I have a hp envy 100 and have problems printing black and white. Print everything in b & w?

Similar Questions

• ENVY 100 and OS 10.7.1

  Hi all

  I have installed all updates for HP envy 100 and connected to the internet / wireless printing and scanning of Mac OS 10.7.1 successfully.  However when trying to scan from the touchscreen scanner, destined for 'Computer' selected none of the exposure of the Mac as connected upward (all computers connected to the list are empty). Is there a way to force the printer/Scanner to 'find' the computer?

  I can scan wireless since the mac via the application on the desktop, but not from the touchscreen scanner.  Any ideas would be greatly appreciated.

  Thank you

  RMK

  Try to download and install the driver from the link below, then check the scanning:

  http://FTP.HP.com/pub/softlib/software12/COL40170/MP-97934-1/HP_Lion_Ink_SW_v12.13.19.dmg

• have problems printing wirelessly on my C510 estn. I get an error message that says: I'm paper when I did the paper

  off message on my c510 estn paper

  I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paper

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem occurs.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4073314&prodTypeId=18972&ObjectID=c02248120

  Hope this information helps.

• I have a HP photosmart printer. I have problems printing of documents. I get a message that I have more paper. However, there are paper and the tray is installed properly. What can I do?

  I have a printer HP photosmart Plus B209. my pc is communicating with my printer but the printer will not print because it repeats me more paper. However, the tray is properly installed and loaded paper. I unplugged my printer and plugged back in nothing works. All boards

  Hello

  1. What is the full/exact error message?

  2. who is the operating system installed on the computer?

  A supply of paper problem can occur for several reasons, such as rolls of papers dusty or contaminated, the condition of the paper in the tray, or even problems with the software.

  You can run the troubleshooter and check.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: You can change the operating system that is appropriate in the article.

  See also the steps from HP article:

  HP Photosmart Plus (B209a, B209c and B209b) all-in-one printers - all-in-one not picking up or feeding of the paper in the Photo tray

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3777155&prodTypeId=18972&ObjectID=c02156652

  Hope this information helps. Response with status so that we can help you.

• HP Envy 100 eAll-in-one printer D410b

  I recently bought this printer and I meet a love hate relationship with it. Most of the problems have to do with ePrint. After reviewing the ePrint Forum, it seems that most of the problems originate from an unstable ePrint server.

  My question is: has anyone installed and used this printer? It looks elegant in the family room (not your printer typical aspect). I like the way he reacts to print applications:

  -The door opens and the display will change to indicate an impression begins

  -Out the output tray extension

  -The document is printed

  -When I pick up the paper from the printer, the output extension tray retracts to the printer

  -At this point (or after a short timeout) I expect the door closes, but is not

  -The display goes off and the printer between what I'll call hypernation mode waiting to be awakened for the next print job

  My second question is: anyone knows the door that closes by itself? That seems to be the logical operation when the printer is in mode "hybernation. Then, it was not designed this way (design control), it was not implemented like that (faulty manufacture), or my printer is defective. Responds to everyone?

  Finally the FW update is here. I tried and tried to get this update, but the printer keeps you answer that there are no updates, until I did a reset full semi of the printer. 5 packages where downloaded and installed and the result...

  THIS WORKED, THE DOOR CLOSED AFTER PRINTING!

  I tried the different steps of the printer, Eve---> print---> door closes

  farm online--> print--> door control

  Now I can really enjoy my Envy 100 D410A.

  The new FW ends on 1039HR (Netherlands) the last 2 characters can be voor different other countries.

  I close my contribution on this forum by the note of support HP USA, it is not easy to get new clients, but very diffecult to keep.

  You should have the same policy in the Netherlands...

  THE NUMBER ONE CUSTOMER SATISFACTION

• ENVY 100 and osx 10.6.

  Scanner creates only a black page. Envy is connected to the iMac via usb cable. Document & printing photo is excellent. It will scan just not. Uninstalled all HP software. Reinstalled from original disk. Upgrade software and all the firmware via the HP Web site. No improvement. Have you tried the utility icon analysis HP & icon Scan 3. No change.

  Impossible to use peripheral façade to copy... new page only black.

  I've seen this problem in the forum but found no solution. Are we all make the same mistake somewhere? Thank you!

