I created the USB bootable windows 7, but its not start...

Similar Questions

• ACER recovery to create a USB bootable Windows 10 disc.

  I used ACER Recovery of my Aspire E5-511-C7X7 to create a Windows 10 bootable USB drive. The USB key that I used was a 1 terabyte external hard drive.
  Once the process is complete, the drive appears as 32 gigabytes, with 18 GB used.
  What happened to the rest of the storage?

  It's a WD (Western Digital) Eleemnts 1 terabyte drive

• Just reinstalled Windows 7 SP1 to allow the update of Windows 10 but can not get Windows update to apply the updates.

  Brand new Windows 7 SP1 installation on a new disc wont format download updates from windows update, just stay to "check updates". Tried troubleshooting for windows update but starts ok, but never complete too.

  I tried troubleshooting Microsoft online diagnosis that difficulty various problems but windows update has not changed

  All clients by default update can not handle KB3168965 (released four days ago), most a few others. Download and install KB3161647 included in KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  KB3161608 requires KB3020369 installed.

  https://support.Microsoft.com/en-us/KB/3020369

  Manual installation of updates requires research to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Acrobat Pro XI installed on Windows 7 but does not start

  I purchased a standalone version of Acrobat Pro XI and installed on my Windows 7 computer. The first time I try to run, I get a window asking me to check the serial number. The DDL for the product name does not list Acrobat Pro XI and it does not accept my serial number (even if I copy / pasted from the page of order on the adobe.com website). It is said that the serial number is valid, but that the product is not on the machine. And yet, when I browse to program files > Adobe > Acrobat, alto - it is.

  When I double-click on the exe file, I get the message, 'validation serial number', followed of "serial number is valid, but no product calling is not found...". »

  I tried uninstalling and reinstalling several times, to no avail. And Yes, I also tried to restart after the installation as well. I am, of course, on a deadline and really needs this job...

  Help!

  Assuming that you are installing an upgrade version, you have the SN of the eligible current modernization (AA9 or AA X) version?

• Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

  I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

  It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

• Create a USB bootable Windows 8 (pre-installed on my Samsung series 7), to exchange the SSD HARD drive and re - install.

  I would prefer to do a clean install rather than just creating an ISO.  In my opinion, this should be quite simple. normal procedure, but more I'm looking more confused, I am about this.  I really wish that Windows would stop doing things to make my life more difficult.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  For Samsung: Press the F4 key to the Samsung logo when you turn first.

  This should provide the ability to create a recovery media backup on USB or DVD

  You should be able to also access through the following measures:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

• How to create a USB bootable Windows XP to reinstall Windows?

  The blue screen of death - I need to re - install XP Home.

  There is a download to diskette available but is there a download to a memory/usb stick?

  There is a download to diskette available but is there a download to a memory/usb stick?

  If these are the disks you are referring to:
  How to get the installation discs for Windows XP for installation of boot floppies Those who are not complete installation Windows XP...

  You still need a CD Windows XP Home edition - which should be bootable.  The disks are machines which cannot BOOT from CD - and these machines probably aren't going to boot from USB.  ;-)

• After updating IOS 9.2, I lost all the Homekit settings. Cannot create the same 'home' once again, but is not visible in my Homekit settings.

  After you run the 9.2 for my iPhone IOS update 6, he seems to have lost all my settings Homekit. It is no longer my 'home' available in the Homekit parameters or in the application "Eve", or in the application 'Home' or the Insteon. Can not create new 'home' with the names I've used before, but not room for a list of people or to reset. Homekit does more work in my house.

  Initially, I SHADE (8) Phillips lamps and 6 Elgato Eve door / window sensors.

  Please help ;-)

  Noticed on my iPad (IOS 9.2 update) the Homekit settings are still there. Now trying to close the session and come back in iCloud in my iPhone, checking if it will work

• Able to boot normally to Windows 7 but can not start safe mode

  Hi, I have a laptop of Lenovo who has Windows 7 Home Premium installed on it.

  I had a few problems with not being able to see all the videos on CNN or the Weather Channel site, is not showing me any local report.  So I thought that I would try to start safe mode to make certain shortcomings.  (I can see videos very well elsewhere).  This happens on all 3 browsers I have (11 IE, Firefox and Chrome.

  However, after pressing F8 and get the option screen, once I chose the Mode safe mode (with or without network) it works the list of drivers and then darkens with only the arrow on the pointer in the center of the screen and stays like that for a long time without anything happening.

  I already ran all antivirus programs and spyware that I have, but nothing changes.  Any help would be appreciated.

  Thank you.

  Hello Clifton,

  Please provide a detailed description of the issue.

  I understand the inconvenience you encountered. However, I really appreciate your efforts to resolve the issue.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. You did it all changes specific to the computer before this problem?

  2. Are you able to see other boot with safe mode options?

  It is possible that this problem would have occurred either due to system files that have gone wrong in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Please follow the steps below give and check if that helps.

  1. Click Start, type msconfig in the search box and press enter.

  2. Select the tab Startup and check the Startup in the section startup options and the value of the radio button to a minimumand then click OK.

  3. The following System Configuration prompt, select restart or exit without restart . Whatever it is, the next boot will take you into safe mode.

  Note: Make sure that you put the computer to Start Normal once you have completed troubleshooting. Open msconfig in the same way as above, and then on the tab startup uncheck the safe boot check box.

  If the problem persists, follow method 2

  Method 2:

  Run the system restore and restore the system to a date when it was working fine. To do this, please follow the steps in the link provided below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/system-restore-FAQ#1TC=Windows-7

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• USB bootable Windows 8 Pro key

  Hi I upgraded to Windows 7 Windows 8 Pro.

  But after everything, I noticed there was a lot of files and programs that I wanted to get rid of so I decided to install a copy clean od Windows 8 Pro and format my hard drive. How to create a USB bootable Windows 8 Pro copy?
  Thank you

  See here:

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

• Files do not automatically load on USB bootable windows 7.

  Original title: Windows 7 usb problem.

  I prepare the USB bootable windows 7 when I pluged in the usb (press any key to continue) do not come and the files load automatically?

  Hello

  Have you changed the boot order to be able to boot from USB?

  • When ready to install Windows 7 from USB key:
    • Connect the USB.
    • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
      • 
    • Select the USB stick to boot from.
    • Start the installation of Windows 7.

  And that's how you did your USB key?

  You download the correct ISO file and make your own drive and use the product key located on the COA sticker. Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error creating ImageAssist USB Bootable or ISO Media

  Hey guys -.

  I'm new on the ImageAssist and work on using it for our company.  I build my base on one Cluster Hyper-V to create an ISO bootable is a much better solution than a USB bootable for me.  The problem is, I get an error when you try to create.

  I downloaded, extracted and installed the latest ImageAssist on an E6440 laptop computer with a new installation of Windows 7 x 64 enterprise on it and all the drivers installed.  I launched ImageAssist, then went to create the bootable USB key.  With a disc inserted, I selectionner select in the list, choose NTFS (get the same error with grease) and create materials.

  I confirm the action to throw the disc start creating and copying files.  A few minutes later, it seems at the end and a dialog box appears showing 'USB Drive creation... ". ImageAssist editing environment / / / failed.  Despite the message, the reader seems to work at least partially as I can boot to it.

  When you try to create an ISO by running DVD_Restore_Archetect.exe / ISO from a command line, I get the exact same message.  In the window of the newspaper, it is said that an ISO named C:\Dell...iso has been created, but there is no ISO to the root file when you are finished / I get the error.

  Any idea of that which is the cause of occur?  Thank you!

  You will need to contact our support desk and send them the newspapers that we are able to solve what could happen here.

  That said some USB keys and ports may run more slowly and cause problems with the DISM process to set up and modify the WIM to boot WinPE. Sometimes using another USB drive and or port can solve these types of problems.

  With the "/ iso ' switch fails on the DVD of restoration architect needed newspapers to begin to address this issue, because there could be a number of different problems, causing this result.

  We are working currently on created more detailed documentation to help customers to some of the common problems we encountered using Hyper-V virtual machines and Virtual Machine.

  If you can contact our support desk and send us the logs form the system you see that question we would be happy to see what we can do to help solve this problem with you.

  It could also help to ensure that you have Antivirus software installed on the system you are trying to create the USB or ISO, because there are problems with some AV software and known the DISM.

  Thank you

  Gary Babcock

  Software Development Engineer Senior ImageAssist driving