Hyperion Planning 11.1.2 formula line and a column formula

Similar Questions

• How to dynamically add any control (digital button, boolean) to control the line and selected column

  Hello

  How to add a control (digital button, boolean) dynamically in control instead of lines and columns selected. Please suggest the idea or no matter what example code you have please share with me...

  Thank you

  Vieu

  Essentially, that's what you're looking for:

  

  Please note that you have to account border sizes and the label of the control so that the code does not work right out of the box. You should also check for the height and width of column and if the position is valid at all before moving around the control.

  Norbert

• adding data lines and multiple columns with a form

  I need to add multiple data rows and columns to a database using a form online and don't know what would be the best method of data entry and of insertion.
  
  The data should look like this:
  
  COLUMN1 COLUMN2
  var1, var1
  var2 var2
  var3 var3
  etc...
  
  When you create the form do I create individual text fields for each var or would it be better to have a text field where they list the data. I don't know where to start.
  
  Any advice would be great.

  You can use line numbers in your domain names to associate the columns for a particular record. For example, suppose you want 5 rows enter the last names and first names:

  
  
  First name:
  First name:
  
  

  This will give you a series of areas such as lname1, lname2, fname2, $fname1, etc.

  In your form, you can also include a hidden field to indicate the number of lines.

  When you process the form, you loop again to insert each line:

  
  
  INSERT INTO mytable (name, first name)
  VALUES ("#Form ["lname"& onerow] #") ',' #Form ["Pnom" & onerow] #')
  
  

• Hyperion Planning / essbase change codes member = lost data?

  Hello

  I was talking with a coleague and I mentioned that when I change the codes in Hyperion Planning, codes are modified in Essbase and data are not lost. She mentioned that she did not know essbase couldn't recognize that code and data would be lost.

  Is it controlled on the side of planning, searching for existing id and change only the code of Member in essbase and works well thanks to the planning of the interface, so that if you change it directly on the essbase outline, data will be lost?

  Thanl you

  If you rename a member in the planning and then run an update, the Member must be renamed to Essbase, so the data are kept, try and see.

  You should never be rename planning members directly against Essbase outline, how it should work plans > essbase not the other way around.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hyperion Planning Dimension building techniques

  
  Hello

  I am currently working on Hyperion Planning 11.1.2.1.

  I am interested to know the size of construction planning.

  1. What size technical construction available for Hyperion Planning 11 other than DRM, FDM and technical manual?

  2. I read in a blog this load utility contour doesnot work with Hyperion 11 x for dimesion building and "Hyperion Dimesion Library" is available in its place. Is this true?

  But we use the contour load utility to load exchange rates in our 11 version application.

  3. I worked on the ODI 10 g and 11 g with Hyperion 9 x

  Hyperion provides 11 compatible x in dimensions of building using ODI from scratch and also adding members to an existing hierarchy according to the evolution of the business?

  Thank you!!

  Methods - outlineload utility, ODI, Interface Tables, file of ADS.

  the outlineload utility is for Classic applications for metadata loading.

  Yes, ODI is compatible.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• The IKM selector selection error: IKM SQL for Hyperion Planning

  Hello
  
  On the tab 'Flow' of my model, I click on my head to target. Then on the drop down 'Selector IKM', select 'IKM SQL for Hyperion Planning. It gives the error:
  
  Internal error: ODI-15526: IKM IKM SQL for Hyperion Planning not accepted for stage director and target technology
  
  
  Any ideas? I am really new green on ODI and I am at the end to try to run my dimension build. Any help is appreciated.

  You must select a transit area which is different to the planning, because this isn't an intermediate technology supported. What you need to do is to go to the tab definition of your interface tick the 'target different transit zone"and then select a relational technology (that is, one that takes supported SQL) in the drop-down list below. If you have no relational db on stage your data and then select ENGINE SUNOPSIS MEMORY which is the memory in DB that is provided as part of the ODI.

• Hyperion Planning calco - FIX and IF condition script.

  Gurus

  I'm new to Hyperion Planning and have a question:

  I'm writing the script of followgin and he looks up and as the listed error.

