I can create folders, but NOT towels

Similar Questions

• I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

  I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

  Hi Marty_McGrath,
   
  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I can create folders, but when I try to bookmark a page these folders are not displayed.

  I created a folder in my bookmarks and bookmark tab in it. When I mark a site that I want to have in this folder, I have to create it, and then manually move the folder because none of my "custom" files appear when I create the bookmark.

  Try this:
  Go in Tools > Modules > Plugins.
  Select an item in the list, and then click disable.
  Do this for each item in the list except the plugin by default.

• Outlook Express 6 problem - the Outbox can receive mail but not send Ox800CCC79 error message

  Can receive messages but not send error message Ox800CCC79

  This account has already worked? The error message indicates that you are either using Promail and attempts to send via another server, or by using another server and trying to send via Promail. Whatever it is, the error 550 is a refusal to relay messages.
   
  550 - unauthorized relay
   
   

• Outlook Express 6 - can receive messages but not send - error number: 0x800CCC0E

  Original title: Outlook Express 6 - can receive messages but not send

  I recently installed SP3 on my Windows XP machine and installed Internet Explorer 8. After that, Outlook stopped mail (still receives, if) and gave me this error message:

  The connection to the server has failed. Account: 'mail.qmcompany.com', server: 'mail.qmcompany.com', Protocol: SMTP, Port: 587, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  I tried everything but reinstall Outlook Express. Is there a compatibility issue with IE 8? Any help would be appreciated.

  John

  Hi John,.

  Follow the steps described in the article below

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express (OE)

  http://support.Microsoft.com/kb/813514

  (Article applies to Outlook Express 5.5, steps applies to OE 6)

• I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

  It seems to work now, so if my emails get screwed up again, I'll take your advice... don't understand why he sends now and am not asking my password as it does... but I don't want to do something that I don't know if it's working now... What do you think?

• I can't delete files to clean up existing files. I can my phone, but not my PC

  I can't delete files to clean up existing files. I can my phone, but not my PC

  Hi hugob,.

  You should still be able to delete the files in your Acrobat.com account (and receive a confirmation message "delete file" when you do. If this isn't the case, please clear the cache, and then open a session in https://cloud.acrobat.com/files. When you select a file to delete, you will see a list of options at the top of the list of files - on the far right, you will see the delete option.

  Best,

  Sara

• Workgroup Windows 7 - can see the folders, but not files in the shared directory

  I have three windows on the same workgroup machines (2 machines Windows 7 [A, B] and [C] XP machine). I have a shared folder on the [A], with many subfolders. When I created first the part, [B] has been able to see all files and folders in the shared directory on [A]. Next, I added several subfolders on [A]. Now, [B] can see new subfolders but not the files in the breast. Why is that happening and how can I solve this problem?

  [A] and [B] are capable of full access to the shared folders on [C]. The permissions on the shared folder on [A] are set to "Everyone" + read/write. I tried several reboots of each machine. Hit "Refresh" on [B] does not make the files appear. It is not password-protected. It turns out that [C] has exactly the same problem as [B], that makes me think there is something to do with the share on [A], but I can't understand it.

  On [A].

  Under sharing advanced > caching, I chose only "the files and programs that specify users are available in offline mode."

  Under [advanced sharing] > permissions, "Everyone" is given full control, change, and read them.

  Under [advanced sharing] > permissions > Add > locations, machine [A] is visible, but are not machines [B, C].

  Any thoughts? Thanks in advance!

  Hello

  Thanks for the reply and keeping the status updated.

  There are options of shares with different depending on whether your PC is connected to a network and what type of network is.

  To share the points with a particular person, choose the account of this person.

  To share with all members of your home group, choose one of the options Group of the House .

  To select libraries to share with all the members of your home group, swept from the right edge of the screen, tap settingsand then tap Change PC settings. (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click settingsand then click change PC settings). And then tap or click home group.

  To prevent a file or a folder shared with anyone, press or click the share tab and then press or click stop sharing.

