I can do my 8500 Pro all-in-one wireless Bluetooth

Similar Questions

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• Can the HP MS-213. all in one memory Fund be upgraded to 8?

  Can the HP MS-213. all in one memory Fund be improved from 4 to 8?  I am running windows 7, 64 bit.

  4 is the maximum:

  http://support.HP.com/us-en/document/c01880718

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I have exactly the same problem in Windows Vista Ultimate Edition.  I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

  I see that you asked initially that this issue in 2010.  Has there every been a resolution?
  Elliott
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-profile-keeps-reappearing-and-displacing/515108df-1aa6-457f-9262-6be835f82198

  My Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.

• Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Hi xxtopgunxx,

  Welcome to the HP Support forums.  I understand you want to print from your devices Apple to your printer Deskjet Ink Advantage 4625 without the printer is connected to a wireless network.

  It is possible that we can get the printer to disseminate its own network. Please note that the network will broadcast the printer will not have access to the internet.  Please follow the steps below:

  • On the front panel of the printer, please press the wireless button
  • By using the buttons on the right, highlight and select wireless settings
  • Highlight and select Restore Defaults
  • Select Yes. A message appears indicating that the default values of the network have been restored
  • Open your application settings on your Apple device, please
  • Please click on wifi and choose the network that starts with "HP-SETUP.  This should connect to your Apple device to the printer
  • Now you should be able to print using the 'Action' icon.  If there is not a print option when you press the action icon following all guidelines for Apple AirPrint

  If you go to print and your Apple device does not see the network, you will need to follow the procedure again. It should be at least 60 minutes before the HP - Setup network ceased broadcasting.

• Pro, All in One 3520 - Downgrade Windows 7 64 bit to 32 bit

  Hi all

  I have a Pro all in one desktop PC 3520 with Windows 7 64 bit pre-installed, for some reason, I think to downgrade the os to the 32-bit version.

  Is it supported? Need a new Windows license (32-bit version) to reinstall the OS?

  Thank you for you in advance for your support.

  Stefano

  To answer your questions

  (1) is it supported? -from this page , it appears that 32-bit is not

  (2) it is necessary a new Windows license (32-bit version) to reinstall the OS? -No, the license key will work with both versions.

  I'm really curious why it's coming.  A Windows operating system, pre-installed, work goes to the function.  What is proposed may not work, so why mess with it?

• HP Pro all-in-One PC 3520

  the 3520 PC does HP Pro all-in-One has a touchscreen monitor please

  This is a machine of i3 level company. There is no touch screen, according to my research.

• How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  Probably, you mean a Laserjet P3015 series multi function device?

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=3815798&prodTypeId=18972&prodSeriesId=3815797&swLang=8&TaskID=135&swEnvOID=4062

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• Impossible to install my new HP Deskjet 3545 printer all-in-one wireless

  I bought the printer HP Deskjet 3545, printer all-in-one wireless on August 13, 2014. When I tried to install the printer for USB connection after downloading the software from the CD provided with the product, it displays the message... "" Cannot install hardware, module HP Deskjet series 3540 is not found. ""  Help, please

  Problem solved.  Problem was with my operating system.  Upgrading to windows 7 and the printer is installed. Thank you all.

• Error of 4500 HP all-in-one wireless Wep

  I installed the printer HP 4500 all-in-one wireless.  He acknowledges the Apple network and then ask to for the WEP key.  I enter this code and it says invalid WEP.  It is not the wrong password... Help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP6500 all in one wireless Cup middle of page

  We recently bought an all in one printer wireless hp 6500 for my work, after the support of spending 2 days on the phone with tech we have installed, it worked great until we went to print from our quickbooks and it will show only half of the page... and I don't think its quickbooks because it does randomly with other programs. I really need a solution and don't want to call technical support again. Help!

  Only, we got rid of our nightmare week 2 HP 6500 all in one POS... We have replaced by the Lexmark 7600 Series all-in-one wireless and absolutely NO problem installing or printing, scanning, fax, copy and it was cheaper to boot. DO NOT BUY HP WIRELESS PRINTERS!