I can not get windows to start.
I can't log on my computer except in safe mode. I don't know what the problem is. I am running XP service pak 3. It acts like it will start normally. "" and then just after the windows xp screen comes in a gray box flashes on saying info no input signal go to energy saving and then takes me "you want to start windows normally" or SafeMode etc.. Ive tried going to last known good configuration and nothing works but the mode without danger. Help, please!
Hi margaretbrown,
This problem may be caused by one of the options below.
1. monitor not connected correctly.
2. bad hardware
Monitor not connected correctly
Verify that the monitor is connected to the back of the screen, as well as the back of the computer.
If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.
Faulty hardware
If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.
* If another monitor works on your computer, it's probably a bad screen.
* If your monitor works on another computer, it's probably a bad video card.
Tags: Windows
Similar Questions
-
Windows Vista restore
My phone fell, and I can not get Windows to start. The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?Have you had your laptop, checked by a technician?
If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.
-
Where can I get Windows 7 Starter?
Hello
Where can I buy or download a copy with a license key of Windows 7 Starter? I have an 'upgrade' of Win7 Starter key to Win7 Home Premium...
FYI: I asked recently on the upgrade from my old computer under Vista Home Premium to Windows 7 Home Premium, with the support of 'Cat' of Microsoft; because I couldn't find an upgrade of Vista Win7 anywhere. Therefore, I felt that I could buy a Win7 Starter 'upgrade' to Win7 Home Premium. The support agent does not otherwise as a State nor made the Microsoft Web page, she posted a link for me.
Therefore, it does not work so now I'm stuck with a button 'upgrade' Win7 Home Premium Win7 Starter. I immediately contacted 'Chat' support still once, and finally, this agent, after a few minutes, said that couldn't be done.
Any help would be appreciated...
Ralph
It seems that what you bought was an upgrade Express intended to only upgrade a computer running Starter to Windows 7 Home Premium edition.
Unfortunately, Windows 7 Starter is preloaded on new computers.
Your best option is to return the Windows 7 Starter to Home Premium Upgrade for a refund and buy the good upgrade.
Where can I still get Windows 7?
Full version-
Microsoft Windows 7 Home Premium
Version upgrade-
Microsoft Windows 7 Home Premium Upgrade
Family Pack:
Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)
-------------------
Refund:
http://www.Microsoft.com/Mac/trial
Items ordered from Microsoft Store online:
-
Brand new Windows 7 SP1 installation on a new disc wont format download updates from windows update, just stay to "check updates". Tried troubleshooting for windows update but starts ok, but never complete too.
I tried troubleshooting Microsoft online diagnosis that difficulty various problems but windows update has not changed
All clients by default update can not handle KB3168965 (released four days ago), most a few others. Download and install KB3161647 included in KB3161608.
https://support.Microsoft.com/en-us/KB/3161608
KB3161608 requires KB3020369 installed.
https://support.Microsoft.com/en-us/KB/3020369
Manual installation of updates requires research to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.
Best regards, VZ
-
How can I get rid of him. I put in Incredimail by mistake and can not get rid of start my
I thought I wanted to Incredimail, but decided to remove. Now when I go on Google Crome this My from Incredimail appears. How can I get rid of him.
Hello
The problem happens on Internet Explorer as well?
Try to use the fixit to uninstall the program.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
If the problem persists, visit the link to save the query in Google Chrome for better assistance.
http://www.Google.com/support/forum/
Hope this information is useful.
-
can not get windows puts down dale load KB2492386 and KB2522422
Hello. for several months, I get this window dates but not down load I used fix it several times too dates code are KB2492386 and KB 2522422 please help me how can I solve this down load them into my computer
Hello
You get an error code when the updates of Windows fails?
Perform the steps in the article mentioned below and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope that helps. -
Oracle VM Templates FSCM 9.1 - can not get application server started
Hello
We managed to set up oracle vm server and oracle vm server. We downloaded the models and imported in virtual machine Manager. We went through the console and filled in accordance with the instructions of the oracle. We can now see the journal of PeopleSoft in the page, but get the message that the application server is down.
We have connected to the PIA and pulled upward from psadmin. We tried to start the application server but got the error message saying that we have a valid user name and password. Exact message is
Error initializing CMDTUX_CAT Application ERROR 1685
tmboot: 827 CMDTUX_CAT: ERROR: fatal error occurred; launch the user error handler
exec tmshutdown - qy
Does anyone know how to fix this?
We had to take the name of the TESTDB database (and not to use the name of FSCM91 according to the instructions)
Any help will be appreciated.
NaishadI'm happy for you!
Nicolas.
