I have corruption was detected in the message of mananger feature as well.

Similar Questions

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.

• ERROR: no boot disk was detected or the disc has failrd

  HP ENVY h8-1534pc with windows 8.

  error: no boot disk was detected or the drive failed.

  tried to run the recovery cd ROM even error. No cd or hard drve no indication in the boot order.

  out of resources

  Hello! Here are a few responses from members of the forum about your problem. See if you can find a solution from them. http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AOSandSW&q=no+boot+disk+has+been+detected

  Dokie!

  PS It doesn't look good for me. Good luck and thanks for posting back.

  It has been my experience in the past that a message as this means that either the operating system is corrupt or your hard drive is dead. If your hard drive does not show in the boot order, it's a major sign of a bad HD, but not100%.  There are several free testers HD. Most have the back, which means that you don't have to have an operating system to start their. If you are not able to test your HD with F2 or F11 functions, try one of them. You will need to burn an ISO to a CD file.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  PS2 there may be answers best of the latter. Weekends are slow at times. I'm still slow

• HP Pavilion TouchSmart 23-f202: no boot disk was detected or the drive failed

  On startup, I get the message "no boot disk was detected or the drive failed.

  I bought a new H/D, installed and at startup I get the same message that I got on the old H/D.

  As there was no disc provided with the computer when I bought what I'm doing, had to do to get this sucker to the top and work?

  Hi @Jimmy56,

  Welcome to the Forums of HP Support! I understand that you had a type "no boot drive has been detected" error at startup to the top, and you have replaced the hard drive and have the same problem. I'm happy to help you with this.

  If replace you the original hard disk, you can use the following to test the hard drive. It is possible, there was a connectivity issue and just re-allocation of places the hard drive could make a difference. Computers HP - display of error HDD before starting the computer

  The most recent hard disk you put in, if not there was no operating system installed, you'll get the same type of message. You could make the same diagnosis of HDD from the link above, just to make sure that the disc is good.

  Please let me know the results, but so just install the original in the system hard disk works, and it starts correctly, so please mark this message as a solution. Bravo would be appreciated as well.

• RE: Corruption is detected in the parameters of the Manager of the service? /

  Hello

  I turned on my computer this morning and received a message that says: "Corruption has been detected in the settings of your feature Manager. Backup has been loaded. »

  I clicked on ok because I didn't know what else to do, but I am concerned about this message. I just downloaded Microsoft Security Essentials a couple of days. I also have Super Anti-Spyware running on my computer.  I run analysis about every day because I had a trojan virus (or whatever it is) in my system a few weeks ago. The Trojan horse has been removed. What happens with my computer? Microsoft Security Essentials telling me that my computer is fine and "protected". Super Anti-Spyware reports the same thing... A tech friend told me that I can have more than one program of security on my laptop.  It is not a conflict between the programs that I have now, he said.  I can't take my computer repair. Here are some details: I read the related discussions. I don't have AT & T service. My internet provider is TMobile and I have an old HP Pavilion laptop. It has VISTA.

  Help please. I would be very happy to help. I'm scared to run my laptop and am concerned about my files!

  Thank you

  E-mail address is removed from the privacy *.

  If the seller cannot help then you need to (a) ensure that the communication program is compatible with Windows Vista (b) uninstall the current program, restart the PC, reinstall the compatible program by right clicking and choose 'run as administrator '. (c) disable antivirus then the installation of the program.

• Error No. Boot Disk was detected or the drive failed - h8-1020 Desktop

  1 hp pavilion HPE h8-1020

  2. windows 7 64 bit

  3. Realtek PCIe GBE Family Controller series v2.38 24/12/10

  Error: No boot disk was detected or the drive failed.

  4. no changes to the system.

  After I restarted my computer about 7 times it finally started, so for me to be able to write this message.  However, this problem occurred several times over the last week or two. I get a blue screen, then the computer goes into a splash screen and I get the above error.  Of course, I'm 2 months past my warranty period, so I'm here, GROUND.

