I have to turn on modem before the router to connect

Similar Questions

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• I have problems turning on my computer, sometimes I have it turn on and off the hard path of startup. Because it goes to the system again and then a blue screen. What is the hard drive?

  I have to leave my computer on to avoid having to turn it off with the power off button.  Otherwise, I have to turn on & off with the power button.  When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it.  So, I press the power button to continue until initialization starts normally.

  Hello

  1. You did it last changes before the show?
  2. What is the error message/code what do you see with the blue screen?
  3. What is your operating system?
  4. Are you able to boot to the desktop?

  The steps below apply to Windows 7:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Make sure that you back up your data.

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Step 2) click on the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 3: Run a virus scan:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  It will be useful.

• I am unable to unsubscribe from communities of APPLE. mailbox had 3-4 pages of comments. Have everuthing turned off and saved the changes... Help

  I am unable to unsubscribe from communities of APPLE. Mailbox has 3-4 pages of comments by email. Have everything turned off and saved the changes... Help

  , You click on "stop following" in each community/thread you posted in?

• I got a new modem and the router and now I can't print wireless.

  I have a Photosmart 8450 printer.  My operating system is Windows7.  I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand.  It worked fine before the new modem and the router.  She is 'offline' and I can't understand how to put line.  Thanks for any help and easy enough for me to follow.

  Hello raedene715.

  Thanks for the transcript, it was useful.

  Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.

  See you soon!

• I have XP pro and you want to connect to the MSN remote connection that uses my computer through my D Link router so that I can use the router to connect a tablet.

  How D link to connect to the modem connection

  I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.

  Hi Bob,

  You can follow this link & check if it helps:

  How to set up and use remote connections in Windows XP?

  Internet Connection Wizard

  
  Reference: How to configure Internet access in Windows XP Professional?

  Hope the helps of information.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Unable to connect to Homegroup Windows 7 between the Modem to the PC and the Modem to the router for PC users.

  I want to talk about WIRED computers, do not speak of wireless.

  I have 3 PC:

  -2 are connected via Modem directly to the PC.

  -1 is connected through router, and the router is connected to the modem.

  The problem, this is it, it cannot detect the homegroup that I created on the computer that is directly connected by modem.

  The 2 PC via modem are perfectly detected and connected to the homegroup, so I want to know what I would do to another PC (which is connected to the router via modem) detects the homegroup, I had already created?

  Help, please.

  A Modem can have only two ports, connect to the internet (Wide Area Network) and the second to a SINGLE local device. In most cases the internet Service Pwill provide with only an IP address so itself cannot connect to more than one at a time. In current solutions, it is very rare for a Modem to use. If as you say, you have several devices connected to this unit then he himself is a router but possibly with the Modem built in if you have ADSL ISP.

  If your second unit is also a router then that explains why you cannot connect all devices in the same residential group.

  Router 1 has created a Local Area Network including both PC and the WAN port on the Router 2. Router 2 has created another independent local network with the 3rd PC. It is very likely that the two local networks will be IPv4 and traffic can be routed between them correctly in both directions according to the two local networks subnet ranges.

  Even if they are properly configured to allow traffic that HomeGroup requires IPv6 that some home routers support fully and every Member of the residential group must be on the same LAN anyway, he will not support a routed connection.

  Remove the 3rd PC of the 2nd router and plug it into the direct 1 router, remove the router 2nd the 1st in order to free the port. 3 all PCs are now on the same local network and communicate both IPv4 and IPv6, and homegroup should work.

  If you need additional ports provided by the 2nd router for other devices is not part of this problem then consider replacing it with a switch. If you use Router 2 for other devices Wi - Fi irrelevant then you need a wireless access Point.

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Turn off VApps before the DB migration?

  I'm under Director VCloud 1.5.2.x with a backend MS SQL 2008 R2 (2003 R2). I am preparing to migrate the Director and VC DB to a new SQL 2008 R2 (2008 R2 OS) server this weekend.

  What I was wondering is I have to turn off VApp running before migrating the database?

  Networks of VM/VAPP made if VC or Director's cut?

  I can't find any official documentation on this process. The info that I found a few States to stop the service, and to move the database.

  Stopping the service is expected to freeze the State of the DB. Networking is configured to the host. In theory, there is no need to turn off running the VApps

  Thoughts?

  Thank you

  -Joel

  You should not have to stop your workloads while they change state during the shutdown.

  ground handling, data movement, take old DB offline, run the script (to update the information of DB) configuration to start the services.

  You can get invited for certificates if you moved the file to original source on the bone of the cell keys.

  Also make sure you use the cell management tool for quiese the cells in your shutdown process.

• Installs the modem and the router and cannot get it to work?

  Recently, I disconnected and then reconnected my computer laptop Windows 7 and XP desktop to a Linksys router that connects to a cable modem Webstar. I did 4 or 5 times in the past with no problems.
  Two computers can connect with success directly to the modem. When it is connected through the router, they appear connected (i.e. connected to the local network) but cannot access the internet. I tried to switch, reset etc... checked the cables, without success.

  I tried a second router (Belkin Wireless G) I also used before, but get the same result. I appear connected but cannot access the internet, even if I can connect my laptop to other nearby wireless networks.

  If I try to connect from the network schematic page in Windows 7 it tries to connect using a PPPOE (no matter who is and gets a 651 error.

  I tried all the MS diagnosis/troubleshooting software available on Windows 7 but cannot id the problem.

  This should be simple, but I'm out of ideas. Any help would be greatly appreciated.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I have a Wireless N card and the router, but only to connect to wireless-G speeds

  I just got a new HP DV7T with a N (with bluetooth) wireless card: Intel Centrino Advanced - N 6200 AGN

  I use a Netgear wireless router (WNDR3700) double radio.

  My wife's cell phone can connect to the router with a N Wireless card at a speed of 170 Mbps.

  My laptop can connect only to 54 Mbps. I checked that I am connected to radio N of my router (the radio of G/B/A has a separate connection).

  I found a useful post here:

  http://h30434.www3.HP.com/T5/wireless-Internet-and-home/wireless-does-not-seem-to-connect-at-802-11n...

  I followed the advice of responses and checked all the settings of the router (but the success of my wife to connect at speeds N essentially rules on the router) and checked the settings of the adapter to make sure it helped N.

  I wonder what it is that I'm missing. Any suggestions would be greatly appreciated.

  Thank you.

  I was able to determine the problem after extensive web searches.

  I was using the WPA-TKIP authentication which, in some cases, prevents the speed N Wireless.

  Once I changed WPA2-AES authentication radio N I got immediately 300Mps speeds and it varies between 240-300Mbps now.

  I hope this will help others with the same question!

• Unable to connect to the internet when the router is connected.

  I had a wired router, model number befsr41 v4.3 but ports got fried and I sent in replacement and got a replacement today. But I can't connect to the internet. When I go into control panel > LAN data packets are crossing. When I start setting up the drive it says that it cannot detect the router and make sure that its properly connected and try again. I followed the instructions on the disk exactly, even if I knew how to set up. Any ideas on why this might happen? I never had this problem with the first router I had. I can't yet full access to the top of the page as it is said that its taking to long to connect and it didn't.

  You must configure the new router...

  If your Internet Service is cable follow this
  If your Internet Service is DSL follow this

• I have to restart my computer and I also want to re - install my CS6 software by downloading it from the Adobe Web site. I have to turn it off before restarting my computer?

  Hello

  It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software.  This frees an activation if you have the option to install the software on another computer at any time.

• I have uverse highspeed wireless modem. My office is connected to it and it works fine. My laptop connects to the modem, but does not connect to the internet.

  I tried to re-initializing modem and reload Explorer.  Any search engine will find internet.

  Hi Steveyy,

  1. you receive messages or error codes?

  2 have you tried to update the wireless card?

  You can read the following article and see if it helps:

  Setting up a wireless network

  Solve problems, find wireless networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.