Hyperion Planning evaluation order of Dimensions

Similar Questions

• Hyperion Planning and Essbase

  I have a question about how essbase is related to hyperion planning.  specifically, I would like to know if you can vectorize in essbase and then associate them with or have them cross to a hyperion planning an application.  I read that if you make a change to an essbase outline, and then refresh the hyperion application applications settings, including an outline, will be replaced.  It seems that master control is integrated with EPMA or hyperion planning because all the dimension and the main lines of work needs to be done here.  However, it seems to me that there may be times where you want everything works on and change the contour in essabase and have changes go through the application of EPMA, because it's maybe easier.  Is this true and if so, how do the changes so that they appear in the hyperion application that was created by EPMA.

  The flow is planning for Essbase, it cannot be reversed.

  If it's a planning request EPMA then the stream is EPMA > planning > Essbase

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hyperion Planning command utility charge - members of the order

  Hello friends,

  We have recently upgraded to Hyperion Planning (pubic sector planning and budgeting) 11.1.2.3 and begin to use the contour load utility to update the attributes of some members of a dimension.  The utility does not work as expected and the attributes are updated to the new values.  However, it seems an unexpected consequence of this, the order of the members is going on in the sketch?  Members remain under the same parent, but go further in the list of members under this parent.

  Is anyone else noticing this?  If so, any ideas on how to update a lot of attributes without moving positions members within the outlines?

  We are loading a file .txt with only two headings: (1) the dimension that we are loading (2) the attribute name, we update.  I was told that I have no need to include the Parent only the Dimension must be defined in the header.  Example:

  Position, STATUS of PN

  01614, STATUS OF PN: I

  04989, PN STATUS: HAS

  05933, STATUS OF PN: P

  04637, STATE OF PN: P

  Any help is greatly appreciated!

  Kind regards

  Summer

  You can use SortMember.cmd to sort the members after construction.

  Concerning

  Celvin

• I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  Connect to the application, go to administration, application, manage applications, select the app, the actions and the initialization.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to customize the period dimension in Hyperion Planning

  Hi guru

  We use the Hyperion Planning 11.1.2.2

  
  We have a requirement to customize the time dimension as follows,

  -Period

  -HalfYear1

  -Q1

  -Q2

  -HalfYear2

  -Q3

  -Q4

  How to add the first half in the Dimension of the time... Please help me with this...

  Thank you

  P1-click and click on 'Add summary period' and give it in Q1. Next, click on Q1 and click on 'Add summary period' and give HY1... The same for the 2nd quarter, HY2 etc.

  If you still facing problem, what you see in period Dimension. Expand all and give the member names.

  Thank you

  Amith

• Hyperion Planning 11.1.2.1 Custom Types Dimensions/Plan

  I was hoping to get some expertise on an issue I have with Hyperion Planning. We are currently working on the 11.1.2.1 environment and we have 2 types of active plan implemented;

  Plan Type A - dimension of active channel (Custom)

  Plan B - channel (Custom) inactive dimension Type

  For the channel size, is it possible to transform the Plan Type B as a valid plan type in 11.1.2.1? I didn't know if it could only be configured on the creation of the application or not.

  If we activate the dimension for the type of plan, I understand this will cause a number of issues, for example to set the POV for all Web/reports/Scripts for Plan Type b Forms. We are just assessment of the impact, have previously, anyone had any experience of this?

  Thank you very much for your help!

  For the application of EPMA you doing the same thing of EPMA, change the properties of dimension and deploy the application, here is the link:

  Changing property values

  See you soon... !!

  Rahul S.

• Hyperion Planning Dimension building techniques

  
  Hello

  I am currently working on Hyperion Planning 11.1.2.1.

  I am interested to know the size of construction planning.

  1. What size technical construction available for Hyperion Planning 11 other than DRM, FDM and technical manual?

  2. I read in a blog this load utility contour doesnot work with Hyperion 11 x for dimesion building and "Hyperion Dimesion Library" is available in its place. Is this true?

  But we use the contour load utility to load exchange rates in our 11 version application.

  3. I worked on the ODI 10 g and 11 g with Hyperion 9 x

  Hyperion provides 11 compatible x in dimensions of building using ODI from scratch and also adding members to an existing hierarchy according to the evolution of the business?

  Thank you!!

  Methods - outlineload utility, ODI, Interface Tables, file of ADS.

  the outlineload utility is for Classic applications for metadata loading.

  Yes, ODI is compatible.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Organize records form in hyperion planning by alphabetical order

  Is it possible to organize the files form hyperion planning in alphabetical order? We can, and we can't if it's the only way, sort the folder names in relational tables in backend?

  Or is there a way to the web planning to do the same?

  I would like to know if there is a second option that I may be adding new files periodically and it will re - arrange files alphabetically each time.

  
  Thank you

  Pawan.

  I can suggest a way. Planning takes the order in which you create files in a specific folder.

  So, either you create a new folder in the order you want even under your existing folder name (give some suffix at the end). Delete the old files and rename them again.

  (GOLD)

  You can try to move/rearragning under a new folder. I don't remember if it worked for me. I have a very bad memory

  Amarnath

  http://Amarnath-Essbase-blog.blogspot.com

• Unable to open the form and dimension on Hyperion Planning

  Hello
  
  I'm working on Hyperion version 11.1.1.3 on my customer environment (Microsoft Windows Server 2003).
  There are two servers: one is at the database and essbase, the other is for the reporting, the Foundation and planning.
  
  Since a month ago this customer experiences this problem:
  When connect via admin user to Hyperion Planning (19000 and 8300 port can both be used), the menu on the upper part is loaded but the rest are empty.
  I tried to open the form by using the menu on the left, but also does not work, always empty. I also managed to try to open the dimension, it cannot be loaded
  restarted the service, and the server also, but does not work as well.
  
  NB: this error occurs only on the id of the admin, I tried to create another user account and give the same provision with admin, id works well, no problems and no case empty.
  
  could someone please advice what happened and the solution, I give my thanks to you.

  You are looking in the system of planning practice, take a look at the diagram of the planning application.

  See you soon... !!
  Rahul S.

• ODI to load dimensions in the Application classic Hyperion Planning 11.1.2.1

  Hello
  
  I tried to load some dimensions in Hyperion Planning 11.1.2.1 Classic Application using ODI 11 g.
  
  The problem, just the other side is
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 23, < module >
  at com.hyperion.odi.planning.ODIPlanningWriter.validateColumns (unknown Source)
  
  at com.hyperion.odi.planning.ODIPlanningWriter.loadData (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: the source result set contains the column [C1_ACCOUNT] that has no corresponding column on the side of planning.
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  
  This is the code that returns the error
  
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.connection import HypAppConnectionFactory
  import java.lang class
  import java.lang Boolean
  import java.sql *.
  from java.util import HashMap
  #
  # Get the select statement in the meeting area:
  #
  SQL = "" "select C1_ACCOUNT 'Account', 'Parent' C2_PARENT, C3_ALIAS__DEFAULT ' Alias: Default ', 'Memory' C4_DATA_STORAGE, C5_AGGREGATION__PLAN1_"(Plan1) aggregation"of" C$ _0Account "where (1 = 1) '"
  
  srcCx = odiRef.getJDBCConnection ("SRC")
  
  stmt = srcCx.createStatement)
  
  srcFetchSize = 30
  
  stmt.setFetchSize (srcFetchSize)
  
  RS = stmt.executeQuery (sql)
  
  #load data
  stats = pWriter.loadData (rs)
  
  #close the database result set, connection
  RS. Close()
  stmt. Close()
  
  I created 2 models in my designer:
  
  HYPERION_MODEL_TEST and ORACLE_SQL_SOURCE, the first has the reverse engineering dimensions ranging from planning and the other is to get the table that contains the members of my size. For the staging area, the synopsis in memory DB is used.
  
  LKM SQL for SQL and SQL IKM in Hyperion Planning is used.
  
  In the interface, I take the source table and the dimension of planning as a target I map the Parent, Alias account: by default, the data storage and ownership of aggregation (Plan1) of the target of the GBA in my dimension table.
  
  All be saved well and when I run it I get the error, clues?
  
