I get a message to run chkdsk and chkdsk will not get to 62% and then goes no further

Similar Questions

• Trying to connect my laptop to the internet and I get the message "validation of identity and then it is not connect."

  I'm trying to connect my internet to my laptop but its does not work (it is a new connection). I tried it on my other laptop and password have crossed (the computer on which he worked on had vista). In addition, he worked with other computers in the House. I get a message of identity validation and then it is not connect?

  original title: internet connection failure

  Hello

  Do you mean that you try to connect the wireless access point? Try to install Service pack 3. Also what you can check:
  Click Start-> settings-> network-> right click on your adapter connection-> properties-wireless => select Wireless (tab)-> select your (name) wireless access point->, then select properties-> click on authentication-> uncheck the "802.1 x authentication for this network" click ok on all screens.

  Restart your computer and try to reconnect.

  I hope this helps.

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• At the start of office shows icons and then goes to a blank white screen. I have Vista Home edition

  When I turn on my Dell Inspiron with Vista Home preinstalled desktop PC; the system starts with the desktop icons and then goes to a white screen, absolutely nothing to click on display. I hit control, alt delete, then to display the Task Manager. I click on the Task Manager and the display shows nothing is running. now the taskbar displays the shortcut at the bottom of the screen icons. I then click on the desktop at the bottom of the screen icon and mode full-screen displays a complete picture, including the background with the regular complete icons. Why this happens, and how not to eliminate the white screen after starting? The Task Manager does not fix this.

  Native: Problem solved! My computer flashed a Message automatically asking me to update 'Safemode Dell Now. So I said yes, and the update took about 2 Minutes. Everything seems to be OK. I appreciate enormously the support you offered, and say... THANK YOU for your help. Kind regards... Frank 2468

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Im trying to uninstall Microsoft Office Click-to-Run 2010 (beta), it will not uninstall in my computer.

  Im trying to uninstall Microsoft Office Click-to-Run 2010 (beta), it will not uninstall in my computer.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the message ieframe.dll unresponsive and then internet also said Internet Explorer doesn't work don't not again and again > how to fix this.

  When I received the message on the screen ieframe.dll does not also Internet Explorer announcement that is not responing. I don't have any idea how to solve this problem, or why it happened. Can someone help me?

  Hello

  You use Internet Explorer to surf the internet?

  Follow the steps below and check if that helps

  Method 1:

  I suggest you to optimize IE using the steps below.

  updated 1: clear cached data in Internet Explorer

  1. open Internet Explorer 8.

  2. click Security and then click on delete browsing history.

  3. to remove the historical area of navigation, click on delete.

  2: reset the security settings for Internet Explorer

  1. open Internet Explorer.

  2. click on tools and then click Internet Options.

  3. click on the Security tab.

  4. click on restore all areas by default level, and then click OK.

  For more information visit: How to optimize Internet Explorer
  http://support.Microsoft.com/default.aspx/KB/936213

  Note: Resetting the Internet Explorer will change all of the settings that you made earlier, and it cannot be reversed.

• Halo: Combat Evolved for PC works only on Windows Vista - Error Message "" unload the debugger, and then try again."

  I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.

  Does anyone have any suggestions as to why the game does not work for me and how can I make it work?

  Let me know, thanks. :)

  Hello whyohwhy42,

  I suggest that you follow the section below. This includes various possible steps to solve this problem:

  http://support.Microsoft.com/kb/812759

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Volumn bitmap is incorrect and chkdsk will not end

  When you run chkdsk /F it stops working at the end of 35% step 5.  My hard drive is defective?

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  See you soon.

• Satellite 2410 603 run diskcheck and then turns off after startup

  When I turn on my PC it runs a check disk and tells that the following file is not valid: windows/prefetch\matcli.exe-061DBA
  After the disk check, it starts up to the main screen and then stops as if I had pushed the power switch.

  Is there a way to solve this problem without the recovery running disk (and thus losing all my data)?

  Hi guy,

  MATCLI. EXE is a component of AOL Broadband and is usually optional (i.e. it is not necessary to run Windows).

  The PREFETCH folder is from which your laptop try to play the file. It is an area where Windows stores copies of files that are usually loaded during the start-up phase, so that they can be pre-loaded in the cache, which allows Windows to start up more quickly.

  It is advisable to clear the contents of the PREFETCH folder on a basis regular (Microsoft recommends a monthly purge of prefetch contents), but you can just delete the folder PREFETCH itself since Windows will allocate a new start-up.

  Since you can't actually start Windows to delete the PREFETCH content I suggest that you try to start your laptop in 'SAFE' mode, since this will only start with the minimum of Windows files. If this succeeds, then delete the PREFETCH folder before you try to start Windows normally again.

