I had a problem with windows 7 so I have 2 Toshiba disk for recovery in vista 64.

Similar Questions

• I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and he said to me: not val

  I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.

  where will be the second serial number?

  Help me please.

  Thanks, Abe

  Hi,

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Kind regards

  Sheena

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• I know that many have had the problem with Windows 7 check disk at startup and having to press a key within ten seconds... solution as a guest... but

  The command line does not work.  I am the administrator and it is automatically elevated command prompt.  I type CHKNTFS /X c:

  I get an error message: "is not recognized as an internal or external command executable program or Batch file" won't play with my registry.  Any help please.

  Thank you and all who responded.  It seems that the chk dsk is enacted by System Mechanic (which I think is an excellent program).   I learned, however, to run a command as administrator prompt.  I always started it with the command run and not as a typed command.

• Problem with windows 7 Professional-cant find a USB DRIVER for a DigiDrive ultra Addonics Pocket

  I plug my new Ultra Digigi card reader and it can't seem to find the right driver for this work.

  Any thoughts?

  Ryan

  RM

  Have you tried here http://www.addonics.com/drivers/

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Administrator password not accepted in the login window. had a problem with rogue program. How can I reset the password or login?

  Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.)

  How can I connect?

  Hi Annaba-m,

  Try the following.

  Step 1: Try to start in safe mode. Check if you can login as administrator.

  Step 2: If you are able to connect then try to change the password. Restart the computer in normal mode to see if you can connect.

  Microsoft Windows XP - overview of user accounts

  Microsoft Windows XP - Types of user accounts

• I had problems with windows live mail, I uninstalled it, now I have no e-mail at all, can you help me. I've been using windows vista

  I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista

  Hello

  You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.

  How to set up Windows Mail.

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  See you soon.

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Pavilion a1330n - problem with Windows Installer XP

  I had a problem with my computer and a little dialoge box popping up and saying ' Windows installed: preparing to install ' for a while now.  This window appears when I try to do something on my computer.  Is there someone out there who may be able to help me?

  Thank you

  To stop the error arise again, follow these steps:

  1 start - run - Type "services.msc".
  2. go to Windows install and then double-click Windows install.
  3. This will display 'Properties of Windows install' change to 'Manual' to 'Disable', for the ' path to the executable file: "and apply.
  4 restart the computer.

  Although I am an employee of HP, I speak for myself and not for HP

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think