I'm debating between the 100-400 mm F4. 5 - 5 6 the objective and the 300 MM F4L lens. Any advice?

Similar Questions

• Just starting to use flash CC pro using a PC. The mouse does not work on all popup windows. It works very well on the selection of everything etc, but not on the pop-up windows? Any advice? Thanks, Jim

  Just starting to use flash CC pro using a PC. The mouse works on everything except the popup windows. Any advice? Thanks, Jim

  kglad and Mohan, thanks for the help. I found what was wrong. I had the text of the rule too high DPI screen. I lowered and the mouse works on everything except that it's harder for me to see.HA apparently it was causing a conflict with the mouse. Maybe this will be useful to help someone else down the line. Thanks again, Jim

• Hi, the 'after' see doesn´t work on my computer, I can see only photos in 'before' mode. The part "after" is blue with a white cross. The situation appear in the browser. (LR 6) Any advice would be great, thanks. Chris

  

  Reach:

  Edit > preferences > Performance

  Lightroom > preferences > Performance (on Mac OSX)

  Disable the GPU acceleration.

  For Windows, you should go to the website of the manufacturer of your graphics processor and check the driver updates. Once updated you can try turning on GPU acceleration, otherwise leave this option disabled.

  Mac GPU, updates occur with updates to the OS.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Margin between the elements

  How can I set the margins between the elements. Is there any tool for that?

  Hello Michaels27513743,

  You can use spacing distribution panel align which can help you add some space between selected items and later you can combine them as well if you wish.

  You can activate the Panel line up of Windows > Align.

  If this isn't what you are looking for then please let us know what exactly you want to achieve and we will try to answer this question.

  Kind regards

  Vivek

• My iPhone does not load unless the cable is placed just to the right and the phone is still completely. Advice?

  Hey everybody. Since a few days, I have had a hard time charging my iPhone. It all started when my phone onto my computer. He suddenly began to vibrate, and the charging symbol flickered on and outside. Since then, I had to mess with the power cord plugged into the phone until it starts to load. Once it starts to load and remains always completely, is perfectly fresh. The problem is that I do a lot of work and outdoor recreation such as hiking, and I need to charge my phone on the road sometimes. But once I'm start moving the phone around, it does not load until I have reposition it. My phone had not been dropped, smashed, splashed with water, or something serious in several days or even several weeks before acting. This could be a software problem? I cleaned the inside of the charge socket and the charge lead works fine with other devices. I also restored the phone to factory settings and then restore a backup. Any advice would be appreciated.

  Clean the hole of the support and review it with a bright light. You must get it squeaky clean and without bending the rather delicate pins. And make sure that the bent pins.

• Hi all! I have a 3 out of 5, and I just bought the new goal of 100-400 L IS II.

  Hi all!  I have a 5 d Mark III, and I just bought the new goal of 100-400L IS II.  I have an EF 2 x III Extender, and I can't get the auto focus lens when using the Extender.  Can someone help me with this?

  Using an Extender X 2 double your minimum opening.  The opening of the 100-400 is 4, 5-5, 6, so if you double it is 9-11.  The maximum of 5 d 3 can autofocus is f/8, and I think that it is only the point central (and with the firmware?  I don't remember).

  Long story short, no AF with the 2 X.   With 1.4 x center point should work.

• Difference between the current and previous row in a table

  Hi all
  
  I'm having a problem with the request. Some help please can me?
  
  I need to get the difference between the previous row and current row in a table. I have a table, given as below.
  
  TABLEX
  ================
  
  Date items name
  
  AAA 100 01 - SEP - 09
  BBB 101 02 - SEP - 09
  CCC 03-AUG-09 200
  DDD 200 04 - SEP - 09
  EEE 05-SEP-09 400
  
  Now, I need to get an output like below...
  
  Name Date of items Diff-items
  
  AAA 01 / SEP / 09 100 0
  BBB 1 101 02 - SEP - 09
  CCC 03-AUG-09 200 99
  DDD 04-SEP-09 200 0
  EEE 05-SEP-09 400 200
  
  Can someone help me write a query to get above the results?
  Please let me know if you need more information.
  
