would mean that the WLan is enabled correctly because the WiFi network around you are visible
  In any case, check if you have enabled the WLAN using the FN + F8 key.

  In addition, you should go to the properties of the wireless network and need to check the TCP/IP protocol. Disable the IPV6 Protocol and use only IP v4

  In the properties of the TCP/IP Protocol, you should check if all options are set to automatic.
  MAC address filtering, no encryption, encryption password must be checked as well!

  By the way; Here you will find the latest Wlan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them