I get a svchost.exe. application _ error help me please

Similar Questions

• svchost.exe.application 0x7d4caa9b error code.

  has a few viruses.deleted a few things result in program files 'system volume information, cookies, Hello, LxKx85 '. and perhaps other files deleted. Did a reboot and after that, can not go to the internet.and also launch have sound either. Thank you

  Everything you deleted had nothing to do with the infection. To clean your computer (which is probably still infected), go through the steps of analysis detailed in the links below. Do not skip the preparatory work. To fix what you broke inadvertently deleting the wrong files, reinstall the drivers for the network card and the sound card. See the end of this post to find out where to get the drivers. Note that many variants of malware change connections in Internet Options to a proxy go to control panel > Internet Options > Connections tab > LAN button and if the corresponding checkboxes in the Proxy Server section are checked, uncheck the.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• At startup I get this error Message = "error in svchost.exe - application instruction to memory 0x7c919af2 who 0x00000010.the memory could not be written."

  Windows XP

  At startup I get this error Message =

  Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.

  What should I do about it?

  You don't need to "try" things - you need to "do" things:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read"

  Hi, I get the error message after my system boots - svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be "read".

  And then after a few minutes it stops and restarts.
  I'm also not able to use the mouse.
  I need help with this problem
  Thank you and best regards

  Hi GeorgeMotaung,

  ·         Did you do changes on the computer before the show?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Start your computer in last known good configuration.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Svchost.exe - application error... help

  I receive the following error message at startup, when I connect.  If I complete the program my computer going to be inadmissible.

  Svchost.exe - application error.  The exception of integer division by zero. (0 x 0000094) occurred in the application at location 0x001a3fe2.

  Click OK to finish the program

  Click on Cancel to debug the program

  Nothing comes up on my anti-virus.  Any help would be appreciated.

  Hello Scott, I did some research on this and found this site, don't know if they fixed the problem is related to your but you can see if the process will help. I found this on PC * Web site:

  http://www.pchell.com/support/svchosterror.shtml

  I'll do some looking and see what I can find.

  It is permanently associated with a start-up program, I would like to go in safe mode after you start in Windows, go to start then run and type msconfig. Once in the config window go to the Startup tab and uncheck all the boxes that are not essential to the system. You do not uncheck anti-virus or your spyware / malware removal software. If the system starts fine then go back to msconfig and start checking one box at a time until you get the error again. The last program box checked is the culprit and should be removed and put back in place.

  Hope this helps, Jim

• Svchost.exe Application error - education @ 0x7c923845 referenced memory @ 0x00000000 could not be "read".

  error message - Svchost.exe Application error the instruction at 0x7c923845 referenced memory at 0x00000000 the memory could not be 'read' there are 2 choicesclick Cancel to complete that freezes the whole system must make a start/stop hard ouCliquez Cancel to debug and still freezes system. I noticed that I can move the notification almost window off the screen from the road and still be able to use the system, as long as I do not click an option in the error message window.

  I ran M/S FiX IT, M/S, Malware, Avg free antivirus essentials, Oldtimer, Iobit and nothing found something: of course these have not been loaded on the system at any given time. I'vd sought a malware, viruses, spyware, what is causing this and nothing

  How can I get rid of this? A malfunction of the malware/Adware/Virus/system or what it is?

  Hi stallman0419,

  When exactly do you get this error message?

  You can follow the steps mentioned in the articles below which deals with a similar question

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  You receive an access violation error and the system may appear to hang when you try to install an update from Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/927891

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Svchost.exe - banner of error application the instruction at 0x5ba0ddae referenced memory at 0x00000000.

  Svchost.exe - banner of error application the instruction at 0x5ba0ddae referenced memory at 0x00000000. The memory could not be written.  Banner returns after you press ok to complete the program and cancel without debugging.  Machine will not now stop down. Tried system restore to previous date does not resolve.  Some applications work, that some do not, machine shuts himself often.  Windows Update will not work.  Operating system is Windows XP media center edition with Service Pack 3.  A short of ideas.

  It seems that my hard drive is faulty and it is originally this and quite a few other questions, I'm going to change and upgrade the operating system.  Thanks for the help.

• Svchost.exe application error the instruction at "0x001a6f95".

  Svchost.exe application error the instruction at "0x001a6f95" referenced memory at "0x000000c".

  The memory could not be "read".
  Safari.exe - application error
  the instruction at "0x00276f95" referenced memory at "0x000000c". the memory could not be "read".

  Hello

  · When you receive this error message?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · Do you remember any changes made on the computer before the show?

  · You have to install automatic updates on the computer?

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  See: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

• Svchost.exe - application error the instruction at "0x001a61ae" referenced memory at "0x00000000".

  How to fix the svchost.exe application error

  the instruction at "0x001a61ae" referenced memory at "0x00000000".

  Hi KarenBlank,

  · When you receive this error message?

  · It is when you work with a program or a particular application?

  · Or is it during the installation of update?

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  You can check the link below: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

  If any malware or virus detected on the computer activity, run also, check and online virus scan. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

• I get the message: "svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read."

  Original title: svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read.

  error svchost.exe - application

  the instuction at '0x001a3ae7' referenced memory at 0x00000000 the memory could not be read

  Click ok to finish, click on Cancel to debug

  No matter who I click it freezes my computer

  How can I fix it?

  This error is as malware... Hmmm.

  Try this malicious tool by MSFT remover:

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  Also, I found a little interesting tool:

  How to determine which services are running under a SVCHOST. EXE process
  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  THIS should give us a LITTLE more information.

  Young people and learning... Have mercy

• Svchost.exe - Application error... Help please

  Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".

  Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?

  Svchost.exe is needed to start the required DLLs for Windows Services.

  Follow these steps and post, that things have "disabled" in the title of the status column:

  1. click on start

  2. click on run

  3. type services.msc

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Boot errors-'explorer. EXE application Oxc0000005 error. "

  I just got this when I restarted my netbook explore. EXE application Oxc0000005 error, then I went into safe mode and tried to have MS Search on my computer and received errorOx8007043c

  Hi Joseph,.

  Download and install the package update available on the following link to resolve the problem:

  Error message when the Explorer.exe process crashes on a Windows XP SP2 computer: "STOP 0xc0000005".

• Unable to open the program. I get this: lightroom.exe - application error: the application could not start corrrectly (0xc000007b). Click OK to close the application.

  Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »

  I use lightroom 5.

  Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error

  Kind regards

  Mohit

• Iexplore.exe application 0x079B0068 error - I need to turn off DEP for certain programs and services, but I don't know which. I can't open some favorite sites. Micorsoft advice is not to turn off Dep for all programs and services.

  Iexplore.exe application error 0 x 0790068 - I am told that I have to turn off DEP for certain programs and services, which?  I am unable to open some favorite sites from one about Microsoft Update 1 month ago.
  Simplify the answer please, I'm so confused and frustrated and have spent hours to get to this point that I am destroyed so solve my problem!

  Hello

  Do run this as a top list of verification at the bottom.

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.