  Thank you very much in advance.
  
  We use Oracle10G (10.2.0.1.0).
  
  Thank you
  Asif

  If you have found your answer, mark it as answered. Thank you.

• Tecra A4: The difference between the memory modules

  Hello.

  Could someone explain the difference between the modules of memory called PA3311U -1PA3311U and M25 -2M25?

  And is it possible to use Tecra A4 with PA3311U - 1 M 25?

  Thank you.

  Hello

  Tecra A4 supports these modules:

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  In addition, you can google a bit for cela other numbers of add-on memory and compare these parts. I m you will find a host of information

  Good bye

• Difference between the G20 and G25 models

  Hi people!

  I searched your laptop and I was amazed by the Qosmio.
  When I was going to order it, I noticed that there are many models of the G20 with different specifications. Also, I found G25 on internet research and found no difference between the G25 and G20 except receiver TV G25 is NTSC and G20 was released on March and G25 was in June. Instead, they have the same specifications for the hard drive.

  I live in the Portugal and the model Qosmio I can find that this is the G20-118. I was looking for the model that has 2 x 100 GB SATA HD, but cannot not thought about it.

  Internet research I found Qosmio G20-111 which has 2 x 100 GB SATA HD, but on the web page mentioned that it was a Pentium III processor (ridiculous, isn't?). I was looking for more reliable information.

  Already searched for toshiba pages and found no specifications for all models I found 490LS on the research on the web as the G20 - 102, 105, 106, 108, 109, 111, 118, 123,...

  Can someone help me with this? Are there any reliable web page where I can see the differences between the models? is there a .pdf or anyone who can please give me some advice?

  Money is not a problem at this time to acquire the laptop, I'm looking for only the laptop performance more!

  Best regards
  João Pereira

  Hello

  It of very difficult to say what camera is best, because there are many models with different parts.
  However, I found page with description of the G20 and G25.
  Take a look at this link.

  http://www.releasereview.com/Toshiba-Qosmio-G20-105-108-114.aspx?d=0101000580926052005

  Good bye

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• What is the difference between the KING and ACQWINDOW regarding the attributes of the camera?

  There are two sets of attributes for, left, top, width, and height.

  For example, there

  IMG_ATTR_ROI_WIDTH vs IMG_ATTR_ACQWINDOW_WIDTH

  MG_ATTR_ROI_HEIGHT vs IMG_ATTR_ACQWINDOW_HEIGHT

  What are the differences between the KING and ACQWINDOW?

  Thank you.

  Hi sunspotzsz!

  Vision consists of two main steps: acquisition and image processing.  IMG_ATTR_ACQWINDOW_WIDTH would the acquisition, and IMG_ATTR_ROI_WIDTH should be part of the treatment.  Therefore, if you set the ACQWINDOW_WIDTH to 100 so that numbers all pixels that are acquired will be set to 100, and they will be stored in a buffer.  ROI_WIDTH will use an image that is already in memory and 'zoom' so that the only part of the image you are watching / treatment.

  Also, take a look at this knowledge base on the Kings: KING FAQ you may find it useful!

  Kristen H.

• Canon EF 70-200mm f/4 L not as strong as mycanon account EF 100-400 mm f/4.5-5.6L USM IS

  Hi can't seem to get a strong an image with my 70-200 that I can with my 100-400 mm. should I get equally sharp photos with two glasses. I still have a warranty with best buy.

  What are your shooting conditions?  If you were less than 1/400 or the IS on the 100-400 could make a significant difference.  Try a controlled test, on a tripod, same settings, IS off.

• angles between the lines

  I am trying to find a way to understand the angle between the lines. These lines will always intersect. For example, if a line has xy of 100.0 and 100 200 values and the other line has a value of 0.50 xy and 200.50. These two lines when Wescott on a graph are 90 degrees to each other. I can just find a way to do this. Any ideas?

  Here's a way to do it. You can also use the mathematical functions to make it as Lynn suggested.

  Ben