  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• I have problems printing and scanning to an ipad with the officejet pro 8600

  The iPad works on when the HP officejet 8600 scanning and printing to the HP officejet 8600. I have an iPad 2 IOS 5.1.1

  Thank you for the information. It is most probably the cause of your problem. We have noticed with some iOS updates that some features don't work or work differently than before. I think your best option at this stage would be to buy a wireless router low cost of N. sorry for your trouble!

• HP ENVY 100 and IPhone 4S

  Photos from the phone via airprint to the Envy100 always print at the top, middle of the 4 X 6 paper. How you resize to full Page?

  Hello greg,.
  
  So with Air-print, unfortunately it has a default configuration of 4 x 6 photo printing, but what I recommend is downloaded the application ' ' HP Eprint home and Biz "' and that will give you the possibility to change the actual size of the photo itself, but once again the iOS device has a default value which can not be changed and that would be better as a workaround for what you want to do"

• I have problems printing

  I installed the device hp officejet 4500 wireless and it worked like a charm. I leave my computer (windows vista Home premium 64-bit with sp1) on and it will update with windows as they send. I think that my problems first started after a windows update. Should I uninstall the printer and then reinstall to fix the problem?

  Reinstall usually solves most of the problems. You can first try the HP Print Diagnostic or Network Diagnostic to see if they can detect/fix the issue.

  http://support.HP.com/us-en/document/c02073861

• HP ENVY 100 D410 CN517A Duplex printing problem

  My printer jams every time I try to print on both sides of the paper (as is pull the inner paper after printing the first side). It's the same kind of paper, I am using since I bought it, and it used to work before (so no, this isn't a problem with the paper). The only thing that has changed recently is that I changed the ink cartridges, but I was able to do some work before duplex he screwed up. I am on Windows 7 by the way. Any suggestion as to what is wrong?

  KeyllyNYC said it is an instrument in the service of the printer for "cleaning of the paper source.

  Go to the configuration Menu (it looks like a key), click on 'Tools' and the fourth option should be "own paper source."

  If that doesn't fix things, you can manually clean the rollers inside the machine. Simply open the lid of the scanner, then access of transport cover. In the back, there is a removable access door roller, pull it out. Then with a damp cloth wipe Lint (like a coffee filter or a microfibre cloth) large rubber rolls and let them dry.

  

  When they are dry and closes the printer, try printing again.

  I hope this helps!

• I have problems of black ink to print. It is gray very pale, even w new cartridge.

  When I installed the new cartridge is said that it is defective.

  Oh, OK.  Assuming that the ink is genuine HP, follow these steps:

  1. remove all the ink cartridges.

  2. lift the gray lever on the right side of the cart.

  3 remove and reinsert the printhead Assembly.

  4. replace the ink cartridges.

  If it does not, turn the printer off, then hold # and 6 keys while and for a bit after turning it on again.

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• HP Envy 100 v, 110 v 114

  Hello

  First of all I'm new here so please forgive me if this is in the wrong forum.

  Basically, I'm after a new wireless printer, I have been looking at the HP Envy 114 because of its wireless & Airprint capability.

  I want this camera in black, they have on the Apple store online for £220.

  However, I found the model Envy 100 £125, nine - this seems to be a huge price difference for (that I can see) not a lot of difference in functionality.

  Is not wrong in thinking that the only difference between the 100 and 114 is double-sided printing and installation of eFax?

  If these are the only two differences between these two models, so I may as well go with the model 100 and save me about £100.

  Thanks in advance for any help!

  Hello

  Welcome to the forum and thanks for your post!

  From what I can tell, the differences between the Envy 100 and 114 are minimal, as you say.

  The 114 has slightly better black print quality (1200 dpi vs 600 dpi) but the quality of the colors is the same for both products.  The 114 will also be printing/scanning slightly faster than the 100.  The 114 eFax, but from what I can tell the Envy 100 print double-sided and feature (here's a link to the data sheet/sheet: http://www.hp.com/hpinfo/newsroom/press_kits/2010/InnovationSummit/Envy_100_Datasheet.pdf).

  And, here's the datasheet for the 114.  http://www.shopping.HP.com/shopping/PDF/cq811a.PDF

  Looks like the 100 will be very good to meet your needs.

  Hope that helps!

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner