I am tring to connect with my PLC S7-1200 but it gives error of Protocol.

Similar Questions

• HP all-in - One Photoshop C6280: Scanner tring to connect with C6280 all-in - One Photoshop crashes w/task and not complete

  I had already used my scanner and it worked very well on a wireless set up.  Now, when I went to click scan again, a little box came and said, ' establish a connection with 6200.192.168.9.2 and it just hangs it and does no connection.»  I have forcibly close Microsoft fax and scan program manager tasks.   I closed my PC printer and modem wireless disconnected and reconnected since and all lit again.  My wireless phone and seems to work very well as I can get on the internet, etc., but the attempt at analysis of a new document yeilds the same results as previously with the application tries to establish a connection and just hanging there.  I used my HP scan and print doctor and everything is fine with my legacy, with the exception of the low ink level.   My drivers are up to date analysis of my HP PC.  Help, please.  What to do next?

  Hi @Zippy-4,.

  Thank you for joining the HP Forums!

  I understand that you cannot analyze with your HP Photosmart c6280 printer. I'm happy to help you in your analysis!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  For now, try the steps in troubleshooting in this guide, Network Scanner connection is lost (Windows)and let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• I am connected with the nearby ethernet cable but I can't connect to the network.

  I connected with the surroundings but ICAN t ethernet cable get internet

  Hello

  1. what operating system is installed on your computer?
  2. What is the error message when you try to connect to the Internet?
  3. don't you make changes to your computer before the problem?

  Search for related errors in the event viewer.

  Follow the steps in this article if you are using Windows 7.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Not able to connect to MWAGUI. Telnet works, but MWAGUI in error "the connection failed". Help, please...

  Not able to connect to MWAGUI

  Telnet works, but MWAGUI giving the error "connection failed". Help, please...

  We bounced back the application and services many times MWA. Also, we have disabled enabled several port but no solution yet.

  There are 3 work of the plates for MWA GUI on the Windows Machine.

  Patch # 12574324 for 11i

  Patch # 12780257 for 11i

  Patch # 20983924 for R12

  All these patches work on Windows 7 and 8, with all versions of Java.

  The first two patches for 11i work on R12 also but with a minor problem. When you press tab even though visually the cursor moves to the next field, but in reality, it remains in the previous filed and what you enter is taken as a stream in the previous field. The replacement of the tab in the first two tasks is .

  To solve this problem the 3rd patch was created, which is the latest patch to work for R12 too but this patch after a few ORS and Patch requests (other modules) does not work anymore and gives the error "unable to connect". The first two patches can be used s a solution until a new patch coming to replace 20983924.

  Please note that CMD/batch of all three patches files is performed differently, so follow the guideline strictly for the respective patch.

  Kind regards

  Pierre Paul

• iMac hangs after connecting with the interminable spinning beachball, but works in safe mode.

  Plug

  iMac 27 "(mid-2010) running Os X El Capitan 10.11.4"

  Processor: 3.2 GHz Intel Core i3

  Memory: 16 GB at 1333 MHz DDR3

  Problem

  With a normal startup, iMac will start properly and I can successfully connect. Once connected, I immediately get a popup window stating "To open"CS5ServiceManager", you need to install the runtime Java SE 6 legacy." I have the opportunity to click on 'Détails' or 'OK', if I click on what anyone, I immediately get the spinning beachball. I'm sure that he ran the updates at night, because the next morning was when problems began to occur.

  With a sure start, I can connect properly, everything is and I can open applications, it's just very slow.

  What I have done (in no particular order)

  1 Ran first aid utility disk

  2 reinstalled OS X El Capitan

  3 reset the NVRAM

  4. the elements of disabled opening (Dropbox and Google Drive)

  4 Ran correctly in Safe Mode, but when I rebooted the problem still occurred.

  Recently I also upgraded my RAM from 8 GB to 16 GB, it has greatly improved the performance of the machine, and I don't have any problems so far.

  I'm almost to the point of wiping the device to its factory settings, because it is so frustrating me. I really don't store anything on site, everything is in the cloud, or on an external hard drive.

