I have a hp psc 1350 all-in-one. I would be able to scan and transmit in color?

Similar Questions

• base software for hp psc 1350 all-in-one

  I bought this printer (hp psc 1350 all-in-one) second hand. My Mac Mini (OSXv10.9.4) downloaded automatically the driver.

  What site can I download the software Basic (and advanced) for this printer?

  JoachimChristianReuter

  Hi @JoachimChristia

  I can help you with your 1350 PSC and your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Printer. HP psc 1350 all - in - one.

  I bought a new laptop but cannot find the driver for the hp psc 1350 all - in - one printer. I even bought software for the driver online, but still no luck.

  Help, please.

  Hi Gem20,

  Have you tried to download the driver from the HP website? Try HERE.

  Also, make sure that you select the operating system in the drop down menu to your laptop. To check what operating system, you must follow THESE instructions.

  Good luck, I hope it works.

  KidA

• My hp psc 1350 all-in-one has suddenly stopped working.

  My hp psc 1350 all-in-one has suddenly stopped working. I can no longer open the software by clicking on the icon in the dock.

  Sorry, but I thought that I had reported my all-in-one had started working again. Unfortunately, I can't say what went around, because I don't know.  I had only a small part of the way towards what we'll fix me it when he started to work again. I remember that there was a step that I have been unable to finish, and when I asked how to overcome this problem, it started working again. I don't even have the chance to follow the final instructions. I would rather know what was wrong and what are the fixed elements, but I'll have to settle for a working machine.

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP PSC 1350 all-in-one driver for Windows 7 - driver not included!

  My Windows 7 64 bit is supposed to have the included driver for my HP PSC 1350 all-in-one, but he's not here. When I use the "Add Printer Wizard" single PSC series included is 1500 and 1600. I don't have the installation disc (this is a printer to work and they don't give me the disc when they gave me the printer). Now all the sites I go to driver to tell me that the driver is automatically included in my Windows 7, but it isn't here. Help!

  If I try to use the pilot for the series 1500 instead, I get a warning that my printer is working properly or that my computer may not work at all. Another driver which is compatible, or how can I download the correct driver?

  Yes, the PSC 1300 series includes the PSC 1350, this driver should work fine.

• HP psc 1350 all-in-one

  I have a Mac OS 10.8 and a psc 1350 all in one.  The printer was working earlier today.  I changed the cartridge, and when I went to print, it would not print.  I show not all printers in my system preferences.  He showed the 1350 all-in-one as the default printer.  I tried to download the driver and I got the following error cannot open the application "HP Print OS X" because the Power PC applications are no longer supported.  I tried to add a printer and nothing seems to work.

  I don't understand how or why the printer was working early today totally frozen and wipe everything off the computer.  Can you please help me get my printer to work?    All of the suggestions! I know the printer is old, but he was working until just now.  Thank you.

  Hi Nadine12

  The error you get is usually caused by pc power applications not supported in 10.8.

  Where did you download the driver from?

  I would like to reset the printing system.

  Note: it will erase all other printers listed, but you can add them right back.

  Click on the apple system/preferences/print & scan/hold control button and the click of the mouse in the white of the screen, reset the message box printing system appears, click Reset printing system, then put the mac password when prompted.

  Try to add the printer in return.

  You may need to get resettled again pilots. Here's a url for installing drivers 10.8 for the psc 1350.

  http://support.HP.com/us-en/document/c03378792

  (if the printer is on a network then select drivers preinstalled airprint).

  If you have any other questions please let me know.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• How to change the settings for color for HP PSC 1350 all-in-one printer

  HP psc 1350

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and the black writing all go faded. How can I change the color settings, so it comes out better?

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and
  Black writing all going faded. How can I change the color settings, so it comes out better?

  ================================
  Sounds like a bad printer cartridge or possibly a
  ... have printer problem you checked with the help of HP?

  Examples of documents Support HP:

  Colors on the Copies are incorrect
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00712305&cc=us&LC=en&DLC=en&product=306888&tmp_track_link=ot_search

  Solving print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpu04822&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN#N388

  I was wondering are these reloaded cartridges? I tried
  in my old model HP and it still wouldn't print.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi

• I have a hp psc 1610 all-in-one printer

  my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message

  There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.

  Hope this helps

• HP psc 1350 All In One Printer - missing .dll file

  Not sure if what follows is a component of "Windows XP" or "HP printer / Scanner"?

  When the desktop screen comes on, the message reads: "hphmon 06.the exe - Unable to locate component. This Application has failed to start because hpzjrd 01.Intro dll not found.  Re-installing this application may fix the problem. " Question : How can I re - install this"application"- without making a full recovery from ?  

  Hi circle-3,.

  Welcome to the HP Forums.

  When it comes to a lack. Dll file, I suggest that we start by running the HP print and Scan Doctor.  If the doctor does not resolve the problem, you may need to consider doing a system restore.

  Thanks for your time.

• HP PSC 2355 all-in-one printer/Scanner/copier will not scan to PC

  Need help with this one, friends: our HP PSC 2355 refuses to scan our PC. When we press the scan button to start scanning, we receive the following message appears: "You must install or run HP software for this feature".

  We went into the HP Director to see if there was a way around this message, but then we received the following message appears: "can't find the path" C:\Program Imaging\Bin\ of Hewlett - Packard... \Skins\HP1\HP1_Skindef.xml ' »

  We've had this piece of hardware for about three or four years now. the software worked during our ownership, and now we cannot at first base; the thing has a mind of its own!  Can someone help us?  Thank you very much!

  Thank you! I have Win7 and had the same problem. I just scanned with paint - very easy

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• Cartridges Stuck on HP psc 2210xi all-in-one

  I have a HP psc 2210xi all-in-one. When I turn it on, the ink cartridges get stuck on the right side of the transport, makes the machine a rattling as he wants to go, but does not work. How can I free cartridges, so they move backward on the transport? Under Windows XP. Receive no error message.

  Looks like it could be a blockage of the cart.  This give a try.

  http://support.HP.com/us-en/document/c00042632