I have a windows 8 blue screen of death!

Similar Questions

• Help in installing Windows 7 - blue screen of death error

  Hi all.

  I bought my new laptop yesterday and I tried to install Windows 7 Ultimate on it, installation is fine, but when it comes to the "Complete the Installation" part, the screen flashes once and I see the blue screen of death. I know that there are no hardware issues or disc problems.

  The laptop that I bought is a Toshiba Satelittle L50 - B - 11 c and the version of the BiOS is 1.40 if necessary.

  Is it preloaded with an existing version of Windows already?

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Resources:

  http://support.Microsoft.com/kb/2832566

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• Windows 7 Blue Screen Of Death after HDD Turnt off automatically. ;-; Help?

  So, I had a break from my computer for 30 minutes and then I went back and when I moved my mouse to wake it up. He did all the normal sounds and I was about to click on Cinema 4 d but then the blue screen of death that happened. This isn't the first time. The last time I lost some of my files :(

  Help, please.

  MEMORY. DMP: https://www.mediafire.com/?282vd0lmebffc8w

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Windows XP blue screen of death... Gateway series LT Netbook

  When I start my gateway LT series netbook, I get to the screen where the Windows logo appears for about 5 seconds, then I get a blue screen for a fraction of a second, not long enough to read the typical start-up error message. Then the process starts all over again, again and again! I have not any hardware or software recently added. The netbook already has Service Pack3 pre-installed when I got it. I already tried to work by pressing F8 and learn to be on a page where I have the option to start my netbook on safe mode. Same thing is happening. I already brought my computer to the gateway service center because I have not had the unit for more than a year. I have already informed its software problems are not included in the warranty. However, I'm pretty on my own on that now. So I pretty much need the help of this irritable community.

  I hope that someone can push me to the right direction to get my netbook to life. Thanks in advance!

  Hello

  · Do you have the cd of Windows XP when you bought the computer?

  We will get the exact error message and the error code by following the steps below:

  Select Disable automatic restart in the event of system failure in the Advanced Start menu options for the error.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  In the meantime you can try disconnecting any device connected to the computer with the exception of the keyboard and mouse and restart the computer and check the result

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista blue screen of death

  That's what I get:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000005
  BCP4: 8F5C8C98
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\Mini022414-02.dmp
  C:\TEMP\WER-81557-0.SysData.XML
  C:\TEMP\WER22DB.tmp.version.txt

  I read that some people have said once they have downloaded Service Pack 2, the problem has been resolved, but whenever I try to install this update, Windows tells me she didn't and I can not fix. It happens randomly. I get the blue screen long enough to read it says something on a USB stick something or other and then it the computer shuts down and restarts and told to choose a safe mode or restart windows normally. I just reboot normally because I don't know what to do in safe mode. He began to do last night. Only once last night and once a bit ago. If anyone knows if and how this problem can be solved, please let me know. I am running Windows Vista 64-bit on HP Pavilion dv6000.

  AP

  These have been associated with USBHUB. SYS.  Run the Driver Verifier to find the underlying cause.

  Please run this test to find out which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

• Windows Vista Blue Screen of Death - what is a virus or malware?

  My computer automatically restarts on its own. It gives me a message "Windows closed unexpectedly". When I try to look for a solution on the internet on the computer it redirects me to a link. Every solution I see there as a hardware problem, but the way it is it seems to be a virus or malware. I ran Malwarebytes on it with no luck and rank just the sight of the blue screen NirSoft.

  My level of knowledge allows me to do some research, but it is not enough where I feel comfortable playing with files of material.
  Hello
  If you think your computer infected with the malware, try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Windows Vista Blue Screen of Death IRQL not less or equal to

  Well firstly, I accidentally stumbled on the case of the computer once and that's how it all started... I get the screen that says 'IRQL NOT LESS or EQUAL' screen and error 0 x 00000050 PAGE_FAULT_NONPAGED_AREA Stop. But I get the IRQL NOW LESS EQUAL of GOLD more often than not... It appears so often... I completely restored my computer once already and still there. I would contact with my computer (HP) manufaturur, but I do not know what updates my need drivers. In addition, I'm not good at using the Event Viewer either.

  Hello

  Back to factory specifications is essentially a clean install and
  you have already done this, so no, it would not help as there must be
  hardware problems.

  I hope this helps.

• Windows 8 Blue Screen of Death

  Hi, I bought a computer with Windows 8 a month ago. In the last two days I started to have BSD with 3 error messages: Bad_Pool_Caller, lack of control of kernel security and corrupted driver, with the first two CARNIANI restart my computer and one stopping. I've read different suggestions for each of the errors but am unable to follow through. I tried to open dmp files to see that drivers can be the cause of the problem, but as I am not a technician, I was unable to do so. I am also grateful to get instructions on how to post a link to my SkyDrive here share my dmp files. Help, please!

  Disable overclocking if enabled in the bios.

  Do you get the bsod if you disconnect the usb netgear device. Download the new dmp for analysis

• Windows Update and Blue Screen of Death

  Hello

  I use a laptop ASUS X550C of windows 8.

  The problem that seems to have the laptop is blue screen of death after a second batch of updates.

  I think that some updates are not compatible with the hardware, but I don't know which.

  Kindly help as soon as possible.

  Thank you

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue screen of death (stop 0x0000007B) after April Windows Update on XP Home.

  My machine (Dell Dimension 3100 with XP Home) home is set for automatic recovery of Windows updates. I reload often, but when I was forced to start again last week, I got the blue screen of death. Apart from the general BSOD error message, I got the stop code:

  STOP 0x0000007B...

  I forgot the subsequent stop codes, but search recall I was doing on them indicated drivers disk or storage-related problem.

  I ran all sorts of Dell diagnostics on my hardware, get absolutely no problem. Scan of a viral infection was also negative. A colleague help out me suggested removing the updates of Windows of April, he did help and usefulness of the ERD. XP loaded and started after that, if I had to go through a process of slooow restart for most updates. My office also now charge many times slower - I suspect drivers and services can't find what they expect to find and take considerable time to make mistakes.

  My Dell has a range of Intel (RAID-1) matrix installed. I strongly suspect that this pilot was in trouble after the April update Windows Update.

  So, what should I do to prevent this from happening again? I don't know the specific fix involved. I have disabled the automatic updates for now.

  TIA

  Rick

  Complete sweep of Kaspersky AV, booted from the CD, turned up negative, so I doubt that it is an infection.

  I'm sorry, but this does not exclude the possibility of infection. See step # 3 in my previous response, or contact Ms. PCSafety for assistance.

  Or see http://msdn.microsoft.com/en-us/library/ff559218 (VS.85) .aspx and/or http://aumha.org/a/stop.php#0x7b for more troubleshooting ideas.

  Or if you let Windows Update to install an update for the driver (never a good idea), try a roll-back of pilot.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue Screen of Death After Windows Update

  I was out of the House one night and while outside, my cell phone went through a routine Windows Update and restarted (what he did specifically I'm not aware of). Unfortunately, when I came back, I met a blue screen of death. I tried a system repair and restoration of the system, and none of them worked. I'm typing this from my wife's computer as we speak. I am very anxious, and I would like to use my laptop again. If anyone can help, please reply as soon as possible.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm