I am trying to burn a video with a vob.ext

Similar Questions

• I am trying to take the video with my Canon EOS 60 d

  I am trying to take the video with my camera.  She saves about 3 seconds and then stops.  the error message is "video recording was stopped automatically."  I have to do something wrong.  Can someone help me?

  What card memory SD brand and 'class' are you using?  Probably the memory card is not fast enough to deal with HD video.   'Class 6' or more recommended.

  More extensive explanation here:
  http://www.tested.com/tech/photography/3317-how-to-buy-the-right-memory-card-for-your-camera-SD-card...

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• Unable to play videos with. VOB extensions on my pc with Windows 7

  I have Windows 7. Have Window Media Player 12? If so, I can't play videos with. VOB extensions. Trying to find an answer that follows was a possible solution via the MS Community answers: go to all programs, WMP, tools, options and drive tab, then select the "codec download automatically in auto updates, but I don't see that when I follow these steps? Seen another article that says to change the. Extension VOB to an mpg? Can you help me to find a better way to fix this? What can I do to be able to play videos with. VOB extensions? Thank you.

  I have Windows 7. Have Window Media Player 12? If so, I can't play videos with. VOB extensions. Trying to find an answer that follows was a possible solution via the MS Community answers: go to all programs, WMP, tools, options and drive tab, then select the "codec download automatically in auto updates, but I don't see that when I follow these steps? Seen another article that says to change the. Extension VOB to an mpg? Can you help me to find a better way to fix this? What can I do to be able to play videos with. VOB extensions? Thank you.

  Download and install VLC Player.

• When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You try to burn a video DVD? If_yes_that is not supported
  by Windows Media Player, try using Windows DVD Maker.

  The following items may be worth a visit:

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When you use "corel video studio pro X 3" and I'm trying to burn a video to a dvd I get a message error "program stopped working" "»

  My computer has vista and when you try to burn a dvd using the video editing software "corel video studio pro x 3" I get a message error "program stopped working" with the details below; "."

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: BurningApp.exe
  Application version: 1.0.0.50
  Application timestamp: 4ba12d57
  Fault Module name: ulaacdec.dll
  Fault Module Version: 2.0.0.4
  Timestamp of Module error: 4ba13562
  Exception code: c0000005
  Exception offset: 0000cc79
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 3081
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Please help, it makes me crazy!

  Hi dmoz74,
   
  1. have you tried to burn the DVD using any other program?
   
  We recommend first to restore the Corel Video Studio to its default settings and check the result. To restore the factory settings, see this article to restore the settings
  If the problem persists, we recommend to uninstall Corel video burning software, and reinstall it correctly.
   
  For additional assistance, please contact to Corel support team
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I am trying to burn a disc with photos - I bought the correct DVD but it does not work

  Try burning the photo gallary dvd - it won't work - I bought the correct dvd - what is the problem

  Try burning the photo gallary dvd - it won't work - I bought the correct dvd - what is the problem

  ====================================
  If your version of Vista has Windows DVD Maker... the
  next article might be worth a visit:

  Windows Vista-
  Creating Windows DVD
  Burn a video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• Receive "not writable disc" when trying to burn videos

  original title: How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  How can I burn slideshows video with dvd - R disc, when he tells me this is not a recordable disc, I was told it's a recordable disc?

  ================================================
  No matter which CD or DVD you purchase in a Virgin package is writable.

  And I'm guessing that you have a DVD burner?

  What program you use to create the slide show?

  The following article might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Burn a CD with Windows Media Player

  I tried to burn a cd with windows media player.  I think that it is version 11.   I put the songs I want to burn on the right side where it says to put them.  I use a cd cd - r Phillips.  He'll burn 3 or 4 songs, and then eject the disc.  I tried several times and it does every time.  Any advice on how to burn the entire list of songs.  There are 15 I wanted to put it on disk.  And it's an 80-minute drive, so there is a lot of time on them.  I lost a few disk already so any advice would be appreciated.

  Thank you

  Rita

  you have to 'turn off' the ' auto eject and auto burn / rip "feature for your cd device.

  in this way the cd will stay "unburn" and can accept more files.  later, when you have copied all the files on the cd, then you can manually run a ' burn / rip.

  try to go to the menu bar of media player file.  then, under Tools > options there should be a tab to customize the "rip" where you can change the ejection and extraction methods.

  regarding as to why you seem to only be able to copy multiple files at the same time, it is probably due to low resources on your system.  Maybe you are low on memory or disk space when you use the media player.

  so, you could try to just use the Explorer to transfer files on the cd.

