I have a HP Pavillion G620012EU laptop with windows 7 Home premium 64-bit

. I had it for two months and restarted several times and it still restarts fine

Recently I didn't let the machine till the day the day and the next, I got the error message "no boot device found". If I look in the event viewer, he said "it was an unexpected stop.

I have service pack with all updates

It restarts so very well

If it is only two months, return it for replacement or repair under warranty. Make sure that you back up your files before sending.

Tags: Windows

Similar Questions

  • HP laptop with Windows Vista Home Premium (32 bit)

    I believe I bought this laptop in 2007 and have recently had problems with updates for windows that doesn't.  I finally restored the computer to the factory settings, all installed updates, and am trying to install SP2 so that I can maybe be updated IE to 9.0.  Without the 9.0, the browser gives me a message that says that I can't go to Microsoft.com as my browser is obsolete.  My question: I don't want to buy a new computer, if not necessary, then, what do I do?  Try to upgrade windows or how long can I stay with Vista?

    Hello

    You need SP2 as a condition of system for IE9.

    Sort service packs, then download IE9.

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    @@@@@@@@@@@@@@@@@@@@@@@@

    https://www.Microsoft.com/en-us/download/Internet-Explorer-9-details.aspx

    It is support from Microsoft for Vista SP2 until 2017.

    See you soon.

  • Hi, I have a sony vaio cs series with windows vista home premium 64-bit.

    any help is appreciated very much!

    There is a problem with my laptop screen
    inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
    the line is a reflection of the top part of my screen.
    for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
    I tried print screen to show the line. but the screenshot won't capture it.
    Help, please! It's very distracting... There is a problem with my graphics card?
    my laptop isn't even that old (3 months)
    Thank you very much for reading!

    It is still under warranty.  Talk to Sony, it looks like a graphics problem.  They will have to replace the motherboard if the graphic chipset is integrated.

  • Cisco VPN Client with Windows 7 Home Premium 64-bit

    I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

    Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

    Any suggestion would be appreciated.

    Hello

    You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

    Thank you

    John

  • I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM INSTALLED PR AND I HAVE NO CD

    Good evening

    I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

    I CREATED THE SETUP CD.

    IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

    Thank you

    Saturday, may 3, 2014 15:41:51 + 0000, eduazevedo wrote:

    Good evening

    Ouch! Please do not yell at us. We can hear you if you type normally,
    in different cases.

    I HAVE ´VE GOT A LAPTOP WITH WINDOWS 7 HOME PREMIUM PRE INSTALLED AND I HAVE NO CD. I HAVE A THOMSON HOME WIRELESS INTERNET, TOO.

    I CREATED THE SETUP CD.

    IF I RESTORE MY LAPROP FOR FACTORY CONFIGURATIONS I LOSE MY CONNECTION TO THE WEB? IF SO, WHAT SHOULD I DO IN THE ROUTER?

    No, you should not lose it.

  • My laptop came with Windows 7 Home premium 64-bit

    My dell laptop came with Windows 7 Home premium 64-bit, but due to a problem I installed windows 7 ultimate 32 bit, but the dell drivers not support, so installed new Windows 7 Home premium 64-bit Suiloidi the link that I found in this community... but now it's showing the windows copy osf is not authentic... I looked for the key and installed but no use... Please suggest me this problemm...

    Have you used the product key on the COA sticker?

    Try the following:

    Click Start, right click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link 'change product key '.

    Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

    You can also use phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

    I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

    As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

    I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

    and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

    There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

    Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

    makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

    But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

    Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

    It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

    but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

    HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

    anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

    It's a PCI express 16 x slot card that is 3.0

    Here are the specifications of deetailed according to the guidelines of your page

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

    the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

    However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

    so it SHOULD work.

    and performance tests indicate that it FACT it's just stupid... bios that asks the question.

    I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

    HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

    ITS VERY frustrating

    and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

    because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

    and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

    He shoudnt be as much hassle there?

    Thank you.

    Hello

    You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

    You can Windows 8 Enterprise 90 days trial.

    If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

    The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  • How can I create system recovery disc for a new laptop with windows 7 Home Premium?

    I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

    In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

    Jim

    You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
    Kerry Brown MS - MVP - Windows desktop experience

  • Charge a laptop with Windows 7 Home Premium

    I am repairing a friends HP laptop that needs a new hard drive. Can I use my OEM Windows 7 Home Premium (full version) disc with the activation key for Windows 7 Home Premium previously installed on the laptop (the Microsoft Sticker is still on the laptop). Our only other option is to try to get the HP recovery disks, but I fancy our chances on a laptop of 2010!

    See you soon

    Post proposed by the facilitator for the appropriate forum placed

    Yes, u should be able to.

    ....... The likely differences between the OEM Windows 7 install DVD n a stock Win 7 install DVD created from site of M$ are the inclusion of additional OEM drivers for the devices n preinstalled OEM bloatware.

