I get a disk hard disk at the end of my slider and my tooth blue mouse and keyboard are inadmissible
I have a Toshiba Tecra M7 tablet. It works with Windows XP Professional. It was working fine until yesterday and then the Blue Tooth keyboard and mouse becomes inadmissible. It works with the keyboard of the LT and pointing the finger, so the system is OK but the keyboard and mouse (the two blue tooth) do not work and I get what seems to be a drive leading the pointer?
I also tried to use a hard wire on the USB mouse and it does not work either. I use a dock and a powered USB 4 port hub.
USB port may stop working after you remove or insert a USB device
Method 2: Run the troubleshooter from the link given below and if that helps.
Tags: Windows
Similar Questions
-
Is it possible to get physical disks for the version the creative cloud Lab?
Is it possible to get physical disks for the Lab (lab license) of the creative cloud version? Download times to download most of the following CC are crazy. Physical disks would be useful.
It is possible to obtain copies of DVD of installers of regions with poor communications infrastructure. Please contact your Account Manager, dealer or contact Customer Care - Adobe Support
-
I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.
Thank you!
A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!
-
I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect. I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC. Any help is greatly appreciated. One of my original case numbers were: 0216572509
You need installed Adobe Creative Cloud. Check the link for more information below.
-
I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?
Do exactly what the message says, and it will go away.
-
Original title: dissolution - log jam - sounds 20 seconds before WMP 11 goes from the current track to the other.
Windows Media Player 11. 20 seconds before the end of a track, and if there is another track to come, the sound cracks, skips, breaks upward. A check in the Task Manager indicates that only when that happens all of a sudden the wscsvc service uses a lot of cpu. All of a sudden, the problem occurred two days ago. I had no explicit amy changed security - but standards updated Windows and McAfee took place.
As expected Windows difficulty he finds no problem.
Hi Janssons Frestelse,
Good to know that you were able to resolve the issue and I thank you for updating the same.
About the audio driver, you can try uninstalling and reinstalling the sound card and check.
a. Click Start and type devmgmt.msc, and then Enter.
b. expand sound, video and game controllers.
c. right-click on the sound card and choose uninstall.
d. restart the computer and check
You can also check the manufacturer's website and try to download the latest verion of Windows Vista audio drivers and check.
Check out the link:
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
Concerning
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you
Hello
Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.
You can do it from the control panel as well.
This would make CD player as default PDF Viewer.
Concerning
Sukrit diallo
-
Cannot open the file PDF as computer Mac tells me to accept the end user license agreement and to relaunch the browser... How can I do this? URGENT!
With closed drive, open your Applications folder and double click (left) on the drive icon.
-
How can I launch Adobe Reader.accept the end user agreement, quit and re-launch the browser?
Go to Launchpad, find Adobe Reader, double-click it.
- The movie will stop playing at the end of each slide. I record a movie, and the registration process seems to go ok. However, when I play the movie, it stops at the end of each slide rather than move to the next slide automatically. Can you tell me where I'm wrong?
-
How can I get foxfire after that is at the end of my icons down?
I've always had icon foxfire at the end of my bottom of my screen. For some reason, he disappeared. Can you help me?
Thank you, Doug-What is the icon in the Windows taskbar?
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
-
My daughter use XP on a netbook. She booted up ealier today and everything that it was red. The wallpaper image is pixelated, its icons are pixelated, there is a very long delay in obtaining different windows open, we are unable to access assistance help from his computer and go on the internet for more than 4 seconds is blocking the entire system for about 5 minutes. We have tried to update the video driver, change resolution, scan disk, make the necessary updates, the soft start and starting difficult. We have even uninstalled everything that was not essential to power his computer. Nothing works. Help, please.
Hello
You did it all change in software/hardware on your computer before this problem?
I suggest you try the methods below.
Method 1: Since the problem started recently, try to perform the system restore.
Reference: http://support.microsoft.com/kb/306084Method 2: Uninstall the driver from Device Manager video card and reinstall it.
Steps to uninstall from Device Manager:
a. click Start > click run.
b. type devmgmt.msc and press ENTER.
c. now locate card video/display adapter and right-click on > selectUninstall.
d. restart the computer this should install it the appropriate drivers for it. You can also download the latest version of windows XP drivers from the manufacturer's Web site and install it.Reference:
http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/finddrivers.mspx
http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02october14.mspxMethod 3: Check if the problem persists in mode mode / safe network (step 1). If the problem does not persist in mode mode / safe with network then, perform the clean boot (step 2) on your computer.
Reference:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
http://support.Microsoft.com/kb/310353Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Re-enter the key of W7, but my mouse and keyboard are not active?
Hi guys when I turn on my computer now, it sends me directly on a screen where it asks me to re - enter the key of W7, I I try this but recognized the tRNA of the mouse and keyboard. After about 2 minutes, it goes to a screen where it says "this copy of Windows not genuine."If you can shed some light on how to get the mouse and keyboard to the rear, it would be great.
Thank you!
Have you tried to connect the keyboard and mouse to different USB ports?
Is it wireless or wired keyboard and mouse?
You can always re - enter the product key when you reach the office by following these steps:
Press Windows key + R
Type: slui.exe 3
Press enter
Enter the product key and click next to activate via the Internet.
-
loop running only when the mouse or keyboard are active
Hello
I started a few weeks ago a pretty big VI. Most of the program is included in a large loop. But I feel it's to slow down unnecessarily. So to optimize it, I would like that the VI only works when the mouse or keyboard is acting on it. It would free up the CPU when I do not use it without having to shut it down. I found on the internet how to use the "wait for" to slow down the loop, but in doing so, some parts of the VI that must run in real time also slow down. I think that my idea should be more effective as well for applications in real-time and to free the memory.
Accordingly, how can I ask the while loop to skip to the next iteration only when you press the mouse button or when a field is filled by the keyboard? Or is there an alternative for the while loop?
Thank you
Isaac
Hello
You can check this by using the structure of the event and monitor the activities of the mouse and the keyboard.
I have change a simple VI to show this, please see the attachment.
In the meantime, you can consult this example available on ni.com
http://zone.NI.com/DevZone/CDA/EPD/p/ID/3924
Kind regards
Lou KwokHow
AE OR Singapore
-
After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.
This happens in safe mode for.
The PC is a Sony Vaio laptop.
Any suggestions,.
John
Hello Orwell,
Thanks for posting your query in Microsoft Community.
You have a Windows 7 installation disc?
As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.
Startup Repair: frequently asked questions
If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
Maybe you are looking for
-
I can't scroll through sites that I connect. something happened in Firefox Mozilla. He used to work when I am connected to a Web page, but not now. all I can do is to manipulate the page through links on the page. No sidebar to scroll or the other. I
-
How can I update the password for GMAIL on MAIL
Security measures, I recently updated and changed my gmail password. On my mac mail where my gmail is set to receive new messages stopped on the upper right corner, it says "failed to connect". Because the password has changed I hope, but there is no
-
I am trying to access my mail and I wonder to check that the user name and password are correct for my mail server. I don't remember. How to solve this problem.
-
BlackBerry smartphones can not remove old Messages
I have messages in my list of message since July 17 & July 18. They originated via the server of the company at my previous job. Even though I worked there again, I was never able to delete. What I notice is different from deleting the other messages
-
Delete the business rule on the list of planning application business rules
Hi allIt is Hyperion planning 11.1.2.3 500, Classic application.The business removed from the calculation Manager rule is not available in the calculation Manager but still available in the list of planning application business rules.Any suggestion i