I can check a message that my CPU fan is not working?

Similar Questions

• Dell Inspiron N5110 CPU fan does not work

  Hello world

  I have a problem with a DELL Inspiron N5110.

  When I turn on the laptop, the fan runs for 15 seconds then it turns off by itself... but the Windows starts correctly, and other components work fine.

  I know that I can't use my laptop if the CPU fan does not work because it will overheat the cpu and the motherboard so...

  Could you please give me an advice?

  Thank you

  The fan will run at powerup self test time, and then won't turn on (or run at full speed) up to a set temperature is reached.

  Function that replaces the motherboard, check that the thermal pads have been replaced when the radiator has been removed from the system.  If this part was not replaced, the system will run very hot.

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• The CPU fan does not work on Satellite A60

  Hello world

  I have a little problem with my laptop.
  I noticed my cpu fan does not work. only the second fan are working fine. (general fan)

  my PC is a satellite A60
  You have a solution to find why my fan does not work?
  THX

  Hello

  I put t know what fan you mean because I saw only a single fan at the bottom of the unit. However, perhaps the second fan is hidden.
  It's not easy to say why the fan doesn't work. Maybe dust clog up the fan and cooling module may not work correctly. You can try to use the vacuum cleaner to clean the fan.
  If it doesn t work so I guess there must be something wrong with the material and to fix this, replace this part. But in this case I recommend to contact the after-sales Service of Toshiba partner. He has much more experience in such cases.

• I get a message that the print spooler does not work

  printer was arrested, computer, shut down, turn on the computer, open a word file, checked the spooler.exe and it sees immediately 99% CPU usage.  Then I get a message that says that the spooler is not enabled.  What should I do?

  Are you trying to print before you get the error message or just come to the top as soon as you open a microsoft word file? are you sure this is spooler.exe which is taking up all the CPU not all processes combined?

• My laptop says that the system has detected that a cooling fan does not work correctly

  My laptop cooling fan stop working

  If you haven't cleaned your laptop since you bought it, it can y dust/dirt clogged in fans, then he must have stopped working.

  OR

  In case if you overloaded some cell days with intensive, ongoing use of heavy tasks running.

  Check if you have disabled the fan of the BIOS settings.
  To access the BIOS settings, press ESC when the laptop starts.

  Also apply thermal paste and carefully clean the motherboard of the laptop, entered air, etc.

• I get a message that my audio device is not working. It worked fine the other day. Is it possible that something has been disabled?

  How can I check my audio device?

  Hello Charlotte T.

  Thank you for your message.  Nothing has changed recently to include the hardware, software or updates?  If your device has been working a few days previously, you can perform a system restore.  Click HERE for the system restore instructions.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• When I try to batch photos to resize in Scripts > Image Processor function, an error message that says: "comand"Pen"is not available. What can I do to fix this?

  When I try to batch photos to resize in Scripts > Image Processor function, an error message that says: "comand"Pen"is not available. What can I do to fix this?

  Yes Adobe tile action fails with the error when he didn't is not the active selection. Note that the Cut Out, built-in frame and thumbnail (selection) after their name. These actions require an active selection to the selected mobile dotted lines before using the action.  Action seeks to soften the selection that were provided to you.  There was no selection, so there is nothing to be flag.

  In addition, the step of the pen in the action of the tile is an interactive step on its dialog box is.  An interactive action defeat as the design of the Image Processor script commands.  Isn't interactivity in a batch.

  

• Hello my name is jose and I would like to know how can I use the adobe CAMERA RAW bridge because the use of bridge and the desire to open a raw image of the camera, I get a message that says: BRIDGE HAND aplicaion NOT ACTIVE. BRIDGE REQUIRES THAT A PARTIC

  Hello my name is jose and I would like to know how can I use the adobe CAMERA RAW bridge because the use of bridge and the desire to open a raw image of the camera, I get a message that says: BRIDGE HAND aplicaion NOT ACTIVE. BRIDGE REQUIRES THAT A PARTICULAR PRODUCT HAS STARTED AT LEAST ONCE THIS FEATURE. I wonder what that means?

  I use a 64 - Bit lapto operating system (windows 7).

  Thank you

  my email is: [email protected] If you send me the answer to my query

  You must activate Photoshop.

  Mylenium

• keyboard Microsoft creator - get a message that says: some features are not available when running on versions of windows prior to windows vista

  I installed the microsoft keyboard layout creator, but when I start the program I get a message that says: some features are not available when running on versions of windows prior to windows vista, I checked if my computer is compatible with the system requirements before downloading the program, can someone please help, thanks

  What functions are supposedly missing that you need?

  This?
  http://msdn.Microsoft.com/en-us/goglobal/bb964665

  Maybe you should have got version 1.3 instead?  (http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21476)

• I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. »

  Original title: webcam inspiron 1420

  I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly.  I also looked and found something that seems to say that the app crashed.  Any ideas?   Thank you

  BFM

  Hi BartMorgan,

  ·         What is the error correct mrssage?

  ·         Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also check if the troubleshooting steps to help you in the article mentioned:

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612

  Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.

  Step 1: You can try to remove the webcam in Device Manager:

  a. click the Start button, in the start search box, type devmgmt.msc and press enter.

  b. in the Device Manager window, click view , and click Show hidden devices

  c. right-click on the webcam is installed.

  d. in the dropdown menu, click Uninstall or Remove.

  e. in the dialog box to confirm the device removal, click the OK button.

  Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.

  a. click Start.

  (b) in the search box to start, type appwiz.cpl and press enter.

  c. in the programs and features list, select the webcam program and Uninstall it.

  d. restart the computer.

  NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.

  I hope this helps.

• I get the message that Lenmark X 422 is not installed properly

  Dungeon IK's message that Lenmark X 422 is not installed correctly, I have not done anything to cause this.  IM told the unstall driver and reinstall.  If I uninstall where can I get a new one and it costs.

  This is a printer driver.

  If you do not have the printer Lexmark X 422, just uninstall the drriver - there is no need, unless you have the printer

• Try to access some Government Web site, but get message that it uses a protocol not supported.

  Original title: compatibility

  I'm doing something online with a governing body, but whenever I try to go ahead he said he uses a protocol not supported... can you help me please

  Hi Marystack,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are trying to access some government site but get message that it uses a protocol not supported. This question might be if you are connected to a network domain, or there is no restrictions applied to surf these sites.

  If you use Internet Explorer and cannot open certain websites then, there may be a chance that the site is not compatible with Internet Explorer. So, I suggest to open these websites in compatibility view and see if it helps.

  • Open Internet Explorer.

  • Open Web site which is getting blocked.

  • To open the toolbar, press the alt key pressed .

  • Now, click on Tools.

  • Then click on compatibility view settings.

  • You will see the name of the Web site under Add this Web site, to do this, click Add to add this Web site.

  • Close the window and restart your computer.

  Try it out below mentioned methods and see if it helps you to solve the problem.

  Method 1

  If the problem persists, try to trust these websites by following the steps mentioned below.

  Step 1: Open the trusted sites

  1. Open Internet Explorer.
  2. Press the Alt key to display the Tools menu.
  3. In the menu, click Tools.
  4. Now, click on Internet Options.
  5. Click on Security tab.
  6. Select Trusted sites.
  7. Click the Sites.

  

  Step 2:

  Add the trust Web site

  1. Enter the address of the site you want to add.
  2. Click on Add.
  3. Close the open windows of Trusted Sites and Internet Options .

  

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine

  I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine
  and my windows update software no longer works. When I check the status of my activation of Windows 7 in the computer
  Properties, it is reported that Windows IS enabled. When I run the Windows activation repair tool it will fail
  and I get the following error messages: 0x80004fe21 and 0xC8000247. I also tried the Windows FixIt tools for
  activation and Windows Update without success.
  Please email me or call me with suggestions or PH 513-289-4785 thanks

  Tool Windows MGA results

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - B72VQ - G6RKT-G7B6M
  Windows product key hash: ISzyTLRWNXmB8 + BGCAyBkfJVOE0 =
  Windows product ID: 00359-OEM-9804563-10468
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {47CDEE04-15E7-4393-823C-9F19163CCB88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.110408 - 1633
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {47CDEE04-15E7-4393-823C-9F19163CCB88}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-G7B6M00359-OEM-9804563-104688S-1-5-21-4105253140-3248553093-608739849ASUSTeK Computer Inc.        UL80VT American Megatrends Inc.. 214 20110117000000.000000 + 00061B83607018400F804090409Eastern Standard Time(GMT-05:00)03_ASUS_portable100100Microsoft Office Enterprise 2007129AF2C442EAD0F143bTpphlGMO63Fl + N/RWz9H3zae4 =81599-906-1700076-651751100Microsoft Office system 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-045-610468-02-1033-7600.0000-3172012
  Installation ID: 104731195014616722429474505736359264920732256592507294
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: G7B6M
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 28/11/2012-09:54:21

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 11:22:2012 12:30
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFyGfz73n8sErBkTCA4/HhDcKpGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1150 011711 APIC
  FACP 011711 FACP1150
  DBGP 011711 DBGP1150
  HPET 011711 OEMHPET
  START 011711 BOOT1150
  MCFG 011711 OEMMCFG
  SLIC _ASUS_ Notebook
  CO-SUBMISSION 011711 OEMECDT
  LASRYVITRAGE 011711 OEMB1150
  GSCI 011711 GMCHSCI
  SSDT PmRef CpuPm

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.