I am trying to burn a dvd folder in again, on a dvd on another mac equipped with a dvd burner...

Similar Questions

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I tried to burn a DVD or a Blu - ray on Final Cut Pro 10.2.2

  I tried to burn a DVD on Final Cut Pro 10.2.2 but I find that it always stop the process of engraving in different times. I try a different project on different Macs, some works of time but most of the time stops processing in order to burn! any suggestion?

  Sometimes to replace the image of the menu with a version resized, smaller (height 480) solves this problem.

  Russ

• I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd

  I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd and that's all what he'll do it just ejects and the session is over

  Hi Barbara,

  You can use the player to burn a mixture of songs from the library of the drive or your computer to an audio CD, after which you can play the CD in any standard CD player. Alternatively, you can burn files on CD and DVD data. It is not possible to burn the live streams, such as radio stations, on a CD or a DVD.

  Follow the steps in the link below.

  Burn a CD or DVD in Windows Media Player: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I burned some media files on a DVD-R. However when I tried to burn another point, I have a display message asking me to format the drive.

  I have vista Home premium with IE9. I burned some media files on a dvd - r. However when I tried to burn another point, I have a display message asking me to format the drive. I do not understand what that the drive has been formatted. I know from a previous answer that I format the disk, then all the content wil be removed and so I don't want to do. But how do I continue to burn items on the disc. I know everyone is busy here, but I hope someone finds the time to answer. Thank you for being useful to me recently. sincere love to all,

  original title: reformatting a dvd - d

  Did you close (or complete) of the DVD when burn you first your files on it? If you do not email us any more data on DVD-R, you will need to use a second DVD-R disc.

• I'm trying to burn images in format .jpg on a cd or a dvd in my dvd player. burn files on the disk, but will not work in drive

  I'm trying to burn images in format .jpg on a cd or a dvd in my dvd player.  The files to burn to the disc but won't play in dvd player

  It is possible that your DVD Player cannot read the format. Have you tried Windows DVD Maker? The application must be able to encode the DVD properly in order to perform almost any DVD player worldwide. Thanks, Callum Kerr.

  My software site
  Xbox Live Gamertag: callum151000

• When you use "corel video studio pro X 3" and I'm trying to burn a video to a dvd I get a message error "program stopped working" "»

  My computer has vista and when you try to burn a dvd using the video editing software "corel video studio pro x 3" I get a message error "program stopped working" with the details below; "."

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: BurningApp.exe
  Application version: 1.0.0.50
  Application timestamp: 4ba12d57
  Fault Module name: ulaacdec.dll
  Fault Module Version: 2.0.0.4
  Timestamp of Module error: 4ba13562
  Exception code: c0000005
  Exception offset: 0000cc79
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 3081
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Please help, it makes me crazy!

  Hi dmoz74,
   
  1. have you tried to burn the DVD using any other program?
   
  We recommend first to restore the Corel Video Studio to its default settings and check the result. To restore the factory settings, see this article to restore the settings
  If the problem persists, we recommend to uninstall Corel video burning software, and reinstall it correctly.
   
  For additional assistance, please contact to Corel support team
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• error 2615 while trying to make a dvd from a video podcast

  trying to make a dvd from a video podcast, I tells me unable to complete a task error 2615?

  You posted on a forum for users of Microsoft Security Essentials.

  You have a hardware problem or software. Check with the manufacturer of your PC or your manufacturer of DVD or your software for additional DVD burning support.

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• I noticed that when I tried to clean my dvd - rw drive d drive was full? How can I clean that upward?

  Original title: my dvd rw drive is full

  I noticed that when I tried to clean my dvd - rw drive d drive was full?   How can I clean that upward?

  "kakbramer" wrote in message News: * e-mail address is removed from the privacy * .com...

  I'm sorry while shouting did not mean too.  Well I use to be able to watch videos and burn and watch TV on internet, now it used to me let burn, and it won't let me watch my DVDs on the pc and internet tv stops constantly.  I had a problem about six months ago, and the computor guy deleted all my files that he said so he could install a new thank you windows

  I know you didn't want to scream... Not to be too critical, but it really looks like you need a new 'computer' man as it is inexcusable to erase data files when you install a new operating system, especially if it does not create a backup disk or files.   Having to reinstall programs is normal, but the data must never be lost.
   
  You apparently have different issues that might be related to malicious software and drivers a bad or hardware problems for your computer.  I recommend that you take a small reputation of the computer "mom & pop" type computer store to have your repairs.  Big box stores, such as Staples, Best Buy, etc. are NOT reputable in computer repair.  Take installation discs you have for the computer, and a good description of what is happening.

• I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

  I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

  Hello

  1. What is the format of the file you want to burn?

  2. what application you use to burn the disc?

  Method 1:

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Method 2:

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

• Im trying to burn a CD, but my drive does not eject if I put a CD

  I am trying to burn a CD and my drive will not eject if I can put a CD to start to burn my music

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: "at least one tracks is protected"when trying to burn some songs CD's favorite original

  Original title: the protected when burning music

  I hope that this question is in the right place.

  I am trying to burn some my tracks favorite original CD in my library on a blank CD, so I have all my favorites on CD one.

  The problem I'm having, is that when I start to the burn, a window appears and says... "that at least one of the tracks is protected"

  Where to look, or go to find that trace is in order to remove it, and then burn the rest?

  Thanks in advance.  :-)

  Hello

  It seems that burning rights are missing for one of the tracks.
  It's ok to burn the tracks. If CD burning rights are missing on the slopes, then you will burn successfully tracks.

  If the song file is protected by the rights of use, these rights may allow for playback of the song on the computer but prohibit burn them on a CD. If the Information button appears next to the song in the burn list, click the button to see more information on the issue. For more information on usage rights, see the DRM: frequently asked questions.

  For more information, see burn a CD or DVD in Windows Media Player: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to burn a video with a vob.ext

  I am trying to burn a video with the vob extension

  I am trying to burn a video with the vob extension

  =======================================
  Are you saying that your source file has a VOB? Or are
  you say you want your completed DVD to VOB files?

  For a better answer... Please post more details.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.