  Flora-flora,

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• I made a Web site, and the domain name is tschantre with this special e (colleague). but it gives me an error, how can I handle this?

  How can I manipulate can I gibe the domain name with the e - any code? or something else?

  Could you please confirm, you get the error message and either when adding domain in the file > export to HTML or file > download on FTP host option or if there is another place, you are referring to?

  I checked and the export and download of FTP options both accept accented characters in the domain name field.

  See you soon,.

  Vikas

• Connect with sqlplus tnsname alias thorugh his gel

  10 gr 2 oracle 10.2 on Windows Server 2003 R2, the database database worked for awhile now and not specific changed have been made but now I try to access the database via sqlplus may not connect with all valid users, and I have ne error message, it seems that the database cannot connect to sqlplus via a tns alias name it freezes and even local connection working

  How to solve these problems

  All very much appreciated

  Thank you

  While ensuring services for oracle and listener, I found that oracle service has been run with a domain user account so that the listener is running in the local system user account.

  When we also changed the user domain account auditor account, then restarted the listener, we have seen labour NETCA. The connection to the base through TNS works also.

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?

• W7 64 bit VMWare View client do not connect with VDI

  Hi guys, I installed the x 64 client vmware view on a W7, and I'm not trying to connect to a VDI from him. When I try to open the connection with the view server I have the following error

  "vmware client view server returned an invalid or unrecognized response".

  I took a quick glance to vmware \AppData\Local\VMware\VDM\log files and I saw the following error codes

  2012-12-27 09:43:58, 936 DEBUG < MessageFrameWorkDispatch > [wswc_http] ErrorCode WININET is 12152

  Anyone know why this error occurs for the 64-bit client?

  Thanks in advance

  Hello..

  Yes! You can.

  This is for you - compatibility matrix

  http://pubs.VMware.com/view-50/index.jsp?topic=/com.VMware.view.upgrade.doc/GUID-E9BB81A4-1054-4BBB-A43B-CB60A6EF909E.html

  Concerning

  Faisal

• Open a session with the status of administrator but windows update denies - 0x8ddd0002 error

  I connect with the status of administrator, but windows update said I am not an administrator and refuse updates.

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned in the link checking if this is useful:

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/316524

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps.

   

• How to connect Labview to PLC Modicon Quantum (140 CPU 311 10) with Modbus

  I was wondering if someone could give some tips on how to connect Labview to Modicon Quantum plc (the card is 140 CPU 10 311).  I am eager to serve a Labview HMI to control the controller that is used to implement the control PID with a VFD.  Currently I can communicate via Modbus to the API for programming using UnityPro XL, but I have no idea how to connect Labview.  I read the article on place OR "connect Labview to any PLC via Modbus", but I don't know yet.  Any help will be greatly appreciated.

  Hey Greener.

  Communicate with the PLC via Modbus usually requires the Datalogging and Supervisory Control (DSC) Module to have this feature available in LabVIEW. The white paper which indicated you using this module, which may explain why you can't get the communication at work. If this is something you don't have, and purchasing a license is not an option, then you might be able to use Modbus unofficial libraries to get the functionality you need. I have included a link below to a Modbus for LabVIEW library that you can try.

  DSC module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209851

  Modbus Library:

  http://www.NI.com/example/29756/en/

  Kind regards

  Ryan

• connect LabVIEW to PLC

  Hello

  I try to connect LabVIEW to controller using an OPC server of NOR. Its a controller logix (Allen Bradley) L23E Compact and I find it difficult to obtain the device driver. Please help me with this topic and a link explaining how it would be useful to connect labVIEW to PLC.

  Thanks in advance,

  Sunil

  Hi Sunil,

  
  

  Regarding the driver:  See the taken list supported device & driver plug-in for NOR-OPC Server

  Regard to the connection in LabVIEW:  You have two main options that depend on the question of whether or not you have the LabVIEW DSC Module.  As seen here, you can either use variables shared with DSC to access your OPC tags, or you can simply use DataSocket VIs contact them directly as an OPC client.  Some documents that may be useful by adding your specific hardware can be found here and here.

  I hope this helps!

  -Greg J

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support