  Cheers, Sandi

  First of all there is no interest in using the memory storage engine as the staging area if Oracle is your source, you can also use Oracle as the transit area, the staging area probably will not be used as usual a straight SQL query will be generated.
  In your target mappings have also tried setting "run on the staging.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Construction of dimension with a rules file for Hyperion Planning

  Hello Experts!
  
  I'm on version 11.1.1.3. I created a classic with 3 Hyperion Planning application plan types, and in EA I have successfully downloaded the same members of dimension entity with the same rules file in each of the 3 contours under my application from HP. Then I've also updated database in the Planning, but I don't see any new dimension member in HP. - could someone help me with what is wrong? Hyperion Planning of work with files of rules for dimension is not build? Thanks in advance!

  No planning does not work with the rule files, you must load dimensions information directly in the planning, and then push it to essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Tabs vs dimension Performance evaluation order

  Hi all
  
  What is the difference between the order of evaluation of performance parameters vs? All I know is that if we define the hourglass / hour glass on stick to change the order of the dimensions in the parameters of Performance tab.
  
  Any information will be very useful.
  
  Thank you
  
  AD

  Hello

  The performance parameters set if the dimension is dense or sparse and the order in which they are placed in the outline.

  The evaluation order defines how all to be assessed on a form, for example if you have a defined member account as a data type of text and you want it to appear as text on the form and then you define account to evaluate.
  If you have other dimensions with different data types, you must set the order of evaluation based on how you want to display in the form.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• OutlineLoad utility not only loading text or dates in Hyperion Planning

  Good afternoon

  I tried several times to use the Outlineload utility to load the text and dates in an unsuccessful planning application. I use the Version of EPM: 11.1.2.1. Here are the steps I took:

  1. in EPMA, created a new Member, CommentsText, under the accounts dimension and all its data type 'Text' and then deployed the application.

  2. has created the following source file:

  Pilot Member, value, perspective, loading data Cube name

  CommentsText, go to my comments, here, ' Jan, FY10, USD, real, Final, C101 ", BUD_IS

  While preparing the source file, I made sure all the dimensions were represented by one member at the lower level.

  3. I ran the command below to the DOS command line:

  OutlineLoad S:Localhost A:PLN_GAL /U:admdem / m /I:d:\temp\loadtext5.csv /TR /L:d:\temp\Outlineload-log.log /X:d:\temp\Outlineload-exceptions.exc

  See the command to run successfully. This is what the log file:

  [Thu Sep 26 19:16:36 CDT 2013] Input file located and opened successfully "d:\temp\loadtext5.csv".

  [Thu Sep 26 19:16:36 CDT 2013] Record header fields: pilot Member, value, perspective, loading data Cube name

  [Thu Sep 26 19:16:36 CDT 2013] Finds and uses the 'OFADataLoadDimension' size for loading the data in the application 'PLN_GAL '.

  [Thu Sep 26 19:16:36 CDT 2013] The parent-child command option (switch/h) will not be performed: this option is not available for the dimension "OFADataLoadDimension."

  [Thu Sep 26 19:16:36 CDT 2013] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension "OFADataLoadDimension."

  [Thu Sep 26 19:16:38 CDT 2013] A refresh of the cube operation will not be run.

  [Thu Sep 26 19:16:38 CDT 2013] Create filters for safe operation will not be performed.

  [Thu Sep 26 19:16:38 CDT 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.

  [Thu Sep 26 19:16:38 CDT 2013] Planning of vector data store finished loading processes. 1 data record has been read 1 record of data have been processed, 1 has been loaded successfully, 0 is rejected.

  But even if the log indicates that the comments were written, no text is written!

  Two possible problems, I've noticed are:

  1. the logs says: "located and using"OFADataLoadDimension"dimension for the loading of data into the application"PLN_GAL" I don't know what can be the dimension "OFADataLoadDimension."

  2 even if I put the text in EPMA data type, the data type is NUMERIC - NOT TEXT and more once I have deploy the application and check with the console service Regional. This blows my mind. I don't know why this is happening.

  Can someone please help? I tried A to Z for 2 days without success.

  Thank you!