-
After going to the windows update page and clicking on the express install button I get an error number: 0 x 80240036. Any ideas on FIXING THIS?
I have seen this error quite a bit lately and the majority of the case because Windows XP is not upgraded to SP3.
To determine which service pack is currently installed on your computer, follow these steps:
- Click Startand then click run.
- Copy and paste, or type the following command, and then click OK:
winver
A dialog box displays the version of Windows and the service pack that is currently installed on your computer.
See also: http://support.microsoft.com/kb/2497281
You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003 -
When I turn on the computer, it goes to a blue screen and stops there.
If you have performed according to instructions of the manufacturer of the computer Vista recovery disc and you encounter problems by encouraging them to work, you must contact the manufacturer of the computer for help.
This isn't their recovery process, Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
I can't get Windows Live Mail connected online
I have the internet connection, but I can not get Windows Live Mail connected online, nor Internet explorer. Any other, Firefox, Skype, Chrome... works very well. Thanks you for FELP.
Windows Live Mail is supported in this forum
http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all -
Original title: signature on a router encrypted with Windows XP Home Edition
I have a Toshiba laptop with Windows XP Home Edition. I am trying to connect wireless to a Cisco router on a corporate network. Encryption access code is length 55 numbers and I can not get Windows to accept a code with so many characters that I can on the router. Is this because I use Windows Home version? Y at - it an upgrade that will help you? Will I be more successful if I update to Windows XP Professional?
Hello
You should contact the support staff of assistance companies.
You can also try to post this topic on the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro
-
Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms). I can not get this error to go away and start my PC now. Help, please!
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or try this Forum:
http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads
Restore the previous settings, repair facilities, and retrieve data.
See you soon.
Mick Murphy - Microsoft partner
-
Can not get a sound in Windows Media Player
Original title: How can I see my media files?
I would like to see some video media files, I have downloaded onto my LG Shine of cel phone and when I go to view them with Windows Media Player there is no sound... these files have an extension of ".3g2"... also named as files BLT or 3GPP2 video/Audio files... How to make some audio?... This has to do with codecs?
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
1 did you do changes on the computer before the show?
2. do you receive any error messages?
3 is the issue limited only to Windows Media Player?
Settings in Windows Media Player, some corrupted codecs are some of the reasons for which you can not get audio in Windows Media Player.
I suggest you follow the steps mentioned below:
Method 1: Check the volume settings in Windows Media Player
See the site:
Change volume settings in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/change-volume-settings-in-Windows-Media-Player
Method 2: Run the troubleshooter
See the site:
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-pH/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 3: Install the necessary codecs
See the site:
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
CS 5 will not start. Scratch disk cannot be found. How can I get photoshop to start?
Hi Rsrich,
Please follow the steps below to reset the Photoshop preferences.
> Hold down the SHIFT key, command and Option (in Mac) or shift, Ctrl, and Alt (Windows) key and click on the Photoshop CS5 icon until you get a dialog box to delete the settings of Photoshop file.
> Click Yes to it.
Note: Using the hotkey, preference files for custom shortcuts, workspaces, and color settings will also reset to the default.
Also, please mention the operating system you are using.
Let me know if it helps.
~ UL
-
Can not get updates Windows 7, error code 646
Windows updates fail almost always error code 646 today.
Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)
8 Windows Explorer has stopped working properly, running on windows 7
There has been a change in the health of windows, event 42
Here are some of my problems
* original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP
Maybe you are looking for
-
using an old bookmark html file
I recently had to format my hard drive and reinstall windows XP.I've saved my favorites as a html file, and I want to replace the bookmarks file into the new version of Firefox with the old version, so all my old favorites show instead of the bookmar
-
What are the PCI ANALOG OUTPUT PORTS Terminal 6024E block CB-68LP
Dear all I want to get the analog output on the physical output signal. In my LabVIEW diagram, I develop the DAQ assistant and configure ao0 as analog output. The tension I want hovel is analog - 5v to + 5 volts. Terminal block, what will be the outp
-
If I plug a double band on the USB wifi adapter on my tablet, will it work? I am interested if allowed to detect a signal of 5 GHz
-
How can I disable the Windows XP Pro wifi connection?
is there a port can I close? I am a novice so it. and I had annother LAN connection.in the last hour. by itself. My firewall has already a lam configuration for microsoft then why my comp need another for microsoft tv on the TCP/IP Protocol on a seco
-
HP Pavilion dv7-6110sl second HDD
I have HP Pavilion dv7-6110sl and what to add another 1 TB HARD disk. What should I put in? I noticed the original HARD drive is attached with some kind of adapter SATA. I guess that this kind of adapter I need for second HARD drive. Can anyone tell