I can not install anything you guys

Similar Questions

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reset my sharing permissions for default cause I don't know what has been changed, now I can not install anything

  How can I reset my sharing permissions for default cause I don't know what has changed now I can't install anything, I think it has been somwhere in users

  I don't know which

  Try to fix it with system restore.
  What was this "program"? It came from a reliable source?  It would be wise to carefully check for malware also.

• I get 80200053 and 80070570 when trying to run windows update. Can not install anything that has been downloaded.

  I get the above codes when I try to update. I also can't install a program such as itunes after that which has been downloaded to my computer. This applies to everything from the internet being downloaded. I did some research and tried to fix hours and hours away without success. Please someone HELP with a real answer! I need to get my computer works normally again so that I can follow my school work! I did a fresh install of windows 7 using the partition on the hard drive recently emergency, and the problem is still there. Before that I tried recovery many times scandisk which takes much too long for no result, and update my antivirus definitions, which I am not able to download at all, then of course they usually download either.

  Hi Fabreezeo,

  ·         What is the error message or the error number that you receive when you try to install programs?

  ·         What type of Internet connection you use?

  ·         You receive this error message when you try to install a particular update?

  ·         Have you used to install own USB or CD/DVD?

  Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same

  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  Another link, you can check: http://support.microsoft.com/default.aspx/kb/947821

  You can even check out the link below: you cannot install some programs or updates: http://support.microsoft.com/kb/822798

   

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help, I can not install anything?

  I can't download anything from my computer. I tried to download iTunes on my computer and after it was done downloading it was time to do the installation, a black screen popped it and looked like his name
  C:/Documents/pump. exe or something like that. The something when I tried to open Add / Remove programs in Control Panel.

  Hi Broncosalldaybaybee,

  Thanks for posting. Can you give us the exact error message? Also what programs have you tried to install after itunes? When the error message appear? If it is only linked to itunes please contact the Apple support on the link below.

  http://www.Apple.com/support/iTunes/

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can not install anything

  I have problem, when I try to install a program such as Itunes, the installation fails, also my pc does not recognize my phone or my iPod, what can I do?

  What Antivirus utility you installed?

  suggest you follow the steps mentioned below:

  Method 1: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

   

  Method 2:

  Check if Windows service install is set to automatic. Steps to follow:

  a. click Start and type services.msc in the search box.

  b. Locate the Windows Installer service.

  c. right-click on the service.

  d. If the service is stopped, then start the service.

  e. to start the service, right-click on the windows installation program and select Properties.

  f. and in startup type, select automatic.

  g. now try to install and check if that helps.

  Method 3:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  a. press Windows + R

  (b) in the Open box, type msiexec /unregand then press ENTER.

  c. new point follow one.

  (d) in the Open box, type msiexec/regserver, and then press ENTER.

  Also, try to get information about the error in the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/is-is/Windows7/open-Event-Viewer

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I get all the time can not download anything 'Windows cannot access the specified device, path or file. You can't have the permissions to access the have__appropriate element. »

  Original title: problems cannot do anything

  Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything

  Hi birdylod,

  ·         What version of the operating system is installed on the computer?

  ·         You did changes to the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         What files you download?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  For reference:

  What to know before applying permissions to a file or folder

• Can not install or uninstall anything because Windows says "another program is installed.

  My iTunes crashed a couple of days, so I tried to download again. I've uninstalled it properly but when I came to install it it came with an error. To try and fix this iTunes suggests that Uninstalling everything about Apple. I went to uninstall these things and microsoft came up with the message: "another program is being installed. Please wait until the installation is completed, and then try to reinstall this software. "There is no installation past that I know and I restarted my laptop several times and it still does not work. I tried to uninstall other things and it won't let me. So now I can not install, repair, or uninstall anything on my laptop.

  Hi Marc,

  I suggest you to follow the steps and check if it helps.

  Method 1: Run the fix - it for the link and if it helps.
  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2: Follow the steps in the link and check if that helps.
  Problems installing and uninstalling programs on Windows computers

  Method 3: You can also follow the suggestions posted by twinklingsky dated dated April 20, 2010 in the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/another-installation-is-already-in-progress-error/3e84cba0-a4cb-4307-9a67-b506ebb105b3

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• my e-mail starts with a number, I can not install my Inbox. Any suggestions?

  I bought an iPhone all nine (the first). My mail to the company (Server/domain) begins with a number, and I can't install it I mean, I can receive emails, but I can't send anything the same mailbox correctly work on android and windows phones. Help, please!

  Your post is a bit confusing. You say that you can not install the account on your phone, but then say you that you receive by email on that account. Have you added the account in settings > Mail, Contacts > calendar? If you did, try to remove and add back. If you mean something else, please explain.

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• HP p1102: can not install software on windows 10

  Hello guys!

  I used to connect my printer (hp p1102) to windows7, now I bought the new laptop and I can not install its software on windows 10. It gives me error is 0 x 80131500 and it cannot recognize my printer during installation, but it is in the list of connected devices. Please help me!

  Well, this should solve your problem.

  1. Remove the USB cable to the back of the PC.
  2. In your type of search bar in cmd and open Command Prompt.
  3. Type "msiexec /Unregister" (without the quotes) and press ENTER.
  4. Type "msiexec/regserver" (without the quotes) and press ENTER.
  5. In your search bar in msconfig and open type MSConfig.
  6. Click the Services tab.
  7. Click Hide all by Microsoft.
  8. Click Disable all.
  9. Click the Startup tab.
  10. Click Disable all.
  11. Click OK and reboot your PC.
  12. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to install the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• own update can not install win xp

  I have a fresh install of Win XP. Now, I can not update anything:

  http://www.taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: RunDLLEntry It just started and I have not installed anything new.

  I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.

  Hello Lscherr,

  Thank you for your message.  To clarify, you are able to print out your design program?  You can try to perform a clean boot and printing of your design program.  A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality.  If you are able to print, the problem may be caused by another application of part 3.  Click HERE for instructions to boot.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.