I lose my contacts if I restart my computer?

Similar Questions

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. "__What I can do to fix this? __Thanks

  When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
  What can I do to fix this?
  Thank you

  Hi Palaimo,

  See if one of the patches in the following link works for you.

  Snipping Tool fails

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• This product has met a problem whick requires that you restart your computer until you can run.  If you continue to see this message after you restart your computer, please contact your support of Adobe technicaln or administrartor IT

  I get this window when you try to open Photoshop CS4 (64 bit):

  =====================================================

  This product has encountered a problem which requires that you

  Restart your computer before you can run.

  If you continue to see this message after restarting your computer, please

  Contact your COMPUTER administrator or Adobe technical support to help you,

  by mentioning the error code displayed at the bottom of this screen.

  Error: 148: 3

  http://www.Adobe.com/support/

  ======================================================

  What should I do next?

  Try this:

  Adobe - Adobe licensing repair tool

  Melissa

• Firefox unresponsive after restarting my computer after having made changes in the settings of the history and cookies

  I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?

  If I uninstall firefox will be reversed the changes I made with cookies and my story?

  If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?

  Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
  Privacy, historical settings of navigation and-no-track

  If this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---

• computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem

  Hello

  I have problem with my computer, when I start the computer it shows "computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem" this error message and if I insert the USB the computer does not recognize the USB.

  Please let me know ASAP troubleshooting steps.

  Thank you & best regards

  Sashidara

  Hello

  I suggest that you start your computer in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the link below for more information on the clean boot troubleshooting.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Failure of a registry file - cannot restart the computer.

  Hello. So first of all I wanted to say that I am not an expert, but I think I've had more than my share of problems with my computer. Problems not only to get a virus, but questions of crazy system that I have no idea how they occur, or really correct.

  I have an Inspiron 1545, Vista service pack 2, 32-bit.

  In any case, I have some of my favorites showed it to my sister and I had a bunch of tabs open and Internet Explore was not load the pages to the right, it has happened and I just restart and it works again. I thought that if I manually restarted the computer, IE would my session was interrupted and when I opened it again it would open all my tabs unless I have to go find them and open them myself. I know that you are not supposed to turn off manually when you can actually go and press restart technially menu, but I did anyway... Well apparently, it was a big mistake.

  Now my computer does not restart properly. It gives me the option to restart normally, but when I hit, it indicates the green status bar briefly and then goes black and is sitting there, I did not leave very long sit, but I guess that it does not load. Then the other option is allocated to the repair of the system. He says "research issues" and "this may take a few minutes" and just, it scans and analysis, I have let it go a little over half an hour and it did nothing. I guess that he won't do anything if it does nothing in the first ten minutes. Then I hit Cancel and freezes the status on the scan and I manually restart and the same things happen. I press F8 and tried to go into safe mode and it loades among requirments system and then it's again once I didn't let it sit long, since I think that it won't work in all cases.

  I went to the System Center restoration and tried again to repair the system and the same thing... nothing happens. I tried to use a restore point, and to a point that one reason is cited even if I just made a couple months ago. In any case, it is said that since I was in a State of limited system may not perform correctly, I would in a higher State, but I can't have one. It also gives rose the failure of a registry file error and then code them (0x8007045D).

  I also tried to run the Pre Boot Assesment and he did the first part of the analysis (I don't have the rest) and it gave me this error - hard drive 0 (2000-0146)

  I read a little on the way to try to solve this problem online. I think if I can boot into safe mode with command prompt, I can run diskcheck and maybe it will fix what's wrong, but I have not tried yet, I tell myself that it won't work because I can't with regular safe mode. I also read something about starting in the Vista disc, but I don't really know what that means.

  My main fear is that I'll lose my stuff. I supported a few months ago, but I take a lot of pictures and I have not in the past months registered and they are very important to me. I'm afraid to lose. I don't know if it's something that I can fix it or if I should try a friend, or just take my computer somewhere.

  I hope no one will offer you is a hard drive problems and suggest you get a new, becaue some time ago I had some weird problem I couldn't fix it under warranty, I had the hard drive replaced and it did not fix the issue and I am not under warranty any more.

  So, can someone please help me? Thank you!

  Hello

  You can repair the system from the installation disc. It will replace the corrupted Windows operating system files.

  I suggest you to go through the steps mentioned in the link and the Coachman.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• my clock and calendar by default whenever I have stop, then restart my computer

  Hello: it started a few days ago. Booted up and couldn't get online. I noticed that the clock was distant time. back to zero time and still wouldn't preform. Then found out that the calendar had dates back to 2006. reset the calendar and everything has worked until I stopped and restarted then computer. The clock and the computer had
  flopped back at the wrong time and the year 2006. Now, every time I restart the computer I have to reset the time/calendar window before I can get online. Thank you for your time and help patten gerald * address email is removed from the privacy *.

  Hello

  This problem could be the BIOS battery.

  I suggest you to replace the BIOS battery and check how it works.

  You can replace the BIOS battery by contacting your manufacturer or shops local tech.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I restarted my computer and now she's asking user password and name. never had any username or password before how do after that?

  I have vista and you use the recpvery Manager to restart my computer. When he returned to the top I need a user name and pass word ot get in. I never used a user name and password before so I don't know what to do to get can in. someone help me.

  Thank you

  Hello

  Recovery Manager?

  you hear that you put it back to factory settings?

  If Yes, read this:

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  If it is something different from the foregoing gives all the details that we cannot help you with lost or forgotten passwords

  read this:

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Why do I always restart my computer (wireless) when I leave it alone for 30 minutes during the night?

  Acer (my computer) & Time Warner Cable (my internet connection) could not help me with these problems.  I have had this computer for 2 + years and changed a Linksys router to a router SMC (Time Warner router) ~ a year ago. No problems until 3-4 months ago.

  (1) when I'm away from my computer w/windows open or closed, I click my mouse to wake my computer. He then loses the internet connection. I used to have to restart my computer whenever I needed to use it (sometimes 6 times / day). Then I moved the router as close as I could - 2' reconcile (32 ~' router). Yet once, it worked w/no problems up to the ~ 3-4 mos ago. So, if I click my mouse & let stand for a few minutes, the Internet exploded (red "x"), then yellow and then blue (which means I have to then wireless). Now for the last two days, I'm back to having to restart almost everytime.

  (2) my email: when I opened my mail, I used to have click on the "receive" button (because they do not have their own) and then very slowly they came w / the mailbox Windows list 2 30, etc.. Sometimes I 3,4 & 5 copies of the same message.

  It is not the router because then my husband's computer (which is not in, but wireless is connected to this router) would not work.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Impossible to uninstall a program; error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue

  I downloaded a program on the internet, but now when im trying to uninstall it is showing this error message: cannot uninstall a program. error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue. What should I do please help.

  Hello

  you tell us the name of the program

  go to the website of manufacturers of programs and to find a way to uninstall

  or try this free program for her

  http://www.revouninstaller.com/

  and it is a program 'downloaded a program from the internet' search for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Restart the computer/Reboot

  I have to restart my computer.

  I assume you mean you want to reinstall Windows or restore it to the State of the plant. Since you forgot to tell us something on your computer, here is the General information:

  Most laptops and many OEM desktop computers (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.

  Otherwise:

  How to install Windows Vista - covers the upgrade and clean install -http://support.microsoft.com/kb/918884

  If you would like more information, please provide details by:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!