  As a final thought, it might well be a corruption on your hard drive for some reason any and it would be a good idea to run a utility to check hard disk in order to assess the State of your hard drive (using CHKDSK from Windows or a third party utility such as Norton Disk Doctor).

  Kind regards

• How can I get beyond Darwin appear on my screen. i book g3. has not been started over the years and when I try towers for always (like 1-1/4 (h) and then goes to a black sceen of darwin. I tried to boot from the disc, but I it won't let me see the hard dr

  My son tried to update the OS and now it will not be in service in any OS. Does not see the hard drive. But after the spin cycle for more than an hour, it goes into the black screen Darwin/BSD (my-name - Computer.loca) (console)

  Login: IOATAController buses blocking device.

  I tried to boot from the OS disk and may not see the hard drive to load to. I even used disk utility to erase all hoping to make just a re-install.

  Did he talk about Darwin?

  Also do not know if she had 10.2, 10.3 or 10.4 charged thereon.

  If the HARD drive is not visible in disk utility, then he is dead and must be replaced. When you start the computer to the disconnect is that the operating system cannot find a reader from which to load the OS. The last iBook G3 came with 10.4.11. The first iBook G3 came with 10.3.9. Many models of iBook G3, so I don't know what version of the OS is the minimum requirement for your.

• CHKDSK will not end

  Original title: scandisk will not work

  When I try to run scandisk on my pc with windows 'XP Home' he begins and then said scandisk overturned and continues to boot up how can I fix it so it can check the hard drive? Help, please

  Thank you for the 2 answers when I follow the instuction of Micorsoft support on how to run "chkdsk" element 315265 doesn't he finds so many errors it says "chkdsk cannot continue in read-only mode" and when I try to run "chkdsk volume: / r" to allow repairs its says "the drive, the path or the file name is not valid" I even tried running "chkdsk volume." ': / c ' where 'c' what my hard drive.  Regarding article 310747 it ran but did not fix the problem.  When I turn on my computer, I get the blue screen saying: it is strongly recommended that I have let the scandisk to check the disk for errors, but then he says "scandisk has be cancelled" and contiues to start.

  Thanks a lot for the replies, but I need help.

  Hello

  I suggest you try to run the System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  Also check out this link:
  http://support.Microsoft.com/kb/315265

  It will be useful.

• recurring message on the entry owner program - will not stop after reinstallation of C4480

  Since I had to re - install the software for my C4480 I continually get messages on the screen asking if I want to participate in the program of user input.  No matter if I accept or refuse, he returned again and again, to infinity.  I tried several things to stop this and have had NO success.  I'm under a system i3 with 8 GB of ram and Windows 7 Home Prem 64 bit with SP1.  I hope someone can direct me to a solution.  He drives me crazy!  Thank you!

  Dave223Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with the participation of the user program pop ups. I would say by completely removing the software, using a L3 uninstall. If you have any questions, I've included the following steps:

  -Load your driver CD and go to the directory util\CCC on the CD
  -There should be a list of batch files
  -Run the uninstall_L1.bat
  -Run the uninstall_L2.bat
  -Run the uninstall_L3.bat

  Once the software has been deleted, I would suggest to reinstall the HP Photosmart C4400/C4424 all-in-One Printer series full feature software and driver.  Once you download and run the software, it wil give you an option of customization before installation.  Deselect everything, but the printer driver, and then install.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• CHKDSK will not stop. When re-starting pc it goes back into the chkdsk command. When I try to boot in SafeMode (f8) happening in chkdsk. In addition, the CD/DVD does not work so I can't reinstall XP.

  After installing windows update was the CD/DVD drive on my Dell desktop computer was not recognized.  I downloaded drivers from Dell.  My pc has stopped and went into blue screen mode.  I don't have the error codes.  I got into safe mode and tried to run chkdsk.  Now, it is in a loop constant chkdsk.  It restarts automatically and run chkdsk again.  I interrupt to start safe mode by pressing F8, it gives me all the options of safe mode.  But after I selected one, it goes in chkdsk again and repeat the cycle.  In addition, given that the DVD drive is not recognized I have no way at this point to reload XP.  The only thing that I have access to are 'start-up' and 'set-up '.  I can change these settings, but so far nothing that I changed it helped.  Thank you!!!

  kag187,
  You need to access your BIOS (usually like F2, F10 or Delete at the moment it starts to boot, I must say on the screen).  Then set your boot order to boot with the CD player.  Then boot the XP disk.  If your system is not to see the player you have a hardware problem and nothing did\could from Microsoft, which would cause.  If the BIOS does not see your drive then ck with your OEM manufacturer for a firmware update or a new disk.

  Good luck QQ learn to deal!