HP psc 1350 All In One Printer - missing .dll file

Similar Questions

• How to change the settings for color for HP PSC 1350 all-in-one printer

  HP psc 1350

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and the black writing all go faded. How can I change the color settings, so it comes out better?

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and
  Black writing all going faded. How can I change the color settings, so it comes out better?

  ================================
  Sounds like a bad printer cartridge or possibly a
  ... have printer problem you checked with the help of HP?

  Examples of documents Support HP:

  Colors on the Copies are incorrect
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00712305&cc=us&LC=en&DLC=en&product=306888&tmp_track_link=ot_search

  Solving print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpu04822&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN#N388

  I was wondering are these reloaded cartridges? I tried
  in my old model HP and it still wouldn't print.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Printer. HP psc 1350 all - in - one.

  I bought a new laptop but cannot find the driver for the hp psc 1350 all - in - one printer. I even bought software for the driver online, but still no luck.

  Help, please.

  Hi Gem20,

  Have you tried to download the driver from the HP website? Try HERE.

  Also, make sure that you select the operating system in the drop down menu to your laptop. To check what operating system, you must follow THESE instructions.

  Good luck, I hope it works.

  KidA

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• base software for hp psc 1350 all-in-one

  I bought this printer (hp psc 1350 all-in-one) second hand. My Mac Mini (OSXv10.9.4) downloaded automatically the driver.

  What site can I download the software Basic (and advanced) for this printer?

  JoachimChristianReuter

  Hi @JoachimChristia

  I can help you with your 1350 PSC and your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• I have a hp psc 1350 all-in-one. I would be able to scan and transmit in color?

  Let me be more optimistic. How can I scan and upload a picture in color? Rkght now I get only a black and white photo.

  I know what "Congratulations" means, but I do not understand what the word means when it is added to my ad. In any case, I thought about how to digitize and transmit images in color. It's easy. Now, maybe different printers or operating systems would do it differently, but for my hp psc 1350 all-in-one, my iMac and my Mac OS 10.6.8 you do it like this:

  (1) click on the print icon in the dock. A hp psc 1350 all-in-one window will appear.

  (2) to the top of the window of all-in-one hp psc 1350 on the right side, you will see the word "gender".

  (3) click on the double triangles after 'genre' to open the drop down menu.

  (4) select 'colour' in the menu dropdown.

  (5) click "scan" at the top and right of the window of all-in-one hp psc 1350.

  (6) you can take it from there. I did, and I'm really bad at this kind of tning.

• HP PSC 1350 all-in-one driver for Windows 7 - driver not included!

  My Windows 7 64 bit is supposed to have the included driver for my HP PSC 1350 all-in-one, but he's not here. When I use the "Add Printer Wizard" single PSC series included is 1500 and 1600. I don't have the installation disc (this is a printer to work and they don't give me the disc when they gave me the printer). Now all the sites I go to driver to tell me that the driver is automatically included in my Windows 7, but it isn't here. Help!

  If I try to use the pilot for the series 1500 instead, I get a warning that my printer is working properly or that my computer may not work at all. Another driver which is compatible, or how can I download the correct driver?

  Yes, the PSC 1300 series includes the PSC 1350, this driver should work fine.

• HP psc 1350 all-in-one

  I have a Mac OS 10.8 and a psc 1350 all in one.  The printer was working earlier today.  I changed the cartridge, and when I went to print, it would not print.  I show not all printers in my system preferences.  He showed the 1350 all-in-one as the default printer.  I tried to download the driver and I got the following error cannot open the application "HP Print OS X" because the Power PC applications are no longer supported.  I tried to add a printer and nothing seems to work.

  I don't understand how or why the printer was working early today totally frozen and wipe everything off the computer.  Can you please help me get my printer to work?    All of the suggestions! I know the printer is old, but he was working until just now.  Thank you.

  Hi Nadine12

  The error you get is usually caused by pc power applications not supported in 10.8.

  Where did you download the driver from?

  I would like to reset the printing system.

  Note: it will erase all other printers listed, but you can add them right back.

  Click on the apple system/preferences/print & scan/hold control button and the click of the mouse in the white of the screen, reset the message box printing system appears, click Reset printing system, then put the mac password when prompted.

  Try to add the printer in return.

  You may need to get resettled again pilots. Here's a url for installing drivers 10.8 for the psc 1350.

  http://support.HP.com/us-en/document/c03378792

  (if the printer is on a network then select drivers preinstalled airprint).

  If you have any other questions please let me know.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• My hp psc 1350 all-in-one has suddenly stopped working.

  My hp psc 1350 all-in-one has suddenly stopped working. I can no longer open the software by clicking on the icon in the dock.

  Sorry, but I thought that I had reported my all-in-one had started working again. Unfortunately, I can't say what went around, because I don't know.  I had only a small part of the way towards what we'll fix me it when he started to work again. I remember that there was a step that I have been unable to finish, and when I asked how to overcome this problem, it started working again. I don't even have the chance to follow the final instructions. I would rather know what was wrong and what are the fixed elements, but I'll have to settle for a working machine.

• HP psc 1210 all-in-one printer: HP PC all-in-one printer

  Printing test page fine.  Prints the first page of the document very well.  After than that, each page becomes lighter and blurred until unreadable.  This "bad s.  Printer is several years old and has been the impression so far.

  Hello @bdr777,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.

  Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.

  Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).

  If copies are still faded and blurred, try these steps to clean the cartridges:

  1. Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
  2. Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
  3. To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
  4. While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
  5. Reinsert the ink cartridges and perform the alignment of ink cartridges.
  6. Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.

  

  -Source

  If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.

  I hope this helps!

  Please reply to let me know if we have solved the problem.

  

• HP PSC 1510 all-in-one printer

  My OS is Windows 7.

  I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

  Hello

  Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

  Follow the steps for troubleshooting instructions.

  (1) how you try install the printer?

  (2) using a CD/DVD to install the printer?

  Follow the steps for troubleshooting instructions.

  Method 1:

  I suggest you to refer to a link.

  Diagnose and automatically fix problems printing and printer.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

  HP PSC 1510 All - in - One Printer Drivers & Downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.