I can't start Windows normally.

Similar Questions

• Help every time I download Service Pack 3 for XP I have to System Restore my computer because I can't start windows normally. Can someone help me solve this problem?

  After I succesufully download service pack 3 and restart the computer, need me a black screen where I have the options of safe mode, safe mode with network, last known working configuration and start windows normally. Whenever I have select start normally or last known working configuration it takes back me to the same black screen. IM on safe mode with network now. im going to leave it until I can understand it.

  Yes, I have a HP with AMD processor

  I had a feeling. :-)
  See these two pages to your solution:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)
  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• I can't start windows normally or in safe mode. I can't fix with the cd.

  It shows me the following error * STOP: oxoooooo7B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000) and she advised me to check a lot of different things, but since I can't boot into windows I can't do. Can someone help me, please?

  • You have problems with programs: windows xp sp3
  • Error messages: * STOP: oxoooooo7B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)
  • Recent changes made to your computer: no
  • What you have already tried to solve the problem: fix with the windows cd

  You have indicated that you have not changed anything on your machine recently. Not auto-updates, no software, no hardware changes?

  If nothing changed, it's most likely a problem with your hard drive. If there is data that you need to retrieve the disk, you will need to connect it to another computer (which starts from another drive), and then see if it goes up the player and lets get down your data. If you do not have another machine available to connect the reader to draw your data you can buy a new drive and installs windows on it then connect the wrong disc and remove the data. Once you have the data off you can reformat the hard disk and reinstall windows and then copy your data on it. If this does not work, you can have a bad drive. If it is still under warranty, you can check with the manufacturer to determine what are the RMA procedures.

  If it is not under warranty, or if you do not want to disturb the repairs, and you can't make it work with the operating system you can still be able to use it as a data drive but do not depend on it too strongly because it most likely just eventually come out completely.

  IF you couldn't get your data, and it is absolutely essential for you to have, you may need to contact a company specialized in data recovery. They are usually pretty good at it but make sure you use a good knowledge/reputable company.

• After a power cut my PC is in a loop in the start windows normally, safe mode, last known good configuration screen

  After a power failure when I start my PC, it gets to the screen... "We apologize for the inconvenience, but windows did not start successfully... When I try to reboot in one of the 5 modes to start normally, safe mode, safe mode with command prompt SafeMode with network, last known Noah correct configuration of their work and the loops of the computer to this sreen repeatedly.

  KB307545 is a very bad idea to begin with - especially after a power failure (and it's usually just a very bad idea).  You don't describe symptoms suggestive of a need to run the KB307545, but, I'm not a Microsoft Support engineer so don't hesitate if you are forced to do, and I wish you good luck.

  What you need to do, is start in the XP Recovery Console and run chkdsk/r first.  Is is possible that the blackout damaged your NTFS file system and a chkdsk/r is to clean it.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  See what the BSOD said would be interesting, but I would still recommend that you run chkdsk /r from the XP Recovery Console to make sure your file system is not damaged.

  Answer the questions and we can see what to do next.

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• I can't start windows Vista, I get this message: Loadkey failed with error 1016

  Hello. I can't start windows Vista in all configurations. I get this message: Loadkey failed with error 1016 (sthive = 0).
  I get the same message when I try normal or safe modes. The mouse and keyboard do not work. I have
  don't know what to do next. Any suggestion would be appreciated. Victor

  Hello and thanks for your reply. The problem has been fixed. I'm not exactly sure how, but that's what happened. When I'm at a screen that says "repair windows" the cursor would not move to click on proceed. When I had almost gave up and was will wipe the hard drivbe and do a clean installation of "Windows 7", I turned on the computer and got to repair screen and the cursor was somehow operable. I clicked on continue and the computer fixed itself and has been running as good as new since. The computer is 'HP' office and running "Vista".
  Thank you and this problem is solved. Victor1244

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• error on laptop computer, start windows normally

  Turn on laptop and get to the top with a black screen saying to start windows normally or start windows of the last safe area

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer does not start, it goes into the repair system or start windows normally.