  Luis

  I suppose that you have set the order of evaluation in EPMA - Parameter Data Type evaluation order

  To be honest that I have not used the utility outlineload to load the data when planning is EPMA mode, only in classic mode, in theory, it should work as it isn't metadata and data but not something that I tested.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Evaluation order of setting using the Table of Interface EPMA

  Hello everyone,
  the new post is to share with you a question EMP architect that I don't know how to fix.
  I use table Interface to load several dims on my App. planning and before you deploy it to the EPMA, I check my Dim evaluation order. My choice is very simple: the only Sun crept toward the right the order property of the assessment panel is my Sun account.
  After validation and delpoyment of my App on EPMA (both successful), I noticed that the order of evaluation on the planning app is not the same: no sun is evaluated (empty can on the right panel).
  This problem has upset my forms because I can't use SmartList or percentage account, for example.
  Could someone help me?
  
  Thanks in advance
  
  Stefano

  Hello

  Last Planning patch - Patch 8527948: Hyperion Planning - System 9 Release 9.3.1.1.11 Service difficulty
  You have all the listed patches EPMA 9.3.1 and should install all.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Load data into Hyperion Planning problem with police? Thai tank.

  Hello
  
  Can someone help me I just load the ODI in Hyperion Planning data; However, it has char Thai in my data. When I see data in Hyperion Planning, char Thai converts? instead. So, how can I load data without problem of tank with ODI fonts? Any expert! Please help me for this
  
  
  
  < img src = "http://img10.imageshack.us/img10/6087/20090316155228.th.png" border = "0" alt = "Free Image Hosting at the www.ImageShack.us" / >
  
  < img src = "http://imageshack.us/img/butansn.png" alt = "QuickPost" border = "0" > QuickPost this image to Myspace, Digg, Facebook, and others!
  
  In Journal of Hyperion, there is no error here
  
  2009-03-16 15:14:47, 847 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2009-03-16 15:14:47, 847 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
  2009-03-16 15:14:47, 925 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
  2009-03-16 15:14:47, 941 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
  Name of the dimension: location like Parent child: true
  Order By entry load: true
  Update the database: false
  2009-03-16 15:14:48, 019 INFO [DwgCmdExecutionThread]: beginning of the loading process.
  2009-03-16 15:14:48, 019 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
  2009-03-16 15:14:48, 066 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
  2009-03-16 15:14:48, 285 INFO [DwgCmdExecutionThread]: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
  2009-03-16 15:15:14, 660 INFO [DwgCmdExecutionThread]: load the process is complete.
  2009-03-16 15:27:45, 821 [DwgCmdExecutionThread] INFO: Oracle Data Integrator adapter for Hyperion Planning - free 9.3.1.1
  2009-03-16 15:27:45, 821 INFO [DwgCmdExecutionThread]: connection to the planning application [Budget] on [192.168.3.20]: [11333] using [hypadmin] username.
  2009-03-16 15:27:45, 883 [DwgCmdExecutionThread] INFO: successfully connected to the planning application.
  2009-03-16 15:27:45, 899 INFO [DwgCmdExecutionThread]: loading for the charge of planning options
  Name of the dimension: location like Parent child: true
  Order By entry load: true
  Update the database: true
  2009-03-16 15:27:45, 962 INFO [DwgCmdExecutionThread]: beginning of the loading process.
  2009-03-16 15:27:45, 962 DEBUG [DwgCmdExecutionThread]: number of columns in the result set of source does not match the number of columns planning targets.
  2009-03-16 15:27:45, 993 [DwgCmdExecutionThread] INFO: type of load is a [member of the load dimension].
  2009-03-16 15:27:46, 165 [DwgCmdExecutionThread] INFO: circular reference detected Possible, abandonment of sort and continuing with load. 1368 possible circular reference documents found.
  2009-03-16 15:28:14, 540 [DwgCmdExecutionThread] INFO: planing cube refresh initiated.
  2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: planning of the cube refresh operation completed successfully.
  2009-03-16 15:28:22, 993 INFO [DwgCmdExecutionThread]: load the process is complete.

  Hello

  I'm glad you find the blog useful.

  I understand that you use 9.3 and to prove that it is not a question of ODI, log into planning from the web, add one manually with thai characters, then refresh the application to push information to essbase, then look at the Member in EA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/