HP 1315v printer connected to D-Link router

Similar Questions

• HP6110 printer connection to the wireless router, USB port

  I have a HP Officejet 6110 all-in-one printer, a Toshiba laptop running Windows 7 and a CGN3ROG Hitron of wireless router.

  I try to get the printer on my home network by plugging it into the USB port on the router. I can't make it work. Has anyone managed to do this?

  Derek

  Hello Cheetah12,

  Thank you for your response. Yes, my printer - HP6110. I have read the manual you sent me and understand that I can not connect directly to the router with print server - print server HP JetDirect 175 x Rogers, tells me that the router is turned on print server. I'll have to break down and buy a wireless printer. The networks of the great printer if I connected to a computer.

• Satellite A100-014: connection Wireless D-link router problem

  I think that it is working properly. I keep getting kicked from WLAN (connected to the dlink DWL 900AP), but if I plug the Ethernet cable it works very well.

  This vista software is a major pain. It will let me install the d-link software.

  Does anyone have any knowledge about it?

  If you need the d-link software you must ask the manufacturing of router for these updates or visit the support site for manufacturing.

  What WLan encryption are you using? I used WPA2 and I had similar problems.
  My router and the wireless network card were not 100% compatible with this encryption.

  Now I use the WPA or WEP and it works.

• I can't connect my tp link router to the internet

  just got a tp-link wr340g connected according to the instructions can not get a signal out of it no matter what suggestions guys

  Hello

  1. what operating system is installed on the computer?

  2 are you not able to connect the computer to the router?

  It is possible that it is not properly connected; It would also be the wireless desktop network card drivers are bad and no connection to the router.

   

  Method 1:  Uninstall and reinstall the network adapter drivers. Follow the steps mentioned below.

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

   

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 2: Follow the below mentioned article:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can also consider contacting Tp-link for further help.

• Wireless can not detect the connection my TP Link router (SSID)

  Hello

  I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

  Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

  I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

  Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

  Thank you. Appreciate the help...

  Solved in Paul_Tikkanen to:

  WiFi problem solved

• Connecting HP 1315v for D-Link router

  I would like to know if I can connect my printer (HP 1315v) directly to my D-Link router with a wire and then use the printer as a network printer. The printer has a firewire connection I think.  Is it possible to put some type of adapter on it so that it fits the (cat5?) on the wireless router?  Is this possible or do I have something else entirely, any help would be appreciated. Thank you

  I think that the printer must have network capabilities built to connect to your router. There are print servers that can be connected to the printer can be connected to your router. Your other alternative is to connect the printer to one of the computers on your network and configure it to share with other computers. The end result is the same that have connected it directly to the network.

  I have two printers on my network. One is network ready and connected directly to my router with its own IP address. The other is connected via usb to a computer like a printer shared and available as such to anyone on the network (provided that the host computer is turned on).

  The road to the shared printer is obviously the most economic solution. I think that what you think firewire is actually a usb connection.

  Message edited by KazooTom on 05/12/2008 10:20

• Can't print after installing new wireless router

  Replaced the wireless dsl router and 8600 OJ Pro printer no longer works.  Tried to find a way to add password/key router for printer and nothing does.  Any suggestions will be greatly appreciated.

  Hi bjzatx,

  Follow the steps below.

  1. press on the icon on the Control Panel printer wireless

  2. press the settings button

  3. scroll down and press the default network

  4. http://support.hp.com/us-en/document/c02886889 

  5. Once you have the printer connected to the new router, you will need to go program - HP - IP address files update and then enter the new IP address of the printer until the software see the printer.

• My printer is connected to my WiFi router, but I can't print

  My printer is connected to my WiFi router, but I can't print.  When I ask to print something, it goes through the options but nothing prints or is pending.  Any ideas?  Low ink, would result even if I printed a test page and newwork connedtion.

  Hello

  1 are there any changes or updates made on the computer?

  2 Windows operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. What is the serial number and model of the printer?

  I also suggest send you the link and try to run repair and check.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• Why does my tp link router cut my internet connection every few seconds

  My TP LINK router guard drop my connection to the local network all few seconds saying a network cable is unplugged won't keep me logged in even when I download any help would be appreciated thanks

  Thanks for your answers 2 of I managed to reset my router to factory re instaled my settings now it seems ok

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)