Why a network access point disappears suddenly?

Similar Questions

• Why my itunes wish list disappears suddenly?

  As I was reviewing some of the albums in my itunes wish list.  He suddenly disappeared.  I tried

  restarting the computer but no luck.  I do not get one "you have added music to your wish list.

  Message.

  Any ideas?

  This also happened to me. Anyone know what to do?

• Unknown home network access point that I don't create

  I recently updated my modem on a new one that has a built-in wireless router (I have cable internet) I don't know if that has anything to do with this problem, but now when I open "Network and sharing Center", I noticed that my home network name was no longer "an Internet 3" but something named "RubyCheetah" - a name * I * certainly didn't put in there!  I wonder now if I joined in some kind of home network of someone by mistake and I'm now internet access through its network. I live in an apartment building where I think there are a LOT of wireless spots. Would this be possible? Earlier, I was getting very sporadic bouts with pages not loading or taking always into the for do.

  What I want to do is to delete this "RubyCheetah" completely and start again with another, as if I was installing Windows for the first time and create a home network. How can I do this?  Help, please?

  Running Windows 7 64 bit

  Hi Stewart,

  If you want to remove a connection, just go in your nail connections network the connection in question and press on delete. You will be prompted to confirm, do it.

  Then click on "set up a new connection" follow-up steps.

  Now, if it does not find your connection, it is a different matter.

  If this happens, connect the router via an Ethernet cable and see if you can connect

  Let us know what happens

  B Eddie

• Access points dropping from top to bottom

  I have anywhere from 5 to 20 points of access drop goes up and down all day on a total of about 200. I try currently to cross and understand why we our access points are conducting many issues and how I might be able to solve.

  One of the newspapers I see often is:

  AP "exp - p13,' interface '802. ' 11A ' controller ' 10.2.192.25 '. String passed to ' 44 ""60"due to 'None '. Energy interference before update is ' 0 'and after update is ' 0'. Noise before update is ' 0 'and after that update is ' 0'. Interference before update is ' 0 'and after update is ' 0'.

  Is any way to determine what the cause of this?

  The controller firmware: 4.2.130.0.

  Model AP-AIR-LAP1242AG-A-K9

  IOS Version 12.4 (10B) JA4

  Sounds as if it was just the Radio Resource Management (RRM) on the controller. You can disable this if she is down to customers. Go to the wireless tab, look on the left and click on the 802. 11A / n or 802.11b/g/n dropdown. Then click on the drop down RRM, click Auto RF.

  My advice is to change the algorithms of subpoena power and channel to "On Demand. You can call them to the need to maintain an optimal network. By default, it automatically calls the update every 10 minutes.

  Give it a try and see if it helps. If this isn't the case, we can explore more.

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• PS B110a - wireless configuration will fail if the network has multiple access points

  Photosmart B110a (CN245B) wireless AIO printer.

  I have several wireless access points using the same SSID to provide coverage over a large area. When you install the printer on the screen TouchSmart wireless installation fails. Print report reveals the following error:

  "More than one access point/router wireless was found which matches your network name (SSID). If this is not intended, your HP printer can connect to the wrong network. »

  In my case this IS planned but there seem to be no available option to answer "OK, just connect to any point of access by using my SSID.  If I turn off all but one the APs configuration complete OK. If I have to do every time I turn on the printer the printer is USELESS for me.

  Did I miss something?

  sijomi

  This should not be a problem.  I have a B110 (and another 10 or so HP wireless printers) on a network of airports with 5 access points and they just connect.

  Here are a few suggestions:

  1. don't use WEP - use WPA or WPA2 with a 13 + character password.

  2. enable the SSID broadcast on all access points

  3. do not use the MAC filtering acddress

  4. make sure "AP isolation" or "isolated wireless" is disabled.

  5. make sure that you are not on a private network, virtual, or connected to your network of comments.

  6. If different strings on access points do not work, try the same channel.

• How to install a HP printer wireless network using an Access Point in Windows 7

  
  

  Let me know if you have any questions or need help to install a HP printer wireless network using an Access Point in Windows 7.

• Set up home network of multi access point

  Recently, I cut the string so to speak with directv and is passed to a streaming cable through view PlayStation. However this left me with a little slower network I want to. I have a 3-storey house in a crowded area and my cable modem is on the lower floor.

  Currently, I have a linksys ea3500 connected to a modem cable in the basement. I have a family room on floor 2, where I connected PlayStation. On the third floor, I have a Roku in the bedroom for live tv broadcast and also a Home Office.

  I can work around 70mbps down when connected via Ethernet to the ea3500 on the ground floor, but a signal wirelessly on the second floor is about 25mbps down and falls to 15 or so away on the third floor.

  I ordered a new router (wrt 1900ACS) and also a netgear powerline 1200 kit. My plan is to connect the line adaptor to the ea3500 and place another line on two ground adapter. To which I would link the wrt 1900 and run as an access point for the existing network. I would also link the PlayStation to the wrt1900 through cat 5 to improve the reliability of the connection.

  My hope is that this will greatly increase my speed of download available in the House. We are connected fairy and at any time have probably 10 to 15 devices (tablets, phones, laptops, TVs, desktop, nest, etc.)

  Given my current gear (and the warning that I won't have to run wires through the wall or through the vents) is the configuration I describe the best way to increase the signal strength and bandwidth bandwidth/speed? Does it matter if I use the new wrt 1900acs as a slave to the ea3500, since it will be connected via the power line to the ea3500 lan port? Should I just unplug the ea3500 and only use the 1900acs on the Middle floor and connect the power supply line direct adapter to the cable modem?

  Any idea to my plan or recommended changes to my plan would be appreciated!

  It's good then let the EA3500 and add the WRT1900ACS in via PowerLine Bridge Mode.

• Print Epson printer States: a router/access point channel conflict detected - improve your wireless network environment?

  I try to print from my laptop on my Epson printer.  It will not work on any of the documents or the internet.  The Epson prints what follows: a conflict of channel router/access point - improve your wireless network environment, has been detected.  My router is sitting next to my printer and the laptop.  The Green WiFi light on the front of the printer is on.  I have no problem using my Ipad in the other room.  So does mean printing?

  It's that all the documents, both new & saved and the same Wordpad?

  Maybe

  http://support.Epson.ru/products/manuals/102044/Panel/g_html/external/manual_e01.htm

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.