I have a rectangle on a page, identical to the rectangles on the other pages, which only will be displayed correctly.

Similar Questions

• I have cs4 master and I want to get the creative cloud which according to it, you can get lower prices if you have cs3 or higher, but he says that I can not why?

  I have cs4 master and I want to get the creative cloud which according to it, you can get lower prices if you have cs3 or higher, but he says that I can not why?

  Hi Quinn7,

  Was that you upgrading from an educational version? If so, that could be related. I would recommend reaching out to our support for assistance. I think that there is a link to the chat or by phone at the bottom of the page of the plans: plans pricing and membership creative cloud | Adobe Creative Cloud

  -Dave

• If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  Chaka - welcome!

  What you want to do on your "new" MBP?

• I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

  I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• I have two computers, one running Windows 8.1, the other works in Windows 7.

  I have two computers, one running Windows 8.1, the other works in Windows 7.  I put Premier Pro, or a suite, on both computers at the same time?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• Have two networks. One is 'working '. The other is the "homegroup". 'work' to the internet. "residential"local group. IE cannot access the internet. Help

  So here's my problem:

  It is a routing problem.  In short, it comes down to how to get IE (or any application) to use a specific WiFi adapter with Internet and ignore the adapter WiFi that goes to a network is private with no internet.

  This is the situation and what I tried.   No joy.

  PC hardware:

  primePC = Win7-Pro with two WiFi.   WiFi-Internet and WiFi-Local-premium

  tabletPC = Win10-Home with a (currently) WiFi-Local-Tablet (not internet from now).

  Use the Description of PC hardware

  primePC is my laptop that I use for work and all the rest.  It goes where I go.

  Tablet PC is in my mobile office and stay in the van (office) when I'm on-site customer.  I use it for

  things like control my monitors in the van (office).

  Network:

  WiFi-Internet (primePC) is connected Internet router to the Internet.

  WiFi-Local (primePC) is connected via the Local router

  WiFi-Tablet (Tablet PC) is connected via the Local router

  Objective:

  WiFi-Local allows you to share files and use VNC for remote desktop.  (Win10-Home support not native RDP).

  Use wireless Internet to connect primePC Apps IE for example to the internet via WiFi-Internet connected to the Internet router.

  A photo is included.

  

  THE PROBLEM:

  Because primePC has WiFi-Internet and WiFi-Local, applications such as IE are getting confused.

  How can I say (other applications) to use wireless Internet for internet connection?

  What I tried:

  Have you tried ForceBindIP on Win7, but is no longer works.  I'm sure that at some point, it has worked.

  Even if I could make it work, I don't really like it.   There *.   I don't want to link to an IP address.  I want to

  link to a Mac address is the Mac of the WiFi-Internet address.

  Other Options:

  Soft router (ugly) There must be something that can do this.  But I have not found one.  I guess it's a kind of soft router.

  Firewall, routing (still ugly)

  I have a firewall (on average by the way).   Creating a routing table in AVG is not good for the following reason.

  The entire Setup is mobile.    WiFi Internet is constantly connected to different internet routers, so learning new IP address that I have no control over.

  Future:

  Currently, the problem is on the primePC.   But in the end, I have also a problem similar with tabletPC, since the tabletPC is going to have a 3G connection / 4G to the internet.  This connection will go up and down based on (A) if I have internet with WiFi-Internet-router or not.   Using a hub of 3G / 4G for private network will not be good option because (A) the security because it allows access to my tablet, another security van mobile devices (B) cost of using a mobile router WiFi "hot spot" vs just to have two phone lines, both have unlimited data service of attachment (not unlimited hotspot service).

  Hello

  According to the description, I understand that you have a routing problem, you try to get IE to use a specific WIFI adapter with the internet, while ignoring the other WIFI adapter that goes to a private network.

  It is not possible to connect two computer to the same WIFI cards. You must unmark a WIFI to use the other WIFI adapter.