  To change the level of access to a file or folder, press or click on the sharing tab, and then select Home group (view) or collective (view and edit) home.

  If you need to share a location such as a disk or system file, use the Advanced sharing option.

  Change the settings for network, file sharing discovery, sharing public folders, sharing protected by password, home group of connections and file sharing connections.

  To turn on network discovery, file and sharing printers, and public folder sharing in Windows 7

  Control Panel > network and sharing Center > change advanced sharing settings > public folder sharing.

  -Turn on sharing so anyone with network access can open files.

  -Turn on sharing so anyone with network access can open, change and create files.

  Hope this information is useful. Just reply with the results. We will be happy to help you. 
  

• After the migration of profile, files can be seen but not read

  1 screenshot shows the folders as expected, but the choice by clicking on it does not reveal the 2 messages) the other tabs (created from a previous installation) show the correct data 3) menu option help / troubleshooting work ok - exit attached 4) another menu option do not work (for example "Help / About" does nothing) 5) I am running under a brand new installation of Linux Mint 17 / cinnamon - have tried to uninstall / re-Setup version 6) installed is 1:31.6.0 + build1 - 0ubuntu0.14.04.1 7) ~/.thunderbird contains two profiles, dw6qkyib. News and q0vb0h3j.default. Profiles.ini points to the latter

  (Already posted same question under [email protected], but not able to access the verification email - downloaded from the mail server and lost in the black hole!)

  The problem seems to have been using the old profile. Not only it has resulted in access to messages becomes incredibly slow, some of the meu options stopped working completely (e.g. tools / address book, help / about).

  After a discussion on the Linux Mint support forum http://forums.linuxmint.com/viewtopic.php?f=47 & t = 195264 & sid = b8b72a18e053f2f03dfe0e11cf21a59e I created a new profile and solved the problem.

• Wireless laptop running Vista 32 and wired desktop under Vista 64 can access Internet, but not each other!

  My laptop Vista 32 unreal access router and ping its own IP address, but no access to Vista 64-bit Wired Office with ping or try to access folders shared I place some months ago and used without problem until about 2 days ago. I recently did a restore of the laptop but it worked after that and I adjusted all the settings. I have Net bios over TCP/IP enabled on both machines. I have two machines on the workgroup and file sharing is enabled on both. Vista 64 desktop computer can access the Internet but can not access the shared folders that I put in this PC! He cannot ping the router either but can be accessed via the routers Web page. The router is configured correctly as well. I became a master browser errors on Vista 64 desktop until I changed the registry on the laptop off car with respect to the list of servers. I'm a computer technician with networking experience, but am confused on this one. There are so many problems over there near the mine, but they usually have xp machines trying to access Vista or vice-verse. In addition, they cannot access the Internet generally. If anyone out there has any intelligent suggestions I'm desperate, but know that I have this research completely so guess I did all the basic troubleshooting to save time you and me. Thanks in advance to anyone with advice!

  Rick Saunders

  12-09-2010

  Hey thanks for getting back to me, I wanted to let you know that I could solve the problem! I'm not sure excatly what the problem was, but I went and bought a fixed register a program so that I paid for, as you no doubt know the free just ruin your machine more than it is useful, well I ran that and restarted and BOOM! Now even if I can connect to each computer and the internet. I'm still not able to ping? Now when I say that this is not so much genral, the laptop I can ping any name of site Web and number but not the PC. On the PC I can ping its own IP address but not the router or laptop? But it has no bearing on anything so I anticipate leaving me well enough alone. I how ever to download a graphics professional ping program, but not to worried about it! Thank you so much for you help and if I need more help, I hope you are avalibale!

  Rick Saunders

  The coach of the computer, LLC

• effects of IMessage can be received but not sent

  On my old iPhone 6 and I had a problem where I could send effects iMessage, but not receive them. I solved this by disabling the reduced movement and signing in iMessage (some so I had been using my phone for centuries while disconnected (e) which!).

