I forgot administrator P/W may still be the defailu factory

Similar Questions

• I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. Ho

  I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. How to do the update?

  Direct updates
  -----------------

  https://www.Adobe.com/downloads/updates/

• I forgot my password.so administrator how to have to remove the password

  I forgot my password.so administrator how to have to remove the password

  I forgot my password.so administrator how to have to remove the password

  Here are the usual methods to solve this problem:

  • Restart the computer with your CD to repair Windows, then use system restore to set Windows in a few days (only works if the problem occurred recently).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).

• Adobe AIR - will not update - error. "Please contact your administrator. There may be a problem with your SMA *.

  Former title: adobe AIR

  I disabled adobe AIR updates made, because every time he did it would download additional programs that I didn't and it was sometimes difficult to roll of them. I thought that my computer started to act funny then I changed it back to make updates and that's when it started, it will not update. * Error. Please contact your administrator. There may be a problem with your SMA *. It won't let me uninstall it even. I tried to * run as administrator * also, none of this seems to work. I talked with a technician from best buy to the cat there, he mentioned a virus, but they want, of course, a very pretty penny to help. He also told me the program or software is not crucial. I did read threw some of the suggestions that have been posted already, but a lot of it seemed to be another language for me. I'm usually not too bad with this irritable stuff, but I found it confusing. Other than that, I get actually to the point of my computer completely wiping everything and starting over.

  Installer advance user as http://www.revouninstaller.com/revo_uninstaller_free_download.html
  andthe problems with programs that cannot be installed or uninstalled

  In addition to contact
  http://forums.Adobe.com/Community/air

• HP 15-1039wm: forgot administrator/power on password

  I forgot my password on. Deactivation of the system 70795949. Can someone tell me how to get around this?

  Hello:

  Please see this link...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/m-p/5010033

• Impossible to change the administrator password or log in to the administrator! (CF10)

  So as the title says, I can't connect to the administrator and change the password through Coldfusion10\cfusion\bin\passwordreset.bat doesn't seem to be actually change the password because I always get the "invalid username/password" when I try to log in after resetting the password.

  Further, I used the old method of changing neo - security.xml and changed 'admin.security.enabled' to false. This allowed me access to the administrator, but even in this case, when I activate the password protection and reset the password of the administrator, I am still unable to connect!

  A detail that may be a clue to solve this problem: when installing CF, it has been fixed to not use the default username "admin". When I try to open a session if I try with "admin" and the username is personalized with no luck.

  Any ideas on how to solve this problem? It seems that the password encryption system is broken and store the hash of password reset evil or something...

  EDIT: I forgot to mention that I have to restart the service after the reset of the password.

  Here are possible solutions, you can try: -.

  • Try another browser (problem occurs mainly with IE).
  • Try another address http://127.0.0.1:port_no/CFIDE/administrator/index.cfm or http://localhost:port_no/CFIDE/administrator/index.cfm or http://ip:port_no/CFIDE/administrator/index.cfm.
  • Try the passwordreset.bat, then try again with the same ip address or the IP loopbak.
  • Try a different server and remote access to the server http://ip:port No.
  • Select the port internal/built for ColdFusion and then try to http://localhost:8500/CFIDE/administrator/index.cfm, where the 8500 is the internal port to ColdFusion.

  Note:-a restart of the application server ColdFusion to allow port internal/built would be necessary.

  Here's a similar thread ColdFusion 11 fresh install Administrator Login does not there is place for ColdFusion 10 as well.

  Kind regards

  Anit Kumar

• Can you still find the 'theatre' on a song?

  I remember back when iTunes was relatively young (around 2006) allowing you to be able to read how 'theatre', a song in your iTunes library and you may even sort the pieces by the amount of plays. In addition to the playlist 'Top 25 most played' (which still does not specify how many times each song has), there is no indication I can find to match this feature. There are still hidden away somewhere? Y at - it another way? Thanks in advance.

  When in mode of song list, right-click on any column heading, and then select time to add this column. You can drag it anywhere and you can use it to sort.

  Method ALT: iTunes > View menu > options > check box all of the columns you want to see.

• How can I get xp system professional replacement cd. I broke mine, but still have the product key

  I broke mine, but still have the product key and product id #. can I buy a replacement of microsoft cd.

  http://support.Microsoft.com/kb/326246

  Replace Microsoft software or hardware damaged, defective, or lost.

  To request the replacement of hardware or software, contact the Microsoft Supplemental Parts team at the appropriate number provided in the section "contact information". You must be in possession of the product (if it is damaged or defective) and be able to provide proof of purchase. Service representative customer will notify you of any costs of replacement or shipping and handling fees that may be charged. If a product is no longer under warranty, the replacement item may no longer be available.

• I created a new administrator user account that has replaced the original one. Now I can not access my old files. What can I do?