  I restarted my computer because my internet is blocked, and when he went straight to the windows repair. I chose 'Launch startup repair', but that just black flashed then went back to the same screen. So I chose to start windows normally, and restarted, it went back to the same thing. It retains, even in safe mode, etc. It's a Lenovo X 200 tablet, I got to the end of 2007.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon

  Mick Murphy - Microsoft partner

• Crash stuck to repair or start windows normally screen.

  system was crushed, put off during a windows update. never had a problem before. Stuck repair (recommended or start windows normally screen.) How can I fix it?

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't start windows, it says system32\config\system is damaged or missing I tried consol recovery and boot to the top of the cd

  I can't start windows, it says system32\config\system is damaged or missing I tried the recovery console and

  boot from the cd that it won't start any ideas?

  I cannot directions all of the Support Engineer.  It's just a Bing search engine and a link to an article.

  You need to work with someone who has actually really seen and corrected this questions a few thousand times in the real world.

  You must first start by entering in the XP Recovery Console and running a chkdsk/r from there.

  If you do not have a genuine XP bootable installation CD from which you cn safe in the XP Recovery Console or you are not sure that you have a bootable CD, make a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r there.

  Here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Messed up graphics card, now I can't start windows. .

  Messed up graphics card, now I can't start windows. said the plug to the/windows/system32/system address, or something like that, is missing or corrupted. said to run the installation disk, I don't have it. Needhelp, VERY VERY important files on my drive.

  Installing ubuntu natty to edit files, but I would have my back configuration, all that. anyway to fix it?

  NEVER begin to solve this problem with KB307545, and if you have no disk, you won't get a lot anyway.

  I guarantee engineers from Microsoft technical support that I can recreate this problem to approximately, half break you in 1 minute your XP CD and then you put challenge to fix it without the help of KB307545.  It is unlikely that the manufacturer will send you an XP installation disc.

  Looking at HP/Compaq, Dell and IBM just today, they say generally that they have stopped shipping XP CD in 2005 (6 years ago) and you can't order them on their website or through the support.  But sometimes you can get a part number and buy a CD to install XP from third-party suppliers to find research on the Internet.  Prices range from $49 to $ 200 USD.

  Knowing this, maybe it's time to STOP suggesting how to contact the vendor for installation of XP Media?  It's a good 'out' when you don't know what to do, but this isn't a useful suggestion.

  It could facilitate a resolution of the problem faster with less cycles message if you are trying to tell us you see the exact error message.

  Is this something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  If you want to use Ubuntu or something similar to copy your important files to a safe place, it is a good idea, but you should always be able to repair your XP system.

  What you need to do is to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r on your system.  Here's how:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• I can't start Windows XP pro SP3.

  The computer boots to the normal screen of HP, then turns off and then I get the screen logo windows for a few seconds, then it goes back to the HP splash screen. I tried to recover the operating system from the CD rom and while I can get to the Conference on disarmament, and it starts to load the XP operating system, I go as far as the "Kernel debugger" file and loops from the machine to the HP start up screen. If I let go through the startup, the computer performs a loop on 5 or 6 times and then the power button flashes red and I get a beep beep beep.  If I try to access the key F8 I see the first screen to select the language, but when he goes the second screen for options, the computer makes a loop to the HP splash screen.  The initialization of the BIOS is damaged? If so how do I fix?  Thanks for any help.

  Hello

  Thanks for your help, but I think that there is a problem connecting with the pc.

  I have disabled the automatic restart in case of system error. Without pressing me any key, the system started again and I did the same thing again but could not go as far as F8. I tried F10 to determine the settings for the HARD drive but the system has rebooted before that I had the opportunity to consider all options.

  Just to prove something - I don't know what! -J' having disconnected the hard drive and am not install windows.  I have a CD-ROM for the Linux operating system that loads normally without using the HARD disk.  I managed to do boot from CD but it crashes about 10 seconds after the start. I reconnected it the drive HARD and always using the CD ROM I booted up Linux and the same thing happens.  The impression that something like an internal clock is the trigger causing a reboot.  I tried to start Windows XP and it is just to do the same thing. Arghhh he is no leak!

  Well at least I can reformat the drive after downlaoding my documents and use it as a spare part!

  See you soon - we will mark this as a disaster!