I can't connect my tp link router to the internet

Similar Questions

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• How can I connect my favorite links in Firefox, start favourites (location) then Favorites button?

  How can I connect my favorite links in Firefox, start favourites (location) then Favorites button?

  • Favorite old Plains: https://addons.mozilla.org/firefox/addon/plainoldfavorites/

• Connect the WRV210 router to the Internet

  I'm trying to connect a new Cisco WRV210 router to the Internet via a D-Link (yes I know - you have to work with what you have) Ethernet Modem ADSL2 + DSL-320 b and can't seem to get a connection. All ideas welcome.

  Thank you

  should be in the SCOPE of the looks of the manual networking

  FTP://FTP.Dlink.co.UK/dsl_routers_modems/DSL-320b/DSL-320b_manual.PDF

  Section 3 page mode Bridged 24

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

  I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

  Hello Scot,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that the Internet connection is very slow on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

  I suggest you to follow the steps below and see if it helps.

  Method 1

  I suggest you try the procedure described in the following Microsoft Article and check if it helps.

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2

  If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Method 3

  If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

  Step 1: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Temporarily disable security software.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

  Refer to the following steps:

  1. Press the Windows key + R, type firewall.cpl , and press ENTER.
  2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

  Caution:

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

  For more details, you can see the article mentioned below.

  Enable or disable Windows Firewall

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• How can I secure my laptop when I surf the internet via a public router at work?

  How can I secure my laptop when I surf the internet via a public router at work? I mean if I use a router to work and others use too and I use a private laptop! I heard that someone hase the knoladge he can enter my laptop the couscous that he uses the same router I do. you have a special program for that, or is there a place in my computer that I need to enable to avoid the unwanted entries?

  If your Windows is updated and your Windows Firewall is enabled and that you have updated anti-virus, that would be fine. In Windows 7, you must check Action Center in Control Panel to see your security status, if something is wrong that it will show a message in Windows XP and Windows Vista, he calls the center of security.

  They may only enter your laptop or hack, if your firewall is disabled or there is a vulnerability in your system or a Malware would cause of vulnerability, and in all cases to ensure that your Windows updates and anti-virus is running, you are protected.

  Another thing is that if your router requires the password, then choose strong password and change it regularly, if it is public without password or authentication, then you need to careful when visiting Web sites because they could be monitor and publicly display information. Some websites have encryption that in Internet Explorer, it shows as a lock icon pad indicating that your transaction is encrypted and you're safe.

  It depends also wireless encryption in your company that will be in service by admin or SOUND Department if it's WPA2 which is good but for WEP or WPA, you should be very careful. I suggest to discuss this issue with your COMPUTER service too.

• I can not connect to my computer laptop get "the Group Policy client service has no connection. Access denied. "

  I can not connect on my lapto even if the password is correct. I'm getting "the political group Clinet impossible service connection access Denined.

  Original title: I can not connect on my laptop even if the password is correct

  HI, John Angelo2,.

  Try rebooting and tapping F10 to achieve the recovery screen

  You can choose to repair or restore your system

  Select Restore to an earlier time

  If it is impossible to do the above, use the installation start screen repair DVD

  This problem is caused by your user profile/registry settings/system files corruption

  Response of Mouneshawar R.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-Group-Policy-client-service-failed-the-logon/6b069a74-8524-442c-8ff1-d723e2a4e992

  Re-create the profile or restore the file ntuser.dat from the back to the top

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/c88515b4-4be7-4f6f-9988-80f8a5683b41/

  You can post on the Technet forum for help

  How to customize the default local user profile when you prepare an image of Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/973289

  Assign a mandatory user profile

  http://TechNet.Microsoft.com/en-us/library/cc786301 (WS.10) .aspx

  http://support.Microsoft.com/kb/307800

  http://msdn.Microsoft.com/en-us/library/bb776895 (v = vs. 85) .aspx

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Hi can I please have a link to download the drivers for my laptop hp remote is the hp Pavilion dv7-6c60us entertainment pc

  Hi can I please have a link to download the drivers for my laptop hp remote is the hp Pavilion dv7-6c60us entertainment pc

  Pilots come from HP. You can get them here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218602

  You might consider posting here as well.

  http://h30434.www3.HP.com/

• Hello, I am a newbie to Muse.  How can I have my ftp site up to my host to a test site I can give my client a link to see the site proposed he become?

  Help, please! Hello, I am a newbie to Muse.  How can I have my ftp site up to my host to a test site I can give my client a link to see the site proposed he become?

  Hello

  Please use the following link to see how to publish Business catalyst, Muse site

  Adobe help Muse | Publishing Web sites

  Publish content using Muse

  Let me know if you have any additional questions.

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• HP 1315v printer connected to D-Link router

  I would like to know if I can connect my printer (HP 1315v) directly to my D-Link router with a wire and then use the printer as a network printer. The printer has a firewire connection I think.  Is it possible to put some type of adapter on it so that it fits the (cat5?) on the wireless router?  Is this possible or do I have something else entirely, any help would be appreciated. Thank you

  HP usb wireless adapters sale. 1315v has of a USB connection, I think.

• I can not connect to smart wifi router outside of the House?

  Hey.

  I need to portforward port for logging in my smart wifi router Linksys EA6500 from the House to the outside? I can only connect when I am om LAN or wifi...

  Another question: I can only connect to the same router using an application? Is there a way to connect via a browser?

  THX.

  When you have created an account for your WiFi Smart router, have you received a confirmation e-mail? Check your email and you must confirm it so that you will be able to use it. Refer to this link ofr more information: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=12e0e8fa76f340739d0cb72037819ca9_Creating__activat...