I have no power, except if it is plugged, a fairly new battery and no visible battery icon.
My computer has no power unless he is suddenly connected, works with a battery only 5 months and no indication no battery icon. What it means
I need another battery, have a power supply problem, or what? Thanks for any help!
Hello
-Did you change on your computer before the show?
-What is the brand and model of your computer?
Maybe your computer does not receive enough power from the adapter to the battery. I suggest contacting the manufacturer of your computer or get your battery replaced if it is defective.
See also:
Battery meter: frequently asked questions
Tags: Windows
Similar Questions
-
At my computer crash. Have a license number for Adobe Acrobat 8 professional. New machine and it says active because I can not disable computer crashed.
You must have Adobe disable and reset your activation meter
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below
Serial number and activation support (non - CC)
-
I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.
I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.
There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.
Hey AmnonMikeCohen,
Thank you for being a part of the communities of Apple Support.
I understand that your Mac is not start properly after the power went out. Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:
Reset the management system (SCM) controller on your Mac.
How to reset the NVRAM on your Mac.
See you soon.
-
Not enough disk space (428 and 488 event id)
I have 3 servers,
Exchange 2010
TMG 2010
Member Server. (2008)
These entire servers have the same problem, the problem is that I can't install and uninstall anything on it even window update patches cannot be installed on it. On the server exchange and Member roll and functionality cannot be opened and displays the error message. (Exception from HRESULT: 0 x 80070490)
Appear in the event viewer for most event IDS are 428 and 488 (not enough space).
I have enough space on each server, IE more than 40 GB of free space.
Please answer me if there is no possible solution.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
How can I disable the message from Microsoft for WINDOWS 7 that "7cannot Windows Installer while your battery is in your laptop".
I have pluged my power cord power supply for a constant regular to diet at the same time?Hi, Sandy
The Windows 7 upgrade has nothing to do with Windows Update. Transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
TIP: You may need a new battery (especially if it's more than 2 years & you have always kept inserted in its Bay while running on current alternative).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have a power shot 40 & I learned how to make a zoom in / maginfy a pic, but I cannot find a way to save the image maginfied.
Thank you ~.
Im not sure what you mean, but if you mean when you zoom in on a photo in playback mode, it is a way to save the area zoomed separately from the original photo on the camera.
To start the Cup select in the playback menu.
The Zoom lever allows you to resize the image and you can press the dots on the adjustment wheel to move the frame also.
You can also press the Disp to change orientation.
When you are finished, press Set and it will ask you to save a new Image, click Ok.
Press Menu and when your promtped to the new display picture select Yes or no.
You can consider a book written especially for your SX40. I own the SX50 and bought this book because a large part of it still applies. It is called A Short Course in Canon Powershot HS SX40 photography written by Dennis P. Curtin.
The procedure I just tell you it came from this book which is clearer than the way I have described mysef
-
I have a power shot sx 40 & would like information on the use of filters with this device?
Thank you ~.
Hi Rainlily,
You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!
Steve M.
-
Can help you, I get access denied you do not have enough words to activate power
I am trying to install a software, but I get this message in Admin: access denied! You don't have enough power words to activate this function.
The message continues to appear over and over again and finally goes and does to install the software. It is on a PC HP mini.
LMV,
I hope that you do not have too much of your own data personal on the computer yet, because if you used I would suggest that you reinstall the operating system to solve these problems.
Go to http://partsurfer.hp.com and enter your name/product number in the search field. The results that arise should include a restore CD that you can order to perform the reinstallation. Yet once, please make sure to save any personal data that you have put on the computer before attempting this.
-Alex
-
My USB Ports don't work, but they still have the power to impose measures.
I have a Toshiba laptop (A205-S5859) and all 4 of my USB ports do not work. I am running Vista Home Premium. Sometimes they detect an 'unknown device', but it is not very useful. They also always charge my blackberry.
In my efforts to fix it, I have:
* disabled/enabled all 4.
* uninstalled/installed all 4
* Made some USB ports are initialized in my BIOS
* some thing I have updated BIOS updated
What can I do else? Help, please! I'm desperate to be able to sync my new blackberry with my previous all my info is on my computer. I also want to be able to sync my blackberry on my computer in the future...
Hello
Even if you did some of them previously please follow these steps in this order.
--------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for your devices (can have
zero or more than one) and top - right click UNINSTALL.Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
Is there.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My usb ports have no power in my toshiba satellite with windows 7. I don't know what to do.
Looks like a hardware problem, in which case you will need to contact Toshiba support.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact
SC Tom
-
Yesterday, I have installed, CS4, on, one, new, computer and it, works ok, EXCEPT, I, no, more, have, Contact, sheet, maker and, me, oblong, have, package, print, developer, both, I have, really, need, bogus, v e, help?