  Today my iPhone more 7 arrived and I now have the opposite problem - I get the effects but I can't send them. When I click and stand on the blue arrow, after a few seconds, the screen goes blurred except for the text that I just wrote. I have no menu showing me various effect options.

  Any ideas what is the cause? I have tried toggling movement reduced on and outside, iMessage on and outside, iMessage signature and put it back, but none of this has made a difference.

  Hi porrig!

  It's always exciting to have a new iPhone. I'm glad to hear you have the iPhone 7 more! iMessages with effects of message sending is a fantastic new feature of iOS 10. You are in the right place for help.

  Your new iPhone Plus 7 has the ability to detect different levels of pressure used. This feature is called Touch 3D. You may notice additional options by pressing firmly on the applications, for example, because of this feature.

  In this case, it seems that you use the right process to send the effect of the message, but the blue arrow may need a firmer touch that you are currently using. Try to use a firmer touch on the blue arrow to see if the message options.

  If this solves the problem for you, but you want to adjust the firmness necessary to display these options, check out this resource:

  Change 3D on your iPhone 6s or 6s iPhone tactile sensitivity more

  The resource applies to your iPhone 7 more, too!

  Take care!

• Apple TV app can see one but not both of my Apple TV

  Using the new Apple TV application, under the menu Add Apple TV, I see one of my Apple TV (downstairs) but not others (on the floor).

  • The two Apple TV are on the same network, connected via Ethernet / 10 BaseT to the main router
  • The two Apple TV are on the 7.2.1 software version and are of the variety A1469
  • The router is an Apple Airport Extreme
  • There are two, Apple Airport Express in the network, also connected via Ethernet / 10 BaseT
  • More important still, the AppleTV TWO appear in Airplay, since the iPhone even that, in the application of the Apple TV, cannot see any of the AppleTV.

  Rather mystifying. I can pair one of the AppleTV, but it is not even seen by the app. I can't make sense.

  Try the following steps for the Apple TV 2 & 3, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > general > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Reset Apple TV (settings > general > reset > reset all settings)
  5. Restore the Apple TV (settings > general > reset > restore)

• I can access network, but not the internet.

  I am able to access my network but not the internet.  However, I can get on the internet if I use parallels.  Does anyone else have this problem? If so, how have you managed to solve.  I rebooted without parallels and nothing changes.  Any suggestions?

  In the menu bar, you select

   ▹ System Preferences... ▹ ▹ ▹ Advanced TCP/IP network

  What values are given for the following?

  Configure IPv4

  IPv4 address

  Subnet mask

  Router

• RV042 to RV220W VPN works... can ping IPs, but not host names

  We have an installation RV220W to the main office one-site-2 program (gateway-to-gateway) to remote desktop RV042 VPN

  RV220W has subnet 192.168.1.x (Windows 2003 server hosting DNS, DHCP)

  RV042 192.168.2.x subnet a (machine Windows 8, RV042 is hosting DNS, DHCP)

  We can ping IP numbers in both directions, but not machine names.  I know it's linked DNS are unsure which solution is.  All advice is appreciated.

  Thank you

  Lori

  Hi Lori, hostname access is generally limited to the range of local IP addresses. In addition, the router does not host a DNS record to resolve hostnames on part and other VPN respectively. You can configure the LMHOST files on each machine or you can try to use NetBios.

  You can enable NetBios on the VPN tunnel configured on each router and disable the Firewall window or make exceptions to allow NetBios traffic through the firewall of the machine.

  -Tom
  Please mark replied messages useful

• BlackBerry smartphones, I can send emails but not receive everything?

  Hey guys n gals.

  I'm new to Blackberry and to be honest I'm not the most technical person in the world!

  I recently got a blackberry pearl 8100.  have allowed the bolt on with 02 etc.

  I can send emails, but I can't receive all - would appreciate any help you can give me

  Thank you

  Hi guys,.

  EU thanks TI tri - turned out there was a firewall in place that blocked all my emails to come through.

  for those who don't know, here's what to do: -.

  go to options, security options, firewall and uncheck the box for BIS

  see you soon