I lose my files if I do the update of windows 10?

Similar Questions

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• have we not back up our data to an external device before the update to windows 8.1

  have we not back up our data to an external device before the update to windows 8.1.

  update to windows 8 8.1 will affect the data in the laptop...

  @swati90

  If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

  If you're updating with an ISO will always give you the opportunity to register personal files.

  Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• How to upgrade all the updates of Windows XP from a single package?

  Original title: Windows XP updates

  Is there an SP4 or a package that contains all of the updates of Windows XP after SP3 is released?  It would be extremely useful to update all of the XP machines that do not have access to the internet.

  There will be a version called SP4 update by private parties. This update has been treated since September of 2012. Currently, they are still working on it. You can access this information to

  http://www.RyanVM.NET/forum/viewforum.php?f=5&SID=3058537efee42c994a4945a016f82cc3

  Hope this helps, they recommend you to read the info from the beginning. With files and information, you can create an ISO file that can be used to create a version of XP from microsoft that you can use in the future. I do not recommend to use a good firewall and antivirus program to protect your system like back up your system regularly.

  Personally, I'm going to build me a new computer.

• I recently did a full restore on my windows xp laptop and now the updates of windows do not work

  I'm totally frustrated.  I thought I was doing pretty good when I totally restore my computer as long as the plant.  but, to my surprise, I can't seem to get the updates of windows to work... Help

  Hi RoxanneQ, is required to use Windows to SP3 level out.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

• try to download the update of windows... error number: 0x8024400a...

  try to download the update of windows... all I get is "the website has encountered a problem and cannot display the page you are trying to view" error number: 0x8024400a the... no idea on how to solve this problem?

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at the level of Service Pack 3 before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012

• 'Check the updates of Windows', has not highlighted, lack of "Updates of history"

  My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?

  Thank you for your response. The Scaner Windows has the result of no viruses, etc..

  I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.

• Unable to complete the update of Windows vista KB2388210 get error 0007065E dt000

  I'm probably infinity less persona 3 to have encountered this.  Fix error MS can enter the line behind me

  I don't know if the installation is harmful to my health. did not cause me to lose sleep, just patience

  CK

  Update for Windows Vista (KB2388210)

  Download size: 3.3 MB

  Hello

  1. What is the exact error message you received?

  2. were you able to install other updates to windows?

  3. have you made changes on your computer?

  I suggest that you perform the clean boot and try to install the windows update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Install the update manually to the clean boot

  http://www.Microsoft.com/download/en/details.aspx?ID=12047

• Unable to download the update for Windows Vista

  Try to download the update for Windows Vista 28. MB (big enough file) download also refers to "KB980248.  He continues to show "failed" and "errors found." 'code 80070017' never had problems to download the updates of windows before.

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  The file is damaged or you need clean temporary files on the hard drive, etc.

  Have you tried a manual download of the update in question?

  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en

• Failed to check the updates of windows on Windows 7.

  OT: windows 7 updates.

  OK, I reinstalled windows 7 due to getting a new hard drive. Everything works well, the installation has functioned well. Although this problem happened more than once. A Microsoft disabled all the updates? It is very aggravating when you check updates and hours and hours, nothing happens.

  Does Microsoft support more on windows 7 updates? I use a computer that does not support windows 10, so please do not ask me to upgrade. in any case, my computer is healthy and good. I want to just the updates of windows 7.

  I am writing this message on my computer windows 8.1 is said by the way.  Please tell me not to make any change of setting. These updates to windows 7 after a relocation should not take hours to come to me.

  Thank you

  You can't solve a problem with Windows Update, based on the information you provided. The information requested will provide this information. To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or issue.

• Install the updates of Windows 7 not Windows 10

  I have more than 30 windows 7 selected updates and when I click OK it brings back me to the GET started installing Windows 10 screen. I want to install the updates, not Windows 10 and can't find a way to do

  Do you plan on installing Windows 10 soon?

  If this isn't the case - get rid of advertising for it in this way:

  Copy and paste the text below (and especially) the obvious markers in a text file, save it as "DisableGWX.reg")<-- changing="" even="" the="" file="" extension="" -="" if="" you="" cannot="" see="" it,="" you'll="" have="" to="" change="" your="" windows="" explorer="" view="" a="" bit="" to="" make="" this="" easier)="" and="" then="" use="" that="" (right-click="" on="" it,="" merge="" it="" into="" your="" registry)="" to="" disable="" the="" upgrade="" 'pushiness'="" you="" are="" seeing. ="" restart="" to="" get="" the="" full="">

  -COPY EVERYTHING BELOW THIS LINE-

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\GWX]
  "DisableGWX" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
  "DisableOSUpgrade" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade]
  "AllowOSUpgrade" = DWORD: 00000000
  "ReservationsAllowed" = DWORD: 00000000

  -COPY EVERYTHING ABOVE THIS LINE-

  Once this is done, you should be without the notification and your Microsoft Updates must return to its normal state.  If you ever want to upgrade to Windows 10 new (remember, this is a work in progress and if you upgrade already on this system and active - there is a license for Windows 10 you'll never pay for related to this individual machine for the life of this individual machine) you can probably use the media creation tool to make * or * reverse the registry values (all above (: 00000001 becomes: 00000000 and all DWORD: 0-0000000 becomes: 00000001) and save this file and MERGE again.  Restart and you are back where you were before.

  * TIP * for everyone out there.  One thing I saw not advertised on the option of restoration of 30 days you have with Windows 10 is that * if * you run the media creation toolat any point in these 30 days, it BREAKS the ability to restore - even if you did just to create an ISO image, so you should have the installation media to continue.  That's because this tool recreates the $' Windows. ~ BT' and ' $Windows. ~ records of the WS on the root of your C drive and these two folders and their content after the upgrade as well as the "Windows.OLD" folder (the only 'visible by default' one of the three) are all necessary for the process of restoration work.

  It's a little 'reflection', but the images (animated ones) could be useful at least some number of words is above this line...

  

  (Animated - GIF to display in a web browser for full effect.)

  (Same basic steps for Windows 7 users...)

  ... and JUST in CASE WHERE someone does not know how (in Windows 8.1) put in place their system so that they can see the file Extensions (the letters after the dot in filenames)--> here is a GIF to show you how:

  

  (Animated - GIF to display in a web browser for full effect.)

  (Yes, there are some similar settings in Windows 7 to see the file extension.)

• I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is it prevents to close?

  Original title: acro32.exe

  I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is he keep awake. What is and how to fix it?

  If you really see a message about "acro32.exe" is probably malware you should scan your computer with the virus eset online scanner and then download, update and run the free version of MalwareBytes AntiMalware.

  If, as is most likely, the message concerns AcroRd32.exe, the main executable file of Adobe Reader.  Go to control panel > programs and features and uninstall Adobe Reader.  If you have problems uninstalling Adobe Reader, see--> http://labs.adobe.com/downloads/acrobatcleaner.html

  Assuming that things patches, install Foxit Reader (free) instead--> http://www.foxitsoftware.com/Secure_PDF_Reader/

  Or, if you really want Adobe Reader back, go here--> https://get.adobe.com/reader/ (remember to uncheck the box to install McAfee Security Scan or any other 'add-on free")