Are these third-party plugin, actions or scripts. If they are you need to install in CS4. On this new machine.
-
I just bought a new laptop and have downloaded Lightroom 4.4. The font size is tiny and unreadable. I looked in preferences to see if the font size can be redefined to allow me to read the screen but can't see anything (except the magnification tool application) to read the screen.
Any ideas?
Hello
You can change the font of the user interface of the options below.
- On Windows, choose Edition > Preferences > Interface > font size:
- On Mac OS, choose Lightroom > Preferences > Interface > font size:
Change font size according to your need.
You must close out of Lightroom and restart for the change to take effect.
Let us know if this helps!
Kind regards
Vivet
-
I have a 610-1280qd Touchsmart when he goes to sleep night powers and must be reconnected
He falls asleep in the night that the blue light on the side goes from blue to orange. In the morning, the yellow light is released, move the mouse, the keyboard, nothing. Push the power button, nothing.
Disconnect the computer from the surge protector and plug it into the same place, nothing. Plug it into another dwelling in the surge protector, it lights up.
I plugged directly into the wall, the same symptoms, unplug it, plug it into the wall, nothing. Plug the surge protector, it lights up.
It is very consistent, by unplugging and plugging it into the same plug will not do anything, plug it in elsewhere, until she comes.
Summer than a REALLY sweet computer except for present a defect and it's weird. I got this computer since February and it started about 2 months ago.
BTW, when I change the power management to have the screen go to sleep, but stay processor, it does not stay on a night which I suppose is not surprising. My power setting is balanced with the monitor in 10 minutes and the computer goes to sleep in 20 minutes.
kezzyg
After reading your post several times, then browsing the forums (HP and others), I suspect that this might be a question of power brick. It sounds BOUNCING so maybe that is a solution if you don't him have already explored. Looks like others have had the same experience and the difficulty was to replace the brick. I hope that if you find this message, your problem is already solved but if not, try this.
I am an employee of HP.
Kind regards
Cooper56If you found this information useful, please make it easier for people who may encounter a problem of similar type marking my response as "accept as a Solution.
Of course, you can also click on "Congratulations" STAR to say thanks! *** -
Laptop stops when the power cord is not plugged in but the battery is charged to 100%.
just happened this morning. accidentally deleted the decision-making of the laptop. and the judgment of the laptop. weird because this has happened before and no problem.
However, this phone wouldn't turn. until I have plug AC laptop would be the power of the laptop on. I checked the battery is the meter displays 100% charged. in windows, it is 100% loaded. but as soon as I unplug the laptop, the computer shuts down.
I have windows 7 and my computer is HP dv6t Quad Ed. any help would be much appreicated.
Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.
If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.
Post your results here in your thread.
Best regards
ERICO
-
A satellite - new battery is flat when power off
Hi all
I have a new battery that the other was under warranty.
When I stop and turn off the power to the computer, the battery seems to be running in the back ground as when I turn on the pc there are only about 3 percent of power in the battery.
What are the correct settings, so I can stop and the battery does not get used?
Thank you
JacquieHey,.
Really shut down you the computer, or it is in standby mode? No battery power is necessary if you turn off the computer or switch to hibernation mode. Standby battery power is required.
In addition, you wrote that you have a new battery. How many times you load the already? A new battery must be charged at least 5 times to reach full capacity.
If you have loaded the battery is battery LED color change?
Maybe you are looking for
-
OK, so I know how to delete and block a Skype contact by right-clicking and choosing the option remove or contact block. However, I deleted some contacts always appear on my homepage. Am I missing something to stop these contacts appear in my Skype?
-
Card 3G and Bluetooth stack question - tecra M4
I'm having a problem getting a 3G vodafone card to work with a Toshiba Tecra M4. The problem is that the card won't install properly on this laptop (with exclamation point appears in the Device Manager and additional ports appear under "ports", but n
-
Satellite M40-145: Portuguese and European models are different?
We bought 2 M40-145 and 2 Port Replicator III. These products are also compatible to the European and Portuguese Toshiba site. However, it seems that they are not. Can you confirm this? Is it possible that there are errors in the site? Thank you José
-
Where are my previous purchases
I have an older, sync iPad with an old laptop (over a year ago). I wiped and got rid of the iPad and the laptop is dead. I just got a new iPad mini, I'm using the same apple ID, but I do not see one of my previous purchases of TV-film-app. I tried to
-
Original title: yesterday 01 December, I downloaded microsoft security scanner about 87.5 MB now afterdownloaded is not opening and why not installed I have downloaded microsoft security scanner which valid for nearly 10 days in the night yesterday n