    After activation n installation, one or two devices works may not be not bc of missing drivers, for example Wifi card n sound card. Normally, Windows Update will automatically detect n install the missing drivers for the user. If this is not the case, the user can hv to install the driver manually via the OEM Web site.

  • Activation problem with Windows Vista Home Premium 64-bit edition

    Recently, I had a problem with my office that was running Windows Xp Pro.   After having tried to reformat the computer with my installation disc, something was holding me back upwards.  Thus, recently bought a laptop with Windows vista on it I used the disc that comes with it.  Note: I ordered this laptop for Windows 7, vista is no longer running on this laptop.  Everything installed very well on my office with the exception of one problem it won't let me activate windows.  Now, it's my copy of windows vista that I paid for.  It runs on a single computer in my office.  I have validated my software on my desktop and it's been validated.  Now why not activate Windows Vista?

    If Vista is preinstalled on your laptop, it is classified as an OEM license and is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop

    If a license of Vista at retail, you can transfer it to another computer/laptop.
    But it can only be installed on one computer at a time.

    A single license is a single Installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have Toshiba laptop with Windows Vista Home Premium. my cursor keeps going out of control and autour jumps, I'm not very computer and need someone to talk me through any help! ____

    How can I stop my cursor jumping out of control, I have windows vista home premum pack use a touchscreen Tablet

    Hi Mypoppy,

    Exactly when this happens to you (using a particular application or game)?

    The same thing happens if you use an external mouse?

    Contact Toshiba technical support to check if there is no update touch pad software. Follow the link given below to Toshiba support

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can I have a sytem of dual boot with Windows Vista Home Premium and Windows XP Professional?

    My laptop came preloaded with Windows Vista Edition Home Premium on the C drive.  The drive D partition contains recovery software.  I have a partition formatted f with nothing in it.  Can I install Windows XP Professional on the partiion F and have a system dual boot?  If so, how to load F installation CD when it wants to install in C?

    It is the instance of Vista installation.

    Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

    If the XP drivers are not available for your model, forget the idea.

    http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

    Read the above.

    See you soon. Mick Murphy - Microsoft partner

  • I have two laptops with windows 7 Home premium and the other with the profession of windows 7 Why windows won games ' are working on professional software

    why they do not work on windows prfessional

    It would also be interesting to know if the two laptops have the exact same system and graphic specifications.
    There is nothing different in the two versions of Windows that would affect the games.

  • I have a computer dell laptop with windows 7 Home Basic 64-bit, all microsoft free games are running accept CHESS TITANS can do for titan of chess is my fav game

    Windows 7 home basic 64-bit.

    What happens when you try to open Chesss Titans? Please give error messages in its entirety.

    Try:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games, expand, and uncheck the box for Chess Titans.

    5. click on OK.

    6 reset.

    7. click on Start (lower-left) and then on Control Panel.

    8. click on programs and features.

    9. on the left side of the screen, click on 'Windows turn features on or off".

    10 find the entry called games, expand and check the box for Chess Titans...

    11. click on OK.

    12 reset.

  • I'm trying to connect my Canon MG5200 wireless printer to my new HP laptop with Windows 7 Home Premium.

    The printer is connected to my office and is a part of my network. However, I tried both the printer installation and troubleshooting (which is what he says, he need next to the State of the printer on the network) and none of the options worked. Suggest me you think I try?

    You do that?

    "Program to load the CD supplied with the printer. This CD should be installed in each computer or laptop that needs access to the printer. Once the CD program is installed, the router connected to the main computer will allow each computer or laptop to locate the signal of the printer. »

Maybe you are looking for

  • HP Pavilion 17-f125ds 17.3 ": this laptop have Bluetooth?

    Please let know us if this laptop (HP Pavilion 17-f125ds 17.3 "touchscreen) Bluetooth please. If not, is there something I can do to get it?

  • HP G72-227 WM won't boot to Windows 7. Goes to a black screen with a cursor.

    My laptop is a little older than a year.  Operating system is Windows 7 Home Premium. When you try to start, F11 to get to Recovery Manager does not work. It's just a black screen with a cursor.  The version of the BIOS F.17. Conducted tests of diagn

  • Satellite Pro A120 - no sound

    Just installed Skype with MS Lifecam - no there is no sound at all!

  • Equium L20 does support a USB 2.0?

    I am about to buy an external hard drive and the seller States works with all laptops but that you need USB V2.0 when I check the specifications of my laptop it says USB 2.0. is it the same thing? Post edited by: mariedann

  • 1050 all-in-in-one

    Can anyone help? Yesterday the company Fuji (my other printer) was working remotely in order to help solve the problem of my Fuji only print the first page of all the emails. Now today the HP is exactly the same thing. I tried to adjust it but no luc