I'll have to recharge my system in full, out of nothing, but the F2 to work with installation. Everything is gone, and my original disks were damaged.

Similar Questions

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• Games - i have halo 2 is installed on my pc... but the windows market reconise sound here

  I have halo 2 is installed on my pc... but the market windows recognizes no sound here

  Hello

  I suggest you post the same question in the Xbox forum and check if it helps.

  
  Xbox forums: http://forums.xbox.com/?xr=shellnav

  Halo 2 (PC): http://marketplace.xbox.com/en-US/Product/Halo-2-PC/66acd000-77fe-1000-9115-d8044d53080f

• I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  Hello hodginswill,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  https://windowslivehelp.com/product.aspx?ProductID=5

• I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

  Hello

   

  You did changes to the computer before the show?

   

  Method 1: Check the mouse on another computer and see if the clicks.

   

  Method 2: See the following article:

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

• I have an epson 520. I just changed my ink, but the ink levels that do not reflect on the computer. What can I do?

  I have an epson 520. I just changed my ink, but the ink levels that do not reflect on the computer. What can I do?

  Contact Epson for their advice.

• I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  Hello

  Do you use the WebHelp for the CHM converter script? If so, this screenshot may seem reasonable. If this is not the case, this isn't out CHM.

• Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...?

  Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...

  It was useful, now everything works fine!

  Felsherif December 23, 2013 right answer 12:51 AM

  I had a long discussion with a Support Agent and finally solved my problem in activating my root user... after a lot of trial and error/attemtpts. Here is my summary just fyi, I hope this works for you also.

  I'm on MacBook Pro OS X 10.8.5.

  1. They had me first go to ~/Library/Applications support/Adobe/OOBE and delete the file 'opm.db '... Creative cloud question remained.
  2. Then they asked me to go to support/Adobe ~/Library/Applications and rename the files "AAMUpdater" and "OOBE"... and go to the library/application support/Adobe (note this is a different path) and remane the files "AAMupdater" and "AAMupadaterInventory"... question remained.
  3. They had me also go to my Netwrok Prefrences, Proxy server to configure, and enusre all boxes are unchecked and "use Passive FTP Mode (PASV)" also unchecked... did not help, the question remained.
  4. Of course they had me uninstall and then reinstall the creative cloud application, which I did (Applications > utilities > Adobe installer and run the "uninstall Creative Cloud")... but the question remianed.
  5. Finally, they had me to visit this page on the Apple support page, http://support.apple.com/kb/ht1528 and activated the user root for OS X Lion.
     1. After allowing the root user (and create a new password for it), I rebooted my Mac
     2. Saved in my Mac once as 'root' and connected to Adobe Creative Cloud using my usual Adobe user/email name and password.
     3. Go to the 'Applications' tab, and it worked perfectly!
     4. I disconnected the root on my Mac, then that reconnected me.
     5. Launched the creative application of Cloud, connected and went to 'Apps'... works great!

• I have install the cut NET program and when I turn there's spoof arp say massage appear__it stopped working technology to give me an image that has shut the program___what can I do to make the net can work with system of visited

  I installed the program cut NET and when I turn there is massage appear
  IE is (spoof arp stopped working) is
  Give me an image that has me to close the program

  What can I do to make it work with the system visited the the net cun

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• My iPhone screen 6 is black but the phone still works as the sound goes in and out. I can't restart and have tried several times and cannot reset on iTunes because need to unlock my phone.

  I dropped my phone in a short distance and when I picked it up it the screen was black. However, the sound still works as I changed the switch works for her and he made noises. I also slightly see the apple logo when I turn on my phone and you can see the switch when I try to turn it off, but it is not entirely displayed, I can't see it in very dark rooms. I tried to reset the phone several times using the Lock and Home buttons at the same time and we have tried to connect it to iTunes to reset, but it does not connect due to having unlock my phone, I can not do. Any help would be appreciated.

  Hello CaffNutt,

  Thank you for using communities of Apple Support.

  I see that you get a black on your iPhone screen, even if it is enabled. I would recommend that you take a look at the following article:

  Get help with the screen on your iPhone, iPad or iPod touch

  The first two sections seem more relevant.

  Best regards.

• Should have 8 000 emails in my Inbox Windows Mail (Vista) considerably slow down my computer with 3 GB of RAM and trigger alerts from Norton of "the High CPU use by Windows Mail.

  In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?

  If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)?      .. .in windows Live Mail (Vista)?

  Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?

  I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.'  Gravity is the next, and what can I do to fix the problem?

  Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files?   This change of response if the e-mail is unread vs bed?

  #2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.

  I would also say this. Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  It can be very useful, and it can't hurt anything.

• I have a bluetooth hands-free, but it does not work with my laptop. How can I connect it?

  My laptop is Toshiba satellite L455D-S5976 with windows 7 Home premium 32-bit. Its display driver installation. You can the page where I can download the driver.

  [Moved from comments]

  Hi Sameer,

  1. What is the brand and model of the hands-free Bluetooth?

  2. what exactly happens when you try to connect the hands-free kit with the computer?

  3. have you installed the Bluetooth drivers on the computer?

  I suggest you follow the links that may help you solve your problem below.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I just installed Acrobat Pro XI.  When I went to start the program asked me for a serial number, which I have, but the menu drop-down did not include Pro XI and gave me an error message

  I can't not far as this screen because the serial number does not match any product on the menu drop down.

  Apparently, it sounds as if you have purchased an upgrade, which if so would have been a mistake. Of course, if this is not the case, check received. If still not sure please tell us price paid.