  Is my hard drive on its way? Is there a possible difficulty for this seizure completely breaks down?  Information to help save my machine would be great and much appreciated.  Thank you!

  P.S. I ran a diagnostic and all past test except the bootable disc.  But for some reason when I restart a little more time it get passed my system and begins running.

  Note: I created recovery discs and I backed up all my files.

  Hello:

  In my view, there is nothing you can do to repair the drive except to replace it.

  You can run the checkdisk utility and check both boxes.

  Please see the link below for more information.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

  Please understand that this will only delay the inevitable at best.

  Paul

• A fatal bus error was detected on the function of the peripheral bus component 0 7 0

  Hi all

  I'm trying to diagnose a hardware problem with my Dell PowerEdge R410. The problem occurred after a kernel patch and reboot linux security (I'm under Ubuntu 14.04 and I'm on Linux 3.13.0 - 100-generic). Initially, the machine would crash when starting in the BONE, but I managed to do always start too.

  I see the following errors:

  --------------------------------------------------

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on the function of the peripheral bus component 0 7 0.

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on an element at location 1.

  ----------------------------------------------------

  I'm having a hard time figuring what component, it exactly. Here is the result of lspci:

  ------------------------------------------------------------------------------------------------

  00:00.0 Host bridge: Intel Corporation 5500 IO Hub port ESI (rev 13)
  00:01.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 1 (rev 13)
  00:03.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 3 (rev 13)
  00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 7 (rev 13)
  00:14.0 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub System Management records (rev 13)
  00:14.1 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub GPIO and Notepad records (rev 13)
  00:14.2 PIC: Intel Corporation 7500/5520/5500 / X 58 control status of e / Hub and RAS records (rev 13)
  00:1 a. 0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
  00:1 a. 1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
  00:1 a. 7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #2
  00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
  00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
  00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
  00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
  00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #1
  00:1E.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
  00:1F.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
  00:1F.2 IDE interface: Intel Corporation 82801JI port (ICH10 Family) SATA IDE Controller #1 4
  00:1F.5 IDE interface: Intel Corporation 82801JI port (ICH10 family) SATA IDE Controller #2 2
  01: 00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  Serial Attached SCSI 03:00.0 controller: LSI Logic / Symbios Logic SAS2008 PCI - Express Fusion - MPT SAS-2 [Falcon] (rev 03)
  04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
  Fe: 00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture generic Non-core records (rev 02)
  Fe: 00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture system address Decoder (rev 02)
  Fe: 02,0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
  Fe: 02.1 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 0 (rev 02)
  Fe: 02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port link 0 (rev 02)
  Fe: 02.3 Host bridge: Intel Corporation Xeon 5600 Series mirror Port link 1 (rev 02)
  Fe: 02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
  Fe: 02.5 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 1 (rev 02)
  Fe: 03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
  Fe: 03.1 Host bridge: Intel Corporation Xeon 5600 Series Memory Controller target address decoder built-in (rev 02)
  Fe: 03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
  Fe: 03.4 Host bridge: Intel Corporation Xeon 5600 Series integrated Memory Controller Test Registers (rev 02)
  Fe: 04.0 Host bridge: Intel Corporation Xeon 5600 Series memory controller channel 0 control integrated (rev 02)
  Fe: 04.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 0 address memory (rev 02)
  Fe: 04.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller 0 (rev 02) grade channel
  Fe: 04.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 0 control thermal (rev 02)
  Fe: 05.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 controls memory (rev 02)
  Fe: 05.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 (rev 02) memory address
  Fe: 05.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 row (rev 02)
  Fe: 05.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 control thermal (rev 02)
  Fe: 06.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 controls memory (rev 02)
  Fe: 06.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 (rev 02) memory address
  Fe: 06.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 rank (rev 02)
  Fe: 06.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 controls thermal (rev 02)

  ------------------------------------------------------------------------------------------------

  So, one of the components seems to be "00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 hub of e/s PCI Express Root Port 7 (rev 13)", but I'm not clear as to what this component is
  and what it connects too. Crack, "a fatal bus was detected on an element at location 1." seems too vague. What is slot 1 in this case?

  My questions are:

  What components apply to critical errors?

  I have to do things in the following order:

  -Unplug the power cord and hold it for 20 seconds
  -Firmware updates
  -Try reinstalling components
  -Replace parts

  PS. I'm no longer under warranty

  Thank you

  Dave

  Hello

  Location 1 must reference slot PCie 1. It is very likely the slot in which the PERC controller is. Your order of troubleshooting is correct. If it's the only occurrence, resettlement and the firmware update are probably enough.

• Cannot cannot to the Internet, get 'call was canceled by the message filter. (HRESULT:0 exception x 80010002 (RPC_E_CALL_CANCELLED) "message.)

  Original title: call was canceled by the message filter. (HRESULT:0 exception x 80010002 (RPC_E_CALL_CANCELLED))

  Help! I have no idea about computers and I had a problem with my sony vaio laptop WIFI connection. As a first step, it would be only to connect wifi to my parents House now its not connecting at all. He told me that the DNS server is not responding and my computer is trying to use a DNS server that is incorrect or does not exist. So I restarted my computer and the error message above popped up. Any help I can get would be great. Thanks 1million

  Hello

  -Did you change your computer, after which the question began?

  I would recommend you follow these steps and check if the problem persits.

  Step 1:

  Temporarily disable all security software, and check.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Follow the steps in this article and see if they help.

  Why can't I connect to the Internet?

  Step 3:

  Flush the DNS and request a new IP address of your ISP server by following these steps.

  a. Click Start, click Run.
  b. in the Run dialog box type cmd.exe and click OK.
  c. when the command prompt opens type the following command. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  d. output

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• Vista Business machine linux three or four open via samba with her but is not open, single machine gives access denied error you have no right to open the message.

  Vista Business and Samba problem

  Dear all members,.

  We have a strange problem in Vista Business, three or four linux machine open with her samba but is not open that one machine, give access denied error that you have no right to open the message. Other business machine two vista also open all the linux with samba machine. If Linux doesn't side no problem. It is machine Rhel6.

  How can we it is resolved?  NTLM necessary samba settings in Vista business also. Strange because 3 open one machine is not open.

  Concerning

  Plantade
  India
  Ahmedabad

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• All help & support files have disappeared. I get the message "help and support files cannot start."

  Original title: help & support files

  Windows 7 Professional. All help & support files have disappeared. I get the message "help and support files cannot start."

  How to return please?.

  Perhaps.  An analysis of file system I think would replace the help files, but you can try it, there is no harm.  Just open a command prompt (right click and "open as Administrator"), and then type sfc/scannow

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• I play a cd of education. He is supposed to have video with it, but the message States cannot find the vids:iv32 decompressor. I have, it's not sure of 1v or iv. What is a vidsiv32decompressoe? How do you find it on the computer?

  I have an education program. The program is supposed to show a viedo in several sections. In a staatement that displays a message that States cannot find vids:iv32

  Hi GreenPhantom,

  1. where you can play education program CD earlier?

  There is a possibility that this may be due to some corrupt codec installed on the computer.
  I suggest you uninstall third-party codec available on the computer and check.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Check also in the program if any adjustment needs to be configured.
  For further assistance, contact the program vendor.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to detect if the message sent or received

  Hello

  I need to detect if an e-mail message is sent. I tried folder listener do and tried messagefolder.getFolderType () is Folder.SENT, but it does not work as I am unable to find.

  How to get it?

  Concerning

  Good point.  I should have told check the status.  Just to explain, here is an example of method that should delete when the message is transmitted.

  public void changed (MessageEvent e) {}

  try {}
  Message m = e.getMessage ();
  If (m.getStatus () == Message.Status.TX_SENT) {}
  Delete this...
  File f = m.getFolder ();
  f.deleteMessage (m);
  MessageToDelete.deleteMessageToDeleteForMessage (m);
  }
  } catch (Exception ex) {}
  Depending on your application

  }
  }