I'm going oss my warranty when adding an SSD?

Similar Questions

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• When adding new record create id data and the static information

  Hi, I have a tabe datbase like this:

  CREATE TABLE 'paper')
  'id_paper' INTEGER (11) NOT NULL AUTO_INCREMENT,
  'sample_url' varchar (50) COLLATE utf8_general_ci NOT NULL DEFAULT ",
  PRIMARY KEY ('id_paper')

  
  When I add the new record, I need the "sample_url" field to automatically add this information:

  images/15_sample.jpg.

  images - is subfolder where my pictures are stored
  15. is id_paper (primary news NuméroAuto ID)
  _sample.jpg - static and must be added.

  I use adobedeveloper Toolbox to generate code with minor changes, I'm no guru php either.

  I retrieve my data like this:

  SELECT
  Paper.ID_PAPER,
  Paper.sample_url,
  Concat ("< img src = images /', sample_url, ' ' ' width ="66"height ="174"/ >") AS sample
  Of
  paper

  I use this code to add fields:

  Add columns
  $ins_paper-> setTable ("paper");
  $ins_paper-> addColumn ("sample_url", "STRING_TYPE", "POST", "sample_url");
  $ins_paper-> setPrimaryKey ("id_paper", "NUMERIC_TYPE");

  It's php for the text box:

  < b >
  < class td = "KT_th" > < label for = "sample_url" > sample_url: < / label > < table >
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  <? PHP echo $tNGs-> displayFieldHint ("sample_url");? > <? PHP echo $tNGs-> displayFieldError ("paper", "sample_url");? > < table >
  < /tr >

  
  What should I change?

  I think in this line here:
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  I need to add php code to get the primary key ID and my static text too, but how?

  Hello

  Well the modified code is irrelevent at this stage. The custom trigger should do the trick. Test on my test server here it worked fine. So, something is missing. I was even going to the point of adding nothing to the sample_url field and he was always fill the db.

  It's my registerTriggers

  $ins_paper-> registerTrigger ('STARTER', "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
  $ins_paper-> registerTrigger ("FRONT", "Trigger_Default_FormValidation", 10, $masterValidation);
  $ins_paper-> registerTrigger ("END", "Trigger_Default_Redirect", 99, "paper.php? done");
  $ins_paper-> registerTrigger ("AFTER", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("ERROR", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("AFTER", "Trigger_Custom", 50);

  Maybe you can post a txt file with the uninstall code?

  I really think at this point it's something small.

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• Satellite A665-S5170 - if dim display goes to sleep or when I start

  Hi, whenever my satellite A665-S5170 goes to sleep or when I start it up to the top of my screen resolution is very low and the only thing that solves it is to recalibrate the screen in color management settings.

  Does anyone else have this problem?

  And you have this problem on the first day?
  Do you use pre-installed OS original you got with your laptop?

  You have changed some settings?
  I put t know how to figure this dim resolution, but have you noticed the behavior even if you use different power plans and set for laptop in standby mode?

• Why is my phone not to give alerts text and goes straight to voicemail when I receive a call?

  Since I've upgraded to 9.2.1 my iphone 6 does not sound alerts for texts, notifications, whatever it is.  He also always goes to your voicemail when I receive a call.  A person must immediately call once again for my phone to ring.  Help!

  Have you disturb not active? Settings > do not disturb

• Money 2007 - I can't when adding an account a have the list of the banks of attachment

  Hello;

  I can't when adding an account a have the list of banks in connecting the answer indicates that the list is temporarily absent. Try again later, but without success. Thank you.

  These forums are in English only.  You want a French for Microsoft Money forum.  It's here: http://social.microsoft.com/Forums/fr-FR/money/threads

• How WMP 11 automatically copies the songs on record monitored when adding songs to the library?

  I mean, it's like the "copy files in the itunes folder media when adding to library" in itunes. its easier to have my songs scattered in HD

  Hi 70pride,

  Follow the steps in the article.

  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

  The Windows Media Player library: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-library-frequently-asked-questions

• I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please

  I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please :(

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Vista update problems. It goes in a loop when you try to update.

  Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Use of TCP Port when adding sensors to virtual machines

  What port TCP VMS use when adding a sensor to VMS security monitor, etc. Device Manager?

  RDEF listener uses port?

  Port UDP 45000 remained in IDS4.x or is it only required in ID 3 x?

  Thank you.

  A listener RDEP, if I understand the context of your question, is the process on the ID device that is connected to by customers RDEP (VEI, CTR, VMS / IDSMC). Since this is a server process, he listens to TCP 443. It can be configured to listen on TCP 80, but it is not a default setting.

  The only other default port used by Cisco IDS 4.x is TCP 22 (SSH) to access the CLI and some file copy operations (scp, for example). Again, you can configure the use of TCP 23 (TELNET) to access CLI, but is not a default setting.

  In summary, a device (IDS-42XX, JOINT-2, NM-CIDS) will have only two ports open by default. 22 TCP and 443. 22 TCP is used by SSH for CLI access and TCP 443 is used to access RDEP and IDM.

  Finally, UDP 45000 is not used by Cisco IDS 4.x; It was only used in 3.x and more for the former communication protocol.

  I hope this helps.

  Alex Arndt

• TCS wrong password when adding from MSD

  I have a problem when adding the TCS on the MSDS. MSD does not accept the password. I used the same admin for the CHT password when you access the web interface.

  TCS - tms.jpg

  

  Any clue?

  Thanks in advance.

  TMS uses the TCS API to communicate with the server, you must set a password for this account in the CHT under management > Configuration > Site settings.  See the administration of CHT Guide for detailed instructions, note this guide the administrator for version S7.0, but the configuration is the same for all versions of the TCS.

• I have a pdf form that has 4 columns, with each column having 28 check boxes and text between. I did so he goes by column, but when I do anything for a checkbox it takes it out of line. How can I keep that from happening?

  I have a pdf form that has 4 columns, with each column having 28 check boxes and text between. I did so he goes by column, but when I do anything for a checkbox it takes it out of line. How can I keep that from happening?

  You talk about the tab order? If Yes, go to Edit - Preferences - forms and make sure the box "Automatically adjust tab order when changing fields" is NOT checked.

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• Muse is so slow, especially when adding hyperlinks

  As a designer than a programmer, I love Muse, so similar to the sensation to Indesign. She allowed me to do at my site design is amazing, but...

  Now really worried that I chose the wrong software to develop my new site. Get slower and slowest of the day.

  Now cannot be used professionally.

  Every action is so slow. Multicolor spinning wheel is displayed continuously.

  The slower action seems to be when adding hyperlinks. Certainly, there is a little (about 150 per page over 100 pages, it's a ticketing site).

  When clicking on the hyperlink insert the window of the menu drop-down appears quickly, but I have to wait almost 30 seconds before I can enter the link and then another 30 seconds by clicking on back for the link to be accepted.

  30 seconds may not seem like a long time but believe me, it's when we look at a multicoloured spinning wheel. With 150 links per page, which is more than 2 hours of wasted time.

  Is there anyway to speed up this process? Is there anywhere in preferences to say Muse to reduce the number of previous installations of links used in the menu drop-down? If it would expedite the operation?

  Any help would be appreciated, because I don't want to renounce the Muse. Thank you.

  Yes, 2015.2 is faster. But... you can not expect the sedan city it will be a big truck. Different tasks have different tools. Muse is not really suitable for large sites. Not only because of the speed.
  CMS is a completely different usability, allowing to work with directories. Muse can't. Everything must be done manually, which leads to loss of time and difficulties with seo.