  You can open the Explorer and then find the folder that contains your music / song files.   then as with any file, you can drag and drop them on the cd or use other methods that you want to copy files from one place to the other.

  also, most computer come with specialized software that is designed for your device to computer and cd model.  This software will be has features to copy files to the cd, and will also have the necessary controls to fine-tune the device cd and windows to play and the extraction of files.

  Finally, it has been my experience that about five years of cd home-made, even if you buy the best cd for recording as those made with layers of gold and those with false promises that they last forever...

  Unlike the cd music that we buy at the store, the method that we have with the computer is not industrial strength and something happens to the layers inside the House made conference that degrade over time.  I have studied this issue carefully and I just to let you know about the phenomena.  (I almost lost some one of a kind songs where the group no longer exists or their albums.  I actually have the only copies of these songs in particular in the world)

  in any case, certainly keep copies of your music on the hard disk. You can also store copies of your music on the site of skydrive from microsoft for free.

• Video with Transparent background

  Hi I am trying to create a video with Adobe first components 10 that has a transparent background.

  I need to be in. FLV. SWF or. MP4 format.

  I created the alpha etc, but I think I'm not export properly.

  Can someone explain the steps for the creation of the video with a transparent background and how to export to these file types please?

  Thank you.

  Welcome to the forum.

  Unfortunately, pre does not support the share of exports in transparency. He also has no transparent video under the new drop-down menu, for synthetic video (like Black Video).

  PrPro done with many flavors of AVI, FLV, but do not remember if it offers Millions + (the + is the Alpha channel) for MP4.

  Sorry,

  Hunt

• Can't burn videos with creation of DVD on a DVD + RW disc

  I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
  I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
  Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.

  I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
  I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
  Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.

  =====================================
  It is possible that the DVD + RW rewritable is the problem.
  Some hardware is not fully compatible with them.

  Personally, I did not have much success with DVD rewritable.
  Verbatim DVD-R DVD have been reliable for me.

  When I need a copy of a home made DVD I create an ISO
  Image file... so I can quickly burn as many copies as I need
  without loss of time to re-encoding of the project for each
  copy.

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Good luck...

• I am trying to burn a dvd folder in again, on a dvd on another mac equipped with a dvd burner...

  I am trying to burn a dvd folder in again, on a dvd, on another mac equipped with a dvd burner...

  Picture quality and sound well when reading. but the picture is not complete SD widescreen. It has back up and down.

  Can someone advise?

  What is the best way to burn? data? film?

  Thanks Rod

  Hi Rod,

  First things first - was your first widescreen sequence? How did you create assets for the DVD? Recommended method is to export from first as 'MPEG-2 DVD' and choose a suitable preset, such as "NTSC DV Widescreen". When that is imported into, there must be big screen automatically. Looks like maybe the DVD that you created is 4:3.

  Regarding the engraving, it is better to export an IMAGE of a reminder, that create a standard .iso (disk image) file that can be burned with any number of third-party programs. I don't know what's available for Mac, there are free applications for PC such as Burn Aware.

  If you use the method of the "record" for some reason, do NOT burn as the 'data' - which will not be a good DVD that will play in set-top DVD players. Result will work on computers. Burning software should have an option to 'DVD Video' and who will properly format it to burn a DVD with appropriate specifications. The .iso method is preferred, because it doesn't work, no games.

  Where do you watch the DVD it shows black bars, what reading device?

  Thank you

  Jeff Pulera

  Safe Harbor computers

• I have an iPad Air. I took a 40 min video with my iPad and am able to see it on the iPad. However, when I tried to transfer it to my laptop, I see this video on the laptop. It shows what I took. How can I transfer it?

  I have an iPad Air. I took a 40 min video with my iPad and am able to see it on the iPad. However, when I tried to transfer it to my laptop, I see this video on the laptop from the list of the iPad. It shows and transferred everything that I took on the iPad (other shorter videos and pictures) just not the big one one. How can I transfer it? Help, please.

  This seems to be a "feature".

  You must use an application like

  "Dukto is a simple application that allows you to share files between devices connected to the same LAN (wireless) network."

  http://www.tidal.it/?page_id=309&lang=en

  http://www.msec.it/blog/?page_id=11

  more info here:

  How can I transfer large video files to iPad 2 for PC or a memory card without compression?