I have a BLUE screen with an error that appears right before my computer shuts down

Similar Questions

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• Blue screen with an error: process1_initialization_failed "stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000).

  OT: Boot to Vista.

  Hello everyone,

  I have a laptop running Vista which is not booting to windows at all. I tried repair disk installation which stops at a blue screen with an error: process1_initialization_failed

  Lowest:

  Stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000)

  Y at - there anyone who can help?

  Thanks in advance :)

  Hi Nikita,

  Try the following link that will help solve your problem:

  You receive "0x0000006B" and "0XC000021A" Stop error message after you uninstall McAfee Agent 4.6.2 in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2:

  I hope this helps. Please let us know if you need assistance.

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• my windows laptop 8 is not start blue screen with an error message

  I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?

  Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.

  Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.

  http://us.Acer.com/AC/en/us/content/support

  If you have problems with Windows in the future, get back to us. We will be happy to help you.

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• I get a blue screen with STOP error: 0x0000008e

  Original title: blue screen error

  I have the blue screen error 0x0000008e (0xc0000005, 0x81e781a7, 0x8c92791c, 0x00000000) on windows vista and I can only boot into safe mode. I don't have the copy of vista because the computer came with it installed. I just ran recienly defender of windows on it offline and that's when it started.

  Hello

  I would suggest trying the following methods and check if it helps.
  Method 1:
  Start in safe mode and put the computer in a clean boot state, and then start in normal mode and check if the problem persists.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:
  Start in safe mode and then restore the system if it took place recently and check if it helps.
  System Restore: http://windows.microsoft.com/en-US/windows-vista/products/features/system-restore
  Warning: once you are restoring the system to safe mode you will not be able to undo the system restore.

  
  Hope the information is useful.

• I got the blue screen with STOP error: 0x0000008E (0xC0000005, 0xB9E28ABA, 0xAA319AE4, 0x00000000).

  Well that slowed down, repeatedly gets "blue screen" with code above.  Next line is:

  fltMgr.sys - address B9E28ABA base at B9E23000, DateStamp 480251da.

  Updating drivers did not help.  This t do?

  Need help

  Hi IsaiaAvraham,
   
  Here is an article that could be useful for:
  You receive a random "0x0000008E" error message on a blue screen in Windows XP

• blue screen with spot error 0 x 00000024

  I get a blue screen with the message "stop: 0 x 00000024". It will not even start in safe mode, keeps going back the same blue screen.

  Please give us the full error message.

  If it is a NTFS_FILE_SYSTEM error or if the Ntfs.sys file is mentioned, that he is generally an error of bad news.  If you're lucky, the Ntfs.sys file is missing and you can replace it easily, see here: http://support.microsoft.com/kb/822800

  If you are not so lucky, the file system is corrupted, use the Recovery Console and run chkdsk/r on volume... and cross your fingers, this terrible mistake ends rarely well!

  John

• Vista stops himself and goes to a blue screen with the error code debug_usb_code.

  Vista stops himself, and a blue screen appears with a debug_usb_code.  I have problems with windows shut.  Tried a restore point.  Finished in the configuration of the system and found that the windows Defender has been the origin of the problem at startup.  I disabled it, and the computer is now in operation.  However, it is slow, sometimes crashes after about an hour, it will be stopped by itself and give the code mentioned above on a blue screen error.  Then it will restart by itself.  Please help!

  Run systempropertiesadvanced.exe and in the startup and recovery section, click settings.  Then uncheck 'automatically restart '.

• Blue screen with the error 0X000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL.

  When I try to connect to the internet via my PeoplePC account I get a blue screen 0X000000D1 error Code and DRIVER _IRQL_NOT_LESS_OR_EQUAl.  I don't have this problem when I connect through AOL.  Is there a fix I can download to fix this problem?  My operating system is Windows XP Home Edition Service Pack 3.

  Yvonne

  Thanks for your help.  However, my security software tech Rep gave me a quick solution.  All I had to do was click on restore defaults for my security firewall.

• blue screen with the error of MEMORY MANAGEMENT. 0x0000001A

  Separated from this thread.

  Hello

  I have a toshiba satellite c870. When I turned on my computer, I got a blue screen by reading the following:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100% complete)

  If you want more information, you can later search online for this error: MEMORY_MANAGEMENT.

  Then it restarts and I get these 2 following errors of switching back and forth between the two sound tempting to prepare auto repair. See below:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: NTFS_FILE_SYSTEM

  Then he goes to the black Toshiba Logo screen as usual and reads the following:

  preparation auto repair...

  And then it goes to another screen blue read the following error message:

  (blue screen)

  : (

  Your PC has encountered a problem and needs to restart. We will provide for you.

  If you want to learn more, you can search online later to this error: FAT_FILE_SYSTEM

  He'll then return to the Logo of Toshiba screen, then the Blue error screen (NTFS_FILE_SYSTEM), then return to the Logo of Toshiba screen and then the Blue error screen (FAT_FILE_SYSTEM). It just keeps it again and again and does nothing else. I removed the battery, removed all caps, deleted all devices USB (mouse) and pressed the power button for 60 seconds. Then I put the battery in place, pluged in the power cord and it turned on. I got the same results, as shown above. NO CHANGE! HELP PLEASE!

  Well Vista and before "XP", usually, do not use the FAT32 file system, they use, as do the new OS NTFS.

  Vista/XP can read FAT32, & can / could use, but its outdated... Memory is not really in this case, but

  you too extended the hardware capabilities of the pc.

  From this point, try to start the BIOS, the value 'advanced settings' once this done, change BIOS for any add-on

  material, save & exit.