  Windows XP Professional

  I found that will help you solve your problem, the original instructions have been written by Shenan Stanley   Posts: n/a

  Re: Main administrator account appearing not If you can connect with the new account that you created (which should be an administrator account as well) then go directly to step 2 below. I suppose that you use the administrator account as your main account (bad idea anyway) and that means that you probably have Windows XP Professional * and *. somehow enabled the guest account or create a new account - or installed some patches that created a new account - as .NET. I guess also that (since you say "appear") you also use the 'Welcome' screen opening of session instead of the classic logon. (1) restart the system. Press CTRL + ALT + DELETE twice on home screen. Type in "Administrator" (without the quotes) as the username and do not put in any password and logon. Work? (2) or follow the instructions below to add the administrator account of the Welcome screen * or * download/use TweakUI to choose that is visible on the screen of welcome and even set automatic logon if you want. How to add a user to the Welcome screen logon page: ------ 1. start regedit.exe (start--> RUN--> REGEDIT--> OK) 2. navigate to: HKEY_LOCAL_MACHINE NT\CurrentVersion\Winlogon\SpecialAccounts\UserLis t. 3. on the Edit menu, select new, DWORD value. 4. type administrator as the name, and then press ENTER. 5 double-click on the new value it the value 1 and click OK. 6. close the registry editor. The administrator account will now appear on the Welcome screen. You can use These same steps to control other accounts listed on the welcome screen. The value of the registry value to 1 to display an account or account 0 for hide an account. For example, to hide the user Bob account, add a value named "Bob" in the registry key identified in step 2, then set the value to 0. You can do the above with the Microsoft TweakUI PowerToy. http://www.Microsoft.com/windowsxp/d...PowerToys.mspx ------ Automatic logons: ------ Method of Microsoft: http://support.Microsoft.com/kb/315231 Method 2 of Microsoft: TweakUI for: http://www.Microsoft.com/windowsxp/d...PowerToys.mspx control userpasswords2 method: (1) go to the Start Menu and run the box. (2) type the following: Control userpasswords2 Now click on OK (3) in the new Windows that appears select the account you want to make the opening main session. Now, uncheck the box "users must enter a user name and password... ». (4) hit apply and a dialog box will appear asking you to confirm the selected user password. Click OK when you have finished... ------ I hope this gets you where you are wanting to be. It's a * good * thing in the field of the user to: (1) have strong passwords. (2) have more than one account to administrator (with strong passwords). I know - you are the "only one who lives there, the only person who uses your. computer'... etc. Large. When your House is burgled and computer

  
  stolen (physically or virtually)<- you="" may="" be="" thinking="">
  Another thing, like ' all my (the only person who lives here, the only person who).
  Use this computer) documents, pictures, e-mails, financial information, updated in cache
  Passwords, contacts, etc... are on this computer. »

  But it's an individual choice. You get to evaluate risk. =)

• I'm trying to install Quicktime / itunes, but I still find the icon indicating that there is another ongoing installation. I tried to see what the installation is still ongoing, but have'nt found nothing. Help please..!

  I'm trying to install Quicktime / itunes, but I still find the icon indicating that there is another ongoing installation. I tried to see what the installation is still ongoing, but have'nt found nothing. Help please..!

  Hi JDSoor,

  Thanks for posting. Two or more instances of the service Msiexec.exe cannot be launched at the same time for two different products. An install or repair processes should finish before the other process can be launched. Go to processes in the Manager of tasks (so press CTRL ALT + DELETE) then press the processes tab and look for to MSiexec.exe and press "end process." You may need to do more than once.

  I hope this helps. Let us know if this or do not resolve your problem.

  Thank you

  Shawn

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support

• When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  original title: quick search

  When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  Hello
  
  1. it occurs when you use a particular application or all applications?
  2 have you tried to use a different keyboard?
  
  Method 1.
  Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.
   
   
  Method 2.
  If the problem persists using a keyboard screen ion then run the sfc scan and check.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Has conducted an assessment of WEI, and, the window according to the analysis is complete, but progress seems to be about 95% and wrote "this may take a few minutes. Your screen may blink during the process.

  Original title: WEI

  I recently did a full scan of the system with all the tools available and used windows manufacturer to scan the hard drive, HARD drive program. Everything is cleaned up and updated. I conducted an assessment of WEI, and the window said the analysis is complete, but advances seem to be about 95% and wrote "this could take a few minutes. Your screen may blink during the process. "It was about 20 minutes so far and the box on the bottom, said"Cancel ". I'm going to be it, but ask yourself what can be the issue. Any help/ideas would be appreciated.

  Yes, I think that he / she forgot to mail the scanner :)

  The link I posted has a Mr. fixit for me on this matter use you it?

  You can scan with mbam free :/

  https://www.Malwarebytes.org/antimalware/

• I did a factory restore and still get the blue screen message.

  Separated from this thread.

  I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8004A7E1D8
  BCP3: 00000000B 6000000
  BCP4: 0000000000010015
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050515-27159-01.dmp
  C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi papreps,

  Thanks for posting your query on the Microsoft Community.

  As the posts above mention, the problem comes from your drivers.  Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.

  I suggest you to download and install the latest drivers from the manufacturer's Web site.

  Try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  , Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.

  Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.

  Keep us posted on the State of the question, we will be happy to help you.