I finished with the edition of an image and when I save it I don't see some of my changes in the JPEG file, why is this? :(
I tried so many times but I can't see most of my changes and I have no idea why , please help
Jpg does not support layers, transparency and other advanced features of photoshop. It's only a composite of your creation. Flattening of your layers.
When editing, I recommend always save a version that is in the psd or tiff format. Would be nothing more than to the archives. This way you can always go back and change them later if needed.
Tags: Photoshop
Similar Questions
-
I'm blind to long to get the words of clutter. can we do without >
I want to send an e mail and the spam message. I am legally blind and long to get jumbled words. I want to finish with the words, or if it does not remove all hotmail accounts and start cleaning up. ??
The feedback forum is to post your comments on the web site of Microsoft Answers, only not to ask questions by e-mail.
Any Hotmail questions belong to http://windowslivehelp.com/product.aspx?productid=1
-
I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it so?
Hi Clarissa Tan.
- What is the complete message you receive?
- Which site did you download the fonts on the computer?
Method 1
I suggest you to use the link below to download new fonts on the computer and check if it helps.
To add a new font to your computer
Download new fonts
http://www.Microsoft.com/typography/fonts/
Method 2
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you set up the computer in a clean boot state and try to install new fonts, check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
-
Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.
Hello
Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.
Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.
Thank you
-
Distribute an image with the AIR file
Hello-
Is there anyway that I can broadcast an image with the .air file (without incorporating the image in the .swf)?
Thank you for your help.Hello-
Is there anyway that I can broadcast an image with the .air file (without incorporating the image in the .swf)?
Thank you for your help.
-
Which programs are associated with the xcm files
I found a folder in my folder system program (. 86) that I don't know or I don't know where it comes from. It has a bunch of XCM file in the known folder that cannot open my own computer, can not give me info on how to open and cannot tell me which of my programs, he joined. I want to delete it because it seems that a suspect case, but not because I can not check programs what or how much it may or may not be associated with.
Sincerely yours, Aaron Baker.Take a look at this link:
http://pcsupport.about.com/od/FileExtensions/f/xcmfile.htm
Excerpts .....................................
What is the .xcm file?
Response: A file with the XCM file extension is a Concept exported CmapTools mapping file.
How to open a XCM file:
The easiest way to open a file XCM is double-click on it and let your PC decide which default application should open the file. If no program opens the XCM file then you have probably an installed application that can view and/or edit files XCM.
-
When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Step 1: Search for the issue in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. Click Start and then click Run.
b. type msconfigand click OK.The System Configuration Utility dialog box appears.
c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
d. When you are prompted, click on restart to restart the computer.Step 2: Change or disable startup Windows and exit Windows sound and check.
a. click Start, click Run, type mmsys.cpland then click OK.
b. click the sounds tab.
c. under program events, click Start.
d. in the sounds box, click (none), or different sound, and then click OK.
e. click exit Windows.
f. in the sounds box, click (none), or different sound, and then click OK. -
problem with the htm file firsefox document, becomes it removed and deleted
I have a white screen which displays the file as 'file:///C:/Users/Mark/AppData/Local/Temp/Magentic/Mag3075.htm', is unable to get rid of it, can someone give me a simple step by step direction to remove it and get out of my computer, the magnetic program has been removed, but still have files, this isn't one of them.
First make sure you can see hidden files/folders by going to start / Control Panel / folder Options / view and check the box show hidden and system files. While there, also uncheck to hide extensions of known file types (this will be useful to you later).
Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and get Autoruns and run it to check your startup items. Search for this file. If you find it, delete it or uncheck the box allowing it to boot at startup. Will not get rid of the file itself, but it must stop the logon dialog box (a step in the right direction). Restart after you did it to see if it still appears. If so, return here after having tried other options that follow.
Now open Windows Explorer and go to that location and select the file and click on delete. I guess you have tried this and it didn't work. It gives you an error message when you try? What is the EXACT text of this error (including all codes)?
Try to use one of the following free products to remove the file/folder. Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.
If you are unable to file (getting an "Access denied" error while trying to to navigate on this one), you will need to change the permissions for folders and files to give you the permissions of all rights, even appropriating. You may need to go to advanced to check special permissions to see if there is any restrictions there including inherited properties of parent folders). Here are some instructions on how to do
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner). You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.) Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
Once you have the appropriate permissions and ownership if necessary, you should be able to delete the file normally or with one provided above both programs.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I lost my CD windows 7 Home Basic, can you provide me with the ISO file
I'm on PC assembled with i3 1st gen 3.07 GHZ processor Intel with 4 GB of RAM.
I put in Windows 7 Home Basic and have the activation key for the same thing but lost my CD. Can you provide me with the ISO files approved for her.
I had tried a lot of ISO file, but none worked mainly for basic Stater of Windows and home proplary. Is the ISO file or my PC is not supported with Home basic.
If Yes, then what is the solution.
Some of the links that I tried are
https://***.to/Windows-7-all-in-one-pre-activated-excellent-t7661549.html
Please help as soon as possible.
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
-
I use W8 for months and all of a sudden, while traveling, I can't connect to my computer. I get the error "your PC is offline.". Please sign in with the last password used on this computer. "I am sure that I use the password. I have a flash drive and another laptop (Running OS X) at my disposal. What should I do to access my laptop?I don't have access to my local network, or any network besides.I have not recently changed password. I can't restore or refresh because it requires the password and says that isn't true. I never installed webroot or anything of that kind.Results in the same number safe mode.I can't connect to my Live account with my phone just fine.I do not have a local account.It's ridiculous and absurd oblivion by Microsoft. I'll be away a network known for a week and have literally no access to my computer. I would like to take this opportunity to warn all users of Windows 8 to make sure that they USE LOCAL ACCOUNTS. DO NOT USE DIRECT REPRESENTS WINDOWS 8, BECAUSE IF THIS HAPPENS TO YOU AND YOU CANNOT CONNECT TO A WELL-KNOWN. NETWORK, YOU WILL BE LOCKED.I am aware that there are discussions on this topic, but I want to throw oil on the fire, so to speak, because as far as I know, there is no solution.
* EDIT *.
The only solution is to connect to a known network. If you are not able to connect to a known network, you can not connect, simple as that. It's a big bug for sure. I repeat, change your account to a local account to avoid this problem.So I solved this problem, but unfortunately, it was as bad as I thought. As I thought, you need to connect to a network "Known", and then try to connect. It should work. If you are not near a network known (as if I was), as far as I know, there is no solution. To avoid this, change your account to a "Local" account
My theory for the problem is the following:
When you connect using a Live account, the password is saved locally and on the network. If you are connected to a network, it verifies the password that you enter the password stored on the network. If they match, it will allow one, sign in. If you are disconnected from the network, Windows attempts to match the password online, realizes he cannot, then checks the local password. Somehow, in my case, the password locally must have been changed or deleted and so the password entered always was "Incorrect."
So yes, big problem, I'm sure the solution is quite simple, but in the meantime, use a local account to prevent this. I was stranded, and it was a huge headache and cost me many hours of work. -
OT: locked out of my laptop.
Hello, I have an Asus with Windows 8, and last night my friend locked me out of my laptop by pressing on enter far too often. Now I can not connect on my laptop. Whenever I get my password it says "your PC is offline.". Please sign in with the last password used on this PC"and I really need to get inside because I have a great duty that I have to finish and return. I really need help.
Hello Tiana,
Thanks for posting your query in Microsoft Community Forum.
Of course, I understand the feeling of being locked out of computer especially when you have something important lined up.
In this scenario, you perform Refresh if you have Windows 8 DVD with you.
How to refresh, reset or restore your PC
Warning: Apps that you have installed Web sites and DVD will be removed. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
In case you don't have a disc, you can contact Asus that can help reset the computer to factory settings.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Thank you.
-
Is it possible to store parameters to script with the InDesign file?
Hello
I have a crazy idea: it is possible to store parameters to script with the InDesign file?
In this case the Scripting Guys will be able to store these settings with the file, and when the script runs - he can check if those setting exists - if so - script can run without showing the dialog with the settings... (like all the necessary parameters are stored with the indesign file), and of course we can force InDesign to display the script dialog parameters if run us with the alt/option key pressed when executing this script. Maybe even different scripts will be able to share these settings and interact with each other... We will be able to have the settings will be saved with the file, or temp settings for the document assets or session (till InDesign is closed). With eventListeners and commissioning, scripts, that we will be able to make scripts that would be able to check updates and automatically run when we placing images and text and so on... This can be a set framework of InDesign scripting, allowing to write scripts that use ui and same libraries so we don't have to write everything from scratch every time and just included required libs...
So here are 2 great questions for now:
(1) is it possible to store script with .indd file settings
(2) who is interested in creating InDesign scripting (because it only makes sense if it will use a lot of people)
PS: I know that it is possible to store settings in an external file, but this time, I'm interested only to save the params with .indd
The syntax of the function to write the label:
app.activeDocument.insertLabel('myLabel', 'myLabelValue');
IMPORTANT: If you forget the name of the label, the label is LOST! Really? YES, REALLY!
The syntax of the function for the reading of labels:
var myLabel = app.activeDocument.extractLabel('myLabel');
http://indisnip.WordPress.com/2010/07/31/saving-script-data-within-document/
-
Re-import L/r &; battery with the original file?
Re-L/r & battery with the original file import
Hi, need some help please.
After have exported them to an external editor for re - I want to import the image in lightroom, when I click on this option, prior to export (in re - import), it merely to send the image to the original folder not in the preview pane the long side of the Photo original/s and L/R so if I want to work on this, once again , I open the L/R folder and drag it into an external editor.
I've been under DISPLAY/SORT but don't no if any option to choose here.
Hope you understand the question
Thank you
RussSorted
If image does not appear in Lightroom, check that the Source film indicator and the menu does not appear "previous import." If you have switched to "Previous import", access the menu, and then select all photographs.
-
My links do not work when I combine another file with the pdf file
My favorite internal links do not work when I combine another file with the pdf file.
External links continue to work properly, though.
It makes no sense to me at all... but I hope that one of you kind folk can help?
With the tool link in Adobe Acrobat, you can edit the links or create new links.
-
problem with the Finder - files and folders displaying incorrectly
After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).
This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.
Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.
I decided to do a clean install of the operating system but nothing works.
Is there some setting in Prefs I'm missing?
Hi there highland99,
Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.
Thank you for using communities of Apple Support.
Maybe you are looking for
-
Unable to access SMU-7962R + OR-5734 in LabVIEW
Hello I have already developed a SMU system that uses FlexRIO. This has worked well. FlexRIO devices appear in MAX OR as follows (note that FlexRIO modules have yellow icons of FPGA, and their adaptation modules are shown): I'm now trying to build an
-
OfficeJet Pro 8600: Printer running on MacBook Air - Yosemite
After having been able to print from my MacBook Air, I get now I checked the printer the printer "printer in use" message and it is usable by my MacBook Pro. Any suggestions?
-
I have computer vpceb26fg laptop sony vaio. The last time I have shut down my pc after seeing the movie, I heard some unusual noise from my internal hard drive.After listening to the sound, I closed the pc, the stop was slower than before. The next t
-
BlackBerry Smartphones cursor problem
My Web slider does not work? When I go to google.com for example, my cursor allows me to click in the search bar, but when I click on "search", it won't let me. It is the same for all sites. I can't "click" on the links or anything. Anyone know what
-
Hallo I have a cisco router from 1721 to LAN-to-LAN and Internet access. The WAN link is EN PVC two one for LAN-to-LAN and Internet. On the LAN-to-LAN PVC we must apply the VoIP so I would use LLQ, other features QoS and CEF (Cisco Express Forwarding