  You can search using your search engine to find any third party software which may help you.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  your computer is connected to a network domain?

  If your computer is connected to the domain network, then I would recommend to post your query on TechNet Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• Hello, I have photoshop cc, and if I opened in the raw image converter, it will not open it all sinds more minutes a quantity, I restart my pc, but still he used open photo watt is the following

  Hey

  I have photo shop original cc and for half an hour, if I work in the RAWConverter and blessing opening image, he does not remember, he always did, but now all of a sudden no longer PC restarts, but in vain

  someone knows advice

  Brewers hops René gr

  Hi René,.

  Continue the conversation on your thread previous link: https://forums.adobe.com/thread/1946038?sr=inbox&ru=2313841

  Kind regards
  Rahul

• How to place a menu in a top-level page which only reflects this child pages pages?

  I need to create a menu for the child of the pages are detached from one of my top-level pages. Can anyone help please.

  It is not a setting that does it automatically, but you can change the menu 'manual' and manually enter page names and links.

• I have several symbols, how can we showed above the others when you click it?

  I have an animation that is a City/Beach/sea, and different parts of the city are symbols that can be clicked on, for example a boat in the sea could be clicked that would then lead the boat. My problem is that the boat could grow to fill the screen, then the animation playing, but as there are many other symbols, then another symbol could be on top of the animation clicked on / reading. Ideally when each animation is clicked, it would move to the top of the list of layers, but I guess that's not possible, so I was wondering if anyone had a better way to do this?

  You need to change the z-index when you click on a higher level and return it to its original level when it ends, or when the user clicks on another symbol.

• I have to finish a presentation as soon as possible! I have to add more (already created) document to the other two. It's orientation. 2 are already in portrait mode. I have to add is landscape. Is there a way to fix this?

  When you create a form with Adobe Designer, and you need the joint page (a portrait and a landscape) orientation you can achieve this by using multiple Master pages.

  I took your two shapes and created an example (see table) with mixed orientation.

  Here's what you do to mingle with orientation...

  Create a new form

  Add a Master Page (with the Master Page tab active, select Insert > new Master Page)

  Select the second Master Page and set the orientation to landscape (object > Master Page tab)

  Select the Design view tab

  Add a new page (active the Design view tab, select Insert > new Page)

  To associate the new page to the second (landscape) Master Page...

  Select the new page (from the hierarchy palette)

  In the object > paging palette set the property of 'place' by browsing where you want (i.e. on Page "insert the name of your page master landscape here")

  Note: you need to resize the content are of the page to match the landscape orientation.

  I hope this helps.

  Concerning

  Steve

• Downloaded 10.0.1 and now do not have automatic locking. How can I activate the automatic locking, my devices will not turn

  Where is Auto-Lock in 10.0.1 update?

  The new version 10.0.1 moved the Auto-Lock. Automatic locking is now at:

  1. Parameters
  2. Display & brightness
  3. Auto-Lock.

• I have a HP Photosmart 5512. Just replaced the black cartridge, now, it will not print black.

  Windows XP OS

  Even tried a second new black cartridge in luck, it was defective.  Still no luck

  I downloaded HP Print & Scan Doctor.  He ran.  Not that it prints.  Don't know why, don't care.  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&lang=en&softwareitem=MP-114642-1

• I have two disks, a load with Vista 64, the other Vista 32. Can I integrate the 32 in the 64?

  I would like, with a minimum of functions software loss as Nero, etc are my new old VIsta 32 part, instead, a 64 bits two order install. Any suggestions?

  N °

  They are 2 different operating systems.

  You cannot merge together.

  You can delete one or the other.

  See you soon.

  Mick Murphy - Microsoft partner

• My plan has expired and I have updated to a regime of free through the University but my programs will not open.

  I am currently getting free creative cloud through University, I attend, but my programs will not open and I don't understand why.

  Please visit CC help | 'Renew your membership' window appears when you launch an application Cloud Creative

  Concerning

  Hervé Khare