  SCRIPT:

  / * STARTCOMPONENT:SCRIPT * /.

  COPYMISSINGBLOCK OFF SET;

  DIFFICULTY ('AC_91100', 'AC_91380', 'AC_92105', 'AC_93100', 'AC_94105', 'AC_95100', 'AC_96100', 'BegBalance',

  ('Current Service level', 'FU_0', 'FN_00000', 'LO_000000', 'FD_100', 'FD_200' and ProposedYear,"Baseline",@Relative ("project", 0), @Relative("Total Entity", 0))

  ("AC_91100"

  IF ("Start Date"->"projected" is #MISSING AND 'End Date'-> 'projected' == #MISSING)

  DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';

  DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "

  ELSEIF ("Start Date"->"projected" == #MISSING AND 'End Date'-> 'projected'! = #MISSING)

  DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';

  ElSEIF ("Start Date"->"projected"! = #MISSING AND 'End Date'-> 'projected' is #MISSING)

  DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "

  )

  ENDFIX;

  / * ENDCOMPONENT * /.

  Error message when I validate the script:

  An error occurred while parsing the script.

  Please check the script between the column in the row: 9: 71 and column: C9: 78.

  Found token '#MISSING'- expected tokens: <EOF>,<DIGIT>,<LETTER>,"/*STARTCOMPONENT:SCRIPT*/","/*ENDCOMPONENT*/","/*STARTCOMPONENT:FORMULA*/","/*STARTRULE*/","/*ENDRULE*/","/*STARTTEMPLATE*/","/*ENDTEMPLATE*/","\"File\"","\"Binfile\"","\"DSN\"","DataExportLevel","LEVEL0","\"LEVEL0\"","INPUT","\"INPUT\"","DataExportDynamicCalc","DataExportNonExistingBlocks","ON","\"ON\"","OFF","\"OFF\"","HIGH","LOW","DEFAULT","ONLY","AFTER","SUMMARY","DETAIL","ERROR","WARNS","INFO","NONE","DEBUG","WARNING","DataExportDecimal","DataExportPrecision","DataExportColFormat","DataExportColHeader","DataExportDimHeader","DataExportRelationalFile","DataExportOverwriteFile","DataExportDryRun","@_false","@_true","NUMBER" , 'MEMBER', 'BOOLEAN', 'STRING', < COMMENT_CPP_STYLE >, < SPACE >, "/ * ',' ' * / ', '\n', < token of type 56 > '\"","\"","\n', < token of type 60, > '[[',']]', '\n', < token of type 64 >, < SUBST_VARIABLE >, < hfm_VARIABLE >, < MACRO >, < REAL_NUMBER >, < INTEGER_NUMBER >, ' Tot ', 'ALL',"\ 'ALL\' ", 'AND', 'TABLE', < CALC >, 'CCONV', 'CLEARBLOCK'" ,"CLEARDATA","DATACOPY","DATAEXPORT","DATAEXPORTCOND","DATAIMPORTBIN","DIM","DYNAMIC","ELSE","ELSEIF","ENDFIX","ENDEXCLUDE","ENDIF","ENDLOOP","EXCEPT","FOR","ENDFOR","FIX","EXCLUDE","IF","LOOP","MBR","NONINPUT","EMPTY","NOT","OR","REFERENCE_TO_PARAMETER","RUNJAVA","SET","TO","TOLOCALRATE","UPPER","VAR","DATAEXPORTOPTIONS","AGGMISSG","CACHE","CALCPARALLEL","CALCTASKDIMS","CCTRACKCALC","COPYMISSINGBLOCK","CLEARUPDATESTATUS","CREATENONMISSINGBLK","CREATEBLOCKONEQ","DATAIMPORTIGNORETIMESTAMP","EMPTYMEMBERSETS","FRMLBOTTOMUP","FRMLRTDYNAMIC","LOCKBLOCK","MSG","NOTICE","REVERSE","REMOTECALC","UPDATECALC","UPTOLOCAL","::","#MISSING","=","->",<EQOP>,<MULOP> , < MDXMbr >, < SHORTQUAL >, < ID >, < INTEGER >, < CHAR >, < RELOP >, '@Loopback', < FUNCTION > "(", ";", ",", "[","]", "{","}", "-",") ReplaceAll ',' ','. ',' + ',': = ','": ' "

  *****************************

  Let me know what mistake I am doing here. Any help is greatly appreciated. Thanks in advance.

  Thank you

  SR

  A few errors in this script:

  1 DATACOPY is not allowed inside the IF block. You can use the assignment ('=') instead of datacopy

  2 ENDIF is missing. You should have ENDIF before hook closing.

• Hyperion Planning and Essbase

  I have a question about how essbase is related to hyperion planning.  specifically, I would like to know if you can vectorize in essbase and then associate them with or have them cross to a hyperion planning an application.  I read that if you make a change to an essbase outline, and then refresh the hyperion application applications settings, including an outline, will be replaced.  It seems that master control is integrated with EPMA or hyperion planning because all the dimension and the main lines of work needs to be done here.  However, it seems to me that there may be times where you want everything works on and change the contour in essabase and have changes go through the application of EPMA, because it's maybe easier.  Is this true and if so, how do the changes so that they appear in the hyperion application that was created by EPMA.

  The flow is planning for Essbase, it cannot be reversed.

  If it's a planning request EPMA then the stream is EPMA > planning > Essbase

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hyperion planning and EAS console is unable to connect Server Essbase

  Hyperion 11.1.2.3.502

  We had essbaae in active/passive cluster and the environment was ssl is activated.

  Recently, we removed the ssl configuration

  Now, we are not able to connect to the planning and the Regional service console essbase Server

  Have no problem connecting to essbase maxl or view smart server. We were also able to import into fdmee essbase.

  Check the data source planning and validation of all the

  I am getting following error when you use the Regional service console

  Essbase Server: servername:1423 com.essbase.eas.essbase.defs.ServerCommands.Connect 16 December 2015 17:57:15 EST

  Error: 103: unexpected error Essbase 1030818

  Error: 1040142: NZERROR: nzos_Handshake failed (28864)

  Error: 1042006: error network [0]: unable to connect to [cs2chypebp01:1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  When you go to the planning, I get following errors in the log files

  [2015 12-16 T 19: 20:10.616 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
  [URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: createObject] Impossible to establish the OLAP connection: {0}. []
  com.hyperion.planning.olap.EssbaseException (1030818)

  
  [2015 12-16 T 19: 20:10.618 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
  [URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: getConnectionInternal] could not establish the OLAP connection: {0}. []
  java.lang.Exception: no object was created successfully. This may be caused by the following: the OLAP server is not running, the DBMS does not run, the DBMS is running on a different
  Rental machine as specified, the name and the password provided was incorrect.

  
  [2015 12-16 T 19: 20:10.192 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
  [URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: createObject] Impossible to establish the OLAP connection: {0}. []
  com.hyperion.planning.olap.EssbaseException (1030818)

  So far, we have made

  We have removed the ssl configuration by running the Configurator

  Reconfigure the web server

  Reconfigure the web server to the logical address

  Without success. Can someone help and advise you on what we should consider now

  Hello

  If you are able to connect to the server of Maxl Essbase.

  1. I suggest you to take a look at the Source of data for planning application. Since it is an Active/Passive with SSL configuration URL would now

  http://host: port/aps/Essbase? NOMCLUSTER = cluster_name

  Note: ssl = true is removed at the end

  2.

  Change of the APS resolve URLS in the file essbase.cfg. Delete "https" and replace it with 'http' (Ref: https://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?apsresolver.html )

  3. Regional service Console problem

  You may need to cancel some things

  a. download jnlp and change the URL, remove port 443 and https. Change it accordingly to http and the port of SST (def 19000). Save and open again.

  b. in the Weblogic administration Console, you must disable "Enable the Plugin" some option like this that allow us once the SSL configuration for Regional service

  Thank you

  Anjum Ara

• Hyperion Planning support for browsers and Windows

  Hello everyone

  I have a question about browsers and Windows that support Hyperion planning.

  Hyperion is compatible with Windows 10?

  Hyperion is compatible with IE 11?

  Hyperion is compatible with Firefox (latest version) 43

  SmartView is heading the bureau 13?
  

  
  

  Thanks in advance.

  
  

  Concerning

  MSA
  

  You will need to provide what version of Hyperion (and Smart View) you are on for people to answer this question precisely as each version is different.

  Your best bet (and should always be your first choice in these issues) is to consult the EPM support matrix

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

• I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  Connect to the application, go to administration, application, manage applications, select the app, the actions and the initialization.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hi Im trying to switch plans but anyway I'm stuck inside a blank page in my adobe account. Oh I live in South Africa I limited the speed of the line and I think I ran... Any help?, Hi Im trying to change the plans but anyway I'm stuck inside some bl

  Hi Im trying to switch plans but anyway I'm stuck inside a blank page in my adobe account. Oh I live in South Africa I limited the speed of the line and I think I ran... Any help?, Hi Im trying to change the plans but anyway I'm stuck inside a blank page in my adobe account. Oh I live in South Africa I limited the speed of the line and I think I ran... Any help?

  Hello

  Please consult phone support | Orders, returns of trade

  Hope this helps!

• Strange question: Hyperion Planning Forms becomes read-only and data are destroyed: 11.1.2.2

  Hello

  Let me start by saying that I am not new to Hyperion Planning. We encounter a weird problem in our Test System. We notice that some (NOT ALL) of our tour of webforms in readonly webforms. all the cells in the gray form. It comes to despite the fact that the read-only checkbox is not checked in the form as well as the security is fine on all dimensions; Basically, all the cells of the form are valid combinations.

  The form becomes readonly, and all the data on this form is always Wiped. This has happened only for two web forms so far. We took a lot of Calc (none of the Calc have cleardata command). We do not know why this is happening. Maybe it's a bug in the product... not sure. has anyone seen this behavior before?

  Please let me know.

  -

  PK

  Please skip this question. It happened because someone on my team had added a member under umbrella of level 0.

• Unable to open the form and dimension on Hyperion Planning

  Hello
  
  I'm working on Hyperion version 11.1.1.3 on my customer environment (Microsoft Windows Server 2003).
  There are two servers: one is at the database and essbase, the other is for the reporting, the Foundation and planning.
  
  Since a month ago this customer experiences this problem:
  When connect via admin user to Hyperion Planning (19000 and 8300 port can both be used), the menu on the upper part is loaded but the rest are empty.
  I tried to open the form by using the menu on the left, but also does not work, always empty. I also managed to try to open the dimension, it cannot be loaded
  restarted the service, and the server also, but does not work as well.
  
  NB: this error occurs only on the id of the admin, I tried to create another user account and give the same provision with admin, id works well, no problems and no case empty.
  
  could someone please advice what happened and the solution, I give my thanks to you.

  You are looking in the system of planning practice, take a look at the diagram of the planning application.

  See you soon... !!
  Rahul S.

• Hyperion Planning and Smartview: build the function Description HS

  Hi all
  
  I am currently using Hyperion planning 11.1.2.2, I want to display in excel of the ad-hoc reports description of some members of the dimension through smartview.
  To this end, I used the feature to "build the function:
  I selected an empty cell and call the feature, a window appears with two parameters:
  
  1-connection: this field is filled in automatically (WSFN |) HP | PC | Planning | Plane1)
  2 - members list: I want to wire it manually ex: '#100 account '.
  
  I click on validate: the following message appears: selected connection does not support this new function.select connection.
  
  I would like to know what is meant by connection? What is the syntax of the connection string? could you please give an example?
  
  Thank you
  Best regards.
  Toufik
  
  Published by: user11081975 on May 12, 2013 12:55

  Hsdescription is not supported by connection of planning.

  You can use it with Essbase connection.

  Read http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s15.html

  He talks about what are connections shared and private.

  Concerning

  Celvin
  